Reviews
PinGelCook
Shipping is on schedule!
I was able to place my order with peace of mind.
View detail
PinGelPlate
It is essential to install PinGelCook. View detail
Used to install Cook by Go Lamp Roducts
Used for Fuel Cock installation by Go Lamp Roducts.
The tank hole was enlarged with a file so that the filter could be inserted, the tank was cleaned, and a fuel fliter was installed after cooking just to be sure.
Tank mounting surface is flattened with oil stone and Liquid Gasket (How to paint Large thing) Seal tape also for use and installation Bolt (Winding Large thing) and Liquid Gasket, and I think I was able to install it perfectly without any blotches after drying overnight.
View detail
Fits: KAWASAKI Z1-R, KAWASAKI Z1, KAWASAKI Z1000 (air-cooled | KZ), KAWASAKI Z1100 GP B2, KAWASAKI Z2, KAWASAKI Z750, KAWASAKI Z900, KAWASAKI Z1-R II, KAWASAKI GPz1100F, KAWASAKI Z900, KAWASAKI Z750, KAWASAKI Z2, KAWASAKI Z1100 GP B2, KAWASAKI Z1000 (Air-cooled|KZ), KAWASAKI Z1-R, KAWASAKI Z1, KAWASAKI Z1-R II, KAWASAKI GPz1100F
To KawasakiZ1
PinGelCook and NaturallyQuantity:I bought this in a set. At first, I was worried about getting the right angle because it was screwed in, or if it would leak. I'm glad I bought it. View detail
To KawasakiZ1
I installed this carburetor when I switched to TMR. it has reserve, no lack of flow, and no leaks even after several years of use. If you are replacing a 6mm hose carburetor with an 8mm hose external carburetor, this is a good choice. View detail
Parenthesis good?
Adapter and Quantity:I bought it in a Set, but Parenthesis got better. View detail
You're early!
PinGel's Fuel Cock and Quantity:I bought it in a Set, but it was a fast response, and Motorcycle became Parenthesis well. View detail
Performance and texture are both good.
It was easy to install. I thought it was expensive, but the texture is very nice and cool.
Just in a few days, Plating got Rust cloudy. It's also very easy to operate.
View detail
Accuracy and texture are good.
I used it for PinGelCook installation. The texture accuracy is very good.
It's easy to install and can be done by anyone, and it's the perfect companion for your fcr.
View detail
To divert the tank of a SEA BASS car
I used it to divert the tank of DRZ400 to DR250R of SEA BASS
I managed to avoid the interference with the Frame and Engine hanger on the back of the tank by beating it I did, but there was nothing I could do about Fuel Cock
Both DRZ's and DR's come too far down and interfere with the cylinder head or cylinder I will
This is where I came up with the PinGelCookAdapter
It was originally intended to be used for Kawasaki's ZrX1100/1200, ZEPHYR, etc The Pitch for PinGelCook is the same as the Adapter for PinGelCook This is a miracle that happened
Of course the bolt diameter is the same, so you can put it on as it is
Originally I would have installed a 1/4 NPTPinGelCook here, but my budget is limited and There are, therefore, Harley-Davidson and others sold by Guts Chrome I used a Brass petcock like the one used on the Custom car
The mounting diameter is the same 1/4 NPT, so it comes standard
I wrapped a seal tape around it just to be sure, but it doesn't bleed gasoline It was
This Brass petcock is very small, so it helps to avoid interference even more They gave me
No one will do this, but you can use it this way
If you are not satisfied with the flow rate of the DRZ, you may want to consider using High flowCook is easy to do
High Camshaft&FCR Carburetor Body I've never heard of putting Carburetor in and spinning it around, but I've never heard of it being enough & hellip; lol
View detail
Fits: KAWASAKI GPZ750R NINJA, KAWASAKI GPZ900R NINJA, KAWASAKI Z1000 (air-cooled | KZ), KAWASAKI Z1000 (air-cooled | KZ), KAWASAKI Z750 FX I, SUZUKI GSX1100S KATANA, SUZUKI GT380, SUZUKI GT380, SUZUKI gsx1100s katana [katana]., KAWASAKI Z750 FX I, KAWASAKI Z1000 (Air-cooled|KZ), KAWASAKI Z1000 (Air-cooled|KZ), KAWASAKI GPZ900R NINJA [Ninja]., KAWASAKI GPZ750R NINJA [Ninja].
This is cheaper to buy!
It's a Birdie, but I use it to mount the Powko Cook from FOR HARLEY
It is also possible to use a different Offset to interfere with the Carburetor and Cook It is also beneficial for avoidance
The Tap is a bit special, so it's a bit sluggish to make it yourself …
View detail
The product is very good!
I'm not happy with the pictures on the product page
The picture on the product page is of Quantity:1pc. only, Quantity:2pc. SetWasher is in the picture But the number of injections is 1pc
From the perspective of the person who ordered it, I feel beaten
I had to look at the description carefully
View detail
It was not a free Cook
Switching of the original Cook became frustrating, so I exchanged it with a good reputable PinGel.
The vehicle is ZEPHYR 750.
For the installation please see the diary.
I exchanged it and tried running, but the engine attachment has improved considerably. Rhythm of running was improved as the stiffness when Axel was turned from low rotation was reduced.
There is only thing singing MoreGAS! And this kind of effect seems to be obtained when fuel is sent to the carburetor to Smooth, so it is good compatibility with FCR Carburetor Body.
I did not expect that running would change with just one Cook. It is a pleasant miscalculation.
View detail
PINGEL Adapter Plate for 1/4NPT Cock - good choice - i'm satisfied
A very good quality. Complete set - adapter, bolts, gaskets approached the Yamaha XS 850 tank. Used together with petcock 1/4 NTP twisted well - no need to use glue for additional sealing cutting allows you to screw without glue Also pleased with the availability of additional gaskets for hermetic sealing fast delivery - only two weeks from the moment of the order. View detail
There is only high.
I installed it in the SR. External carburetor, Bore up vehicles OEMCook does not have the fuel falling Speed ??so I will recommend the exchange. The lightness of Lever when switching to Reserve is also attractive! View detail
Very well made fuel tap and easy to install. However the fuel tap lever is very loose which I'm not used to it and you will need to shut it off if bike is not running. One downside is that because the lever is very loose, it is very easy to accidentally m
Very well made fuel tap and easy to install. However the fuel tap lever is very loose which I'm not used to it and you will need to shut it off if bike is not running. One downside is that because the lever is very loose, it is very easy to accidentally move to a different position such as to off or reserved position. You will need the mounting plate which is from Pingel as well for a Suzuki Katana bike. This is a 4000 series model and works fine with my bike. Would I recommend people to buy it? Definitely!!! View detail