Reviews
sounding good
I can't do it myself, so the person who did it for me said that FrontSprocket is very good, in terms of material and lightness, etc. Rear sprocket can be attached with either a pure normal thread screw or a taper bolt, according to the specs. View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Ninja1000SX, KAWASAKI Ninja650, KAWASAKI VALCAN S, KAWASAKI VERSYS1000 SE, KAWASAKI VERSYS650, KAWASAKI Z H2, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZX-25R, KAWASAKI ZX-6R, KAWASAKI 750Turbo, KAWASAKI ER-4n, KAWASAKI ER-4n, KAWASAKI ER-6f, KAWASAKI ER-6n
Stable SUNSTAR
I was not sure about BlackSteel, but I decided that lightness is justice.
I changed from 43T to 42T, but since it is Rear, I don't think it changes anything experientially.
Next time I will change Front as well and see how it goes.
View detail
Fits: SUZUKI GSX250R, SUZUKI V-Strom250, SUZUKI GSR250, SUZUKI GSR250 F, SUZUKI GSR250 S
Change from OEM 14 to 15
The OEMFront sprocket on the GSX250R had 14T and was replaced with a 15T for the purpose of reducing RPM on the highway.
If the Rear Sprocket remains at the OEM tooth count of 46, the speed difference will be about 6-7% if the RPM and selected GEAR are the same.
If high speed touring is the main purpose, the change from 14T to 15T is for Large.
TradeOff is also available, so there is no need to force replacement if you are not currently dissatisfied.
The following are three impressions from the trial run.
・Highway speed range is more comfortable
(RPMs are reduced at the same speed compared to the 14T, and vibration is somewhat suppressed)
Careful GEAR selection at low speeds and on uphill roads.
(Same GEAR, but with the same 14T feelings, it's awkward)
Gear changing on public roads will be slightly less
(less chance of using 6th gear)
View detail
Lightweight but fast-decreasing
Anyway it is light
Less than half of OEM?
also decreases quickly
Less than half of OEM
View detail
Fits: YAMAHA SEROW225WE, YAMAHA SEROW225, YAMAHA SEROW225S, YAMAHA BRONCO, YAMAHA SEROW225, YAMAHA SEROW225W, YAMAHA YZF-R15, YAMAHA SEROW225WE, YAMAHA YZF-R15
Stable SUNSTAR
The price is a little high. View detail
How nice
I had a motorcycle shop take a look at it and they said it really hasn't grown at all. View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZ450F, YAMAHA YZ426F, YAMAHA YZ400F, YAMAHA YZ250, YAMAHA WR450F, YAMAHA WR426F, YAMAHA WR400F, YAMAHA WR250, YAMAHA TZR250SPR, YAMAHA TZR250SP, YAMAHA TZR250RSR, YAMAHA TZR250R, YAMAHA TZR250, YAMAHA TDR250, YAMAHA SRV250S, YAMAHA SRV250, YAMAHA Renaisa, YAMAHA R1-Z
durability
I use it for its durability.
(10000-30000km)
View detail
Fits: YAMAHA YZ125, YAMAHA WR250F, YAMAHA WR250R, YAMAHA WR250X
It's nice and easy to ride!
I installed it on my WR250R
I have been doing both off-road racing and city driving, so I had an OEM 13 front sprocket, but I decided not to do off-road racing, so I bought a 14T to increase the size to a higher speed.
As for Merit...
No more need for busy SHIFT UP when sending outgoing messages.
Maximum Speed Up
Demerit is
Increased Downshift in traffic jams and on steep uphill slopes.
I think this is about it for Demerit.
As a result, I am happy with the change because I am riding comfortably.
