Reviews
It equips in combination with an external article step (with no bearing). Even if it goes away as the wearing itself removes and attaches a cover, it is easy. Since an effect has not run yet, it cannot be written in detail, but becomes that in whi
It equips in combination with an external article step (with no bearing).
Even if it goes away as the wearing itself removes and attaches a cover, it is easy.
Since an effect has not run yet, it cannot be written in detail, but becomes that in which the operation feeling of the shift pedal became brave, and becomes easy to take out a neutral.
I think that it is not the said improved efficiency parts which a horsepower goes up and which will be melted if Colet is followed, but it is cheap as compared with the same product of the other company, and they are parts good for trying once.
View detail
The CB400SF specifications III are equipped. (It becomes mag color) Since it is, a position can also choose a high grade feeling and appearance and texture ride easily, it is recommended.
The CB400SF specifications III are equipped.
(It becomes mag color) Since it is, a position can also choose a high grade feeling and appearance and texture ride easily, it is recommended.
View detail
Fits: YAMAHA TW225E, YAMAHA TW200, YAMAHA TW200
This will be discovered, if the step form of normal being never pleasing and the location of a step also think the thing kana ~ which does not become somehow and are looked for variously. Compared with the step position of this normal, a step moves to
This will be discovered, if the step form of normal being never pleasing and the location of a step also think the thing kana ~ which does not become somehow and are looked for variously.
Compared with the step position of this normal, a step moves to about 1.5? back, and moves to the location of about 1.0 ? up.
Since I was feeling that the normal step location had passed over a few with its feeling in the front, the kana which should just be improved since it is better was thought, and it purchased.
Although it is a several centimeters thing, if it actually rides, it will become easy to carry out the load to a step.
I think that the damage to the step holder of a step or a root will not be avoided if it should fall since a step makes a problem an angle at the time of a fall and it falls only about 40 degrees although this may be unavoidable one on a configuration.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI W800, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ400R, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI ER-4n, KAWASAKI 1400GTR, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZR-7/S, KAWASAKI ZR-7/S, KAWASAKI Z750 (water-cooled)
It has attached to 99ZX-9R. The variable peg was attached in order that POJIISHON in town riding might not fit nicely, if a back step was always used. Since there is no fall history, a weak point thing is not understood, but a grip is good, withou
It has attached to 99ZX-9R.
The variable peg was attached in order that POJIISHON in town riding might not fit nicely, if a back step was always used.
Since there is no fall history, a weak point thing is not understood, but a grip is good, without sliding with rain.
Since it can attach easily and some position changing can also be performed, it is tuning finely by liking.
Appearance is also kana well better than normal.
Incidentally, since it is not suitable for a circuit run, it is consent.
View detail
Since it sank in pure Faulk of GPZ900R too much when it was specification oil, he wanted to harden only a few and it was attached to him. Since it can adjust by a pre-road and air pressure can also adjust, and favorite setting can be performed, it is
Since it sank in pure Faulk of GPZ900R too much when it was specification oil, he wanted to harden only a few and it was attached to him.
Since it can adjust by a pre-road and air pressure can also adjust, and favorite setting can be performed, it is a recommend!!
View detail
It attached to 08FXD dyna super glide. After all, an ohlins is pliant and its degree of comfort is good. A small gap absorbs, as there was nothing completely, and it can pass with SUTOTSU that the big gap was also touch called a boss until now.
It attached to 08FXD dyna super glide.
After all, an ohlins is pliant and its degree of comfort is good.
A small gap absorbs, as there was nothing completely, and it can pass with SUTOTSU that the big gap was also touch called a boss until now.
Exchange was easy.
The frame was raised with the jack for cars, RR tire was floated, and shocks were only exchanged.
It is recommended.
View detail
The packing which occurs between a meter gear, a meter gear, and a hub bearing from a pure hub is transplanted. If this packing is not more shallowly inserted in a hub, garbage is likely to go into the direction of a gear. He put in quite more sha
The packing which occurs between a meter gear, a meter gear, and a hub bearing from a pure hub is transplanted.
If this packing is not more shallowly inserted in a hub, garbage is likely to go into the direction of a gear.
He put in quite more shallowly.
The accuracy has improved.
All screws are attached.
In the case of the Faulk appropriation of NSR, he does not forget preparation of the axle shaft of NSR in the case of the Faulk appropriation of NSR.