View detail
Fits: HONDA V-TWIN MAGNA, HONDA CL400, HONDA CBX400F, HONDA CB400SS, HONDA STEED400, HONDA STEED600, HONDA CBR500R, HONDA CB400FOUR, HONDA VFR400Z, HONDA VRX Roadster, HONDA XRV750 AFRICATWIN, HONDA VF1000R, HONDA VF400F INTEGRA, HONDA VFR400R, HONDA VF750F, HONDA VF400F, HONDA VF1000F, HONDA VF1000F interceptor, HONDA CBR400F, HONDA STEED400
520Conversion
I was able to Conversion from 530 to 520. View detail
Fits: YAMAHA MT-10, YAMAHA MT-10, YAMAHA MT-10, YAMAHA MT-10, YAMAHA MT-10 SP, YAMAHA MT-10 SP, YAMAHA MT-10 SP, YAMAHA MT-10 SP, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1
I had a hard time removing the OEM.
The product is good, I wanted the Rear brake to work a little better and it worked.
However, there were many places on the YAMAHA chassis where the Torque was higher than the Service Manual, and it was very strange to loosen the Torque here too. I tried to take the wheel to YSP, but I was able to loosen it by warming it up with a burner and buying a proper tool. The screw ruined 1 pc. I wish I had at least used a hex. It was not an easy part to replace at home.
View detail
Fits: YAMAHA SR400, YAMAHA SR400S, YAMAHA FZR400, YAMAHA FZR400R, YAMAHA FZR400RR, YAMAHA FZR400RR-SP, YAMAHA SR500
Chain replacement
It is inexpensive and well made. I can usually see it.
Not at all.
View detail
Fits: KAWASAKI Ninja250, KAWASAKI VERSYS-X250, KAWASAKI Z250, KAWASAKI ZX-25R, KAWASAKI D-TRACKER, KAWASAKI D-TRACKER X, KAWASAKI KLE250, KAWASAKI KLX250, KAWASAKI Ninja250R, KAWASAKI Ninja250SL, KAWASAKI Z250, KAWASAKI Z250SL, KAWASAKI Z400, SUZUKI 250SB
Manufacturer for Peace of Mind
Circuit to change Final
Purchased
Chosen because I wanted to pretend to be Short
Chain slider also needs to be inspected.
It seems to decrease quickly.
It is a secure Brand and I had no problems with the installation.
The first time I removed the OEM's, I had a tremendous amount of difficulty.
View detail
Fits: KAWASAKI ER-5, KAWASAKI ELIMINATOR250V, KAWASAKI ELIMINATOR250LX, KAWASAKI ELIMINATOR250SE, KAWASAKI ELIMINATOR250, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT-03, KAWASAKI FX400R, KAWASAKI GPX250R II, KAWASAKI GPX250R, KAWASAKI GPX400R, KAWASAKI GPZ250R, KAWASAKI GPZ400R, KAWASAKI GPZ400S, KAWASAKI Ninja250, KAWASAKI Ninja250SL, KAWASAKI VERSYS-X 250, KAWASAKI Z250
light
I need to change Final to run Circuit.
Purchased
Duralumin and very lightweight.
I also feel that Motorcycle movement has improved.
Durability would be better.
View detail
Fits: DUCATI 600 SS, HONDA CB250R, HONDA CMX250, HONDA NC700XD DCT, HONDA NS125F, HONDA XL200RC, HONDA XL500R, HONDA XR350R, HONDA XR500R, HONDA XRX200R, HUSQVARNA TC610, KAWASAKI KL250 A, KAWASAKI KL250 C, KAWASAKI KLX230, KAWASAKI KLX300R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KTM 125 EXC SIXDAYS, KTM 250 GS, KTM 250 XC-W
Cost-effective
Replaced with SUNSTAR Chain after 15,000 km as the OEM Chain had outgrown it.
The front and rear Sprockets were also replaced with Kawasaki OEM at the same time.
The effect of replacing the Chain, which had been fully extended, is that it is able to transmit power very smoothly.
We recommend this product as it is more cost-effective than other companies' ChainManufacturer products.
View detail
Fits: HONDA CRF250RALLY, HONDA CRF250L, HONDA CRF250M, HONDA CBR250R, HONDA CB250R, HONDA AX-1, HONDA XR250, HONDA XR250 BAJA, HONDA DEGREE, HONDA XR250Motard, HONDA CB300R
Front sprocket15T CB250R
HONDA CB250R's NORMAL is 13T, but we changed it to 15T because we have to turn the Engine on the highway. No modification is required and it can be installed with Bolt On.