View detail
being aluminum shaving and coming out -- structure -- firmly -- it is carrying out. Since all bolts follow, it is not necessary to purchase it later. In order to use a pure speedometer, a meter gear is transplanted, but a crevice is made for a whi
being aluminum shaving and coming out -- structure -- firmly -- it is carrying out.
Since all bolts follow, it is not necessary to purchase it later.
In order to use a pure speedometer, a meter gear is transplanted, but a crevice is made for a while between a dust seal and a hub.
It may be necessary to put in Sim etc.
It can be used without for the moment dust entering.
View detail
Although there was a place which does not understand well which screw is used in part about attachment, it was able to attach in about 30 minutes. It is troublesome to remove the bolt of an engine mount. Since the change pedal is a direct system a
Although there was a place which does not understand well which screw is used in part about attachment, it was able to attach in about 30 minutes.
It is troublesome to remove the bolt of an engine mount.
Since the change pedal is a direct system as well as being pure not using many linkage mechanisms as well as being pure, a shift feel is very good.
About a position, even if it uses a hard position most, it is not felt that it changed that it was pure to there.
It will be called a smashing hard if a friend straddles my motorcycle.
If it asks for a hard position, we will recommend you the back step of six positions of Striker ARATA.
In addition, since the spring which connects a stop lamp sensor and a brake pedal is quite loose, I think some or other that a measure is required.
It is satisfied with that which also says appearance individually.
View detail
* Attach. Removal is very easy although the work which removes a sound hood is required. Since the shift guide itself is only attached with two bolts Even me who have seldom tampered with the motorcycle Attachment was completed immediately. * Using fe
* Attach. Removal is very easy although the work which removes a sound hood is required. Since the shift guide itself is only attached with two bolts Even me who have seldom tampered with the motorcycle Attachment was completed immediately.
* Using feeling The shift change made into the snap when the pedal was stepped on is comfortably. What the feeling into which a gear goes firmly gives sense of security, and runs is 笙ェ* price which became still more pleasant. Although he thought whether it would be slightly high before purchase It is satisfied with this price now.
They are parts recommended also to the beginner who have uneasiness in a run like me!
View detail
CB750 in 2001 to 2003 is the specification whose cost is most cut down in RC42 put on the market from 1992 to 2008, and is a type without the reserver tank of rear suspension. Since attenuation lost its effect by six years of use, when the price of th
CB750 in 2001 to 2003 is the specification whose cost is most cut down in RC42 put on the market from 1992 to 2008, and is a type without the reserver tank of rear suspension.
Since attenuation lost its effect by six years of use, when the price of the rear suspension with a showa reserver which is the brand-name parts in 2004 and afterwards is checked, it becomes clear that it is higher than OHLINS.
It purchased without wavering.
it also changes lanes and changes that attenuation is well effective, and passes and runs if it is a good pavement way of a state although the initial motion from OG to the entrainment 1G may move flexibly and it may be felt harder a little in proportion to the roughness and speed of a road surface at the time of a run -- etc. -- improvement in a response was felt.
Since setting is also already united with vehicles, it is also an agreeable impression that it is OK in bolt-on.
Although it is by no means cheap shopping, I think that it is not betrayed by the quality.
View detail
Although it arrived It is the highest result! Since a parts list is also finely intelligible, components place an order with SUGU also at the time of an emergency fall!
Although it arrived It is the highest result! Since a parts list is also finely intelligible, components place an order with SUGU also at the time of an emergency fall! View detail
Fits: KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KSR110
It becomes comment in wearing, about 1000 km of runs, and usable-years two months at 03 models. - Since strong point - and the pre-road regulating function, and the adjustment wrench are attached, it can be made favorite setting. - A price is chea
It becomes comment in wearing, about 1000 km of runs, and usable-years two months at 03 models.
- Since strong point - and the pre-road regulating function, and the adjustment wrench are attached, it can be made favorite setting.
- A price is cheap.
- It is above early to rust by demerit - and a picture, although it may be unclear.
It may park at a car barn with a roof, and may be use of commuting for only two months, and rusting this much may be slightly problematic.
- Since engine performance of enough is also in the top where a general comment - price is cheap, it is one article which we can recommend to you.
Although it has come also out of the kitaco and the engine performance is not known, since the merit and adjustment wrench of structure [ this one ] of appearance are attached, there is a profitable feeling.
View detail
The sake was equipped although the NASSERT-3D UP muffler was attached to the zephyr 750. A thing with an unreserved master cylinder of RIA is worrisome. Except it, the texture of parts is high, there is a rigid feeling, a motion is [ wearing is ea
The sake was equipped although the NASSERT-3D UP muffler was attached to the zephyr 750.
A thing with an unreserved master cylinder of RIA is worrisome.
Except it, the texture of parts is high, there is a rigid feeling, a motion is [ wearing is easy ] smooth, and it was easy to carry out adjustment of a brake or a shift pedal, and is satisfied.
Since the tandem step hit rear suspension (ohlins 36P) in my case, it missed outside with a 3-mm spacer.
The bolt which hooks the spring of it and a brake switch is too long, and it uses in the swing arm, choosing a suitable bolt at its own discretion.
Although a general back step differs in a design, it is recommended at BEET Hwang.
View detail
Fits: KAWASAKI ZZR1400 [ZX-14], KAWASAKI ZZR1400 [ZX-14]
Although the place which adjusts the location of a brake and gear changing required time, the rest is not so difficult for the place which suffered troubles by attachment. Since the tool which removes a clip is needed when merely decomposing a part fo
Although the place which adjusts the location of a brake and gear changing required time, the rest is not so difficult for the place which suffered troubles by attachment.
Since the tool which removes a clip is needed when merely decomposing a part for the cylinder of a brake, please prepare.
The attached touch rides sufficiently easily, although only three positions are changed.
Since the heel guard by the side of a brake was not attached and the bad point had to attach normal, I wanted at least it to attach it.
The rest is a place with the place quite appropriate for [ in a place ] Yasu to which the spring of a brake switch is attached.
but appearance -- it becomes smart and is satisfactory.
View detail
Fits: HONDA MONKEY BAJA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY
It is very beautiful and very much satisfied!! It is regrettable that the bolt for an optional dress-up up is too high!
It is very beautiful and very much satisfied!! It is regrettable that the bolt for an optional dress-up up is too high! View detail
Fits: HONDA MONKEY, HONDA GORILLA
although like [ foil carries out center appearance and ], a chain line can be taken out finely and found useful. It uses and is [ direction ] various, and it comes and is convenient.
although like [ foil carries out center appearance and ], a chain line can be taken out finely and found useful.
It uses and is [ direction ] various, and it comes and is convenient.
View detail
In disk-izing RIYA of the ape 100, this swing arm was purchased. The reason for having chosen the product made from G craft is beautiful [ structure ]. Since attachment is only changed with a pure swing arm, it is easy. Since the thing of excl
In disk-izing RIYA of the ape 100, this swing arm was purchased.
The reason for having chosen the product made from G craft is beautiful [ structure ].
Since attachment is only changed with a pure swing arm, it is easy.
Since the thing of exclusive use [ a chain slider ] is attached from the start, it is a kind design.
lightweight, since the good point and this product are made of aluminum.
- It is beautiful at buffing.
- A NSR50 wheel & caliper should be attached by bolt on.
it is hard to adjust bad point and chain adjuster (the portion which puts in a spanner is too narrow -- it is).
- It is expensive.
In order to disk-ize an ape, there are various methods, but I think that this product could be chosen.
Although the value stretched a little, a degree of satisfaction is the highest custom.
It is a recommend also at the swing arm made from G craft, and you.
View detail
a gorilla is custom alike and it is using it. When calling it the height of the accuracy of a G-Craft wide hub, and the beauty of processing, it is already a wonderful word. Joy with which it equips is felt. Since the bolt for disc brake rotor
a gorilla is custom alike and it is using it.
When calling it the height of the accuracy of a G-Craft wide hub, and the beauty of processing, it is already a wonderful word.
Joy with which it equips is felt.
Since the bolt for disc brake rotor wearing is also attached, it is not necessary to another order brand-name parts, and is conscientious.
NSR50 front fork, a G-Craft199mm general-purpose stainless, and Kitaco and 10-inch aluminum cast wheels are combined with this wide hub.
It is the maximum charm that the running stability of a gorilla becomes high with GUTSU with such a combination after all.
If disc brake-ization by 10 inches and a 199-mm general-purpose stainless can be considered, we will recommend you wearing by all means.
Damping force is also raised and it will become high [ a visual degree of satisfaction ].
View detail
Since the normal pedal is a little cheaper touch, a high grade feeling comes out. Since there is no big change efficiently, it is touch of if a form is pleasing. In addition, when it becomes hollow, it may be strong to the part breakage with a hin
Since the normal pedal is a little cheaper touch, a high grade feeling comes out.
Since there is no big change efficiently, it is touch of if a form is pleasing.
In addition, when it becomes hollow, it may be strong to the part breakage with a hinge?
View detail