No readjustment of the speedometer is required.
With the NORMAL 13, the Meter display showed 88 km/h even at a GPS speed of 80 km/h, which is about 10% higher. However, after replacing the front sprocket with a 15T, the GPS speed and Meter speed are now almost identical.
I expected to see an increase in distance in terms of fuel consumption, but the higher GEAR ratio and higher engine load offset this increase. However, the higher GEAR ratio and higher engine load offset the increase in speed, and fuel consumption was essentially unchanged from the time when the engine was in NORMAL 13.
View detail
Fits: DUCATI 888 SP5, DUCATI 888 SP4, DUCATI 851 STRADA, DUCATI 851 STRADA, DUCATI 851 STRADA, DUCATI 851 STRADA, DUCATI 851 STRADA, DUCATI 851 SP3, DUCATI 851 SP1, DUCATI 851 SP2, DUCATI 888 SPS, DUCATI 888 STRADA, DUCATI 750SPORT, DUCATI 750SPORT, DUCATI 620 SPORT, DUCATI 620 SPORT, DUCATI 600SS, DUCATI 600SS, DUCATI 600SS, DUCATI 600SS
Controlability
Before the replacement, there was rust on the surface (especially on the back side), and it did not work comfortably when I stepped on it, and there was a strange noise, but after the replacement, the noise disappeared and it works well and is easy to control. View detail
Fits: SUZUKI 250SB, KAWASAKI ZX-25R, KAWASAKI Z400, KAWASAKI Z250SL, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI VERSYS-X250, KAWASAKI Ninja250SL, KAWASAKI Ninja250, KAWASAKI KLX250, KAWASAKI D-TRACKER X, KAWASAKI D-TRACKER, KAWASAKI Ninja250R, KAWASAKI KLE250
Might be a good idea!
When I replaced the Rear Sprocket, I also replaced the Front Sprocket. As expected, I feel that the new front end is smoother than the old one! View detail
Fits: HONDA CBR900RR, HONDA VFR750F, HONDA CBR1000RR SP, HONDA CBR1000RR, HONDA CRF1000L DCT, HONDA CBR650F, HONDA CRF1000L, HONDA CBF600, HONDA CBF600 S, HONDA CBR600F4i, HONDA XL1000V Varadero, HONDA CBR1000RRR SP, HONDA CB650R, HONDA CBR650R, HONDA CBR1000RRR, HONDA NR750, HONDA CBR600F, HONDA CBR600F Sports, HONDA CBR600RR, HONDA CB600F HORNET
SUNSTAR Front sprocket 525–16T
Prices were about the same as OEMSprocket.
There is a Black color surface treatment that hides it but looks good.
The weight is lighter than the OEM model due to the lack of rubber for running noise control. The installation itself is not too difficult, but when working alone, you need to pay attention to safety by properly securing the motorcycle so that it does not move.
View detail
of good quality
I bought the same one last time to replace it, but the chain didn't seem to be extended at all, even when I measured it. Is it OEM from somewhere else? View detail
Fits: YAMAHA TZR250RS, YAMAHA TZR250RS, YAMAHA TZR250SPR, YAMAHA TZR250SPR, YAMAHA TZR250SPR, YAMAHA TZR250SPR, YAMAHA TZR250SPR, YAMAHA TZR250R, YAMAHA TZR250R, YAMAHA TZR250R SP, YAMAHA TZR250R SP, YAMAHA TZR250R SP, YAMAHA TZR250R SP, YAMAHA TZR250RS, YAMAHA RZ250R, YAMAHA TZR250, YAMAHA TZR250 SP, YAMAHA TZR250R, YAMAHA R1-Z, YAMAHA R1-Z
Rotor
Parenthesis has gotten better☆It stops normally, so it may not be a problem. I've only ridden it a little bit, so when it hits, I'll be able to show my true colors. View detail