Reviews
I upgraded the stability feeling to the Large width.
【What made you decide the purchase?】
I was worrying about it for a while, and my acquaintance was installing, I bought it when I heard the effect.
【How was it actually used?】
Grom 's soft Front fork becomes a little tightly.
Although the movement of Front fork is also improved, because steps can not be stepped on, the steps etc will not change, it will be don!.
The sharpness of straight-ahead Handlebar will disappear and it will be easy to ride.
Because I attach Handlebar Stopper, Small turning becomes worse.
【Was it difficult to install? (Hard parts case)】
I heard that Bolt is stiff, but if you prepare an accurate hexagon you can remove it without problems. I tried to install because the size of the hexagon was different on the upper and lower sides, but I finished it safely with the prescribed Torque with the hand tool. Regulation from NORMAL Torque is low, so be careful.
【Please tell me the point of installation and hang (in the case of Hard parts)】
I also wrote the above, it is not so difficult if I move forward one by one firmly.
Tightening properly will cause problems such as thread cutting and mountain crushing.
Let's secure it in Torque wrench for safety.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
[Is there anything I was disappointed about?]
Instruction Manual is easy to understand, even if you are an amateur you can do with tools. But I wonder if the picture of Instruction Manual was hard to see ...
【Hope for Manufacturer - Please let me know if you have any improvement points]
Performance is satisfactory, but if the price is a little cheaper it is a full mark.
【Have you compared items?】
None
[Others]
When Air Filter is replaced with Takegawa or Endurance, Bolt seems to be hit by Air cleanerBox.
I was hitting the acquaintance, but he said that there was no problem.
And, it has become convenient to the ground sometimes.
When hanging Handlebar Lock, when it was not attached, it was locked a bit back from where you completely cut the Handlebar, thanks to the included Handlebar Stopper, the fully locked state becomes the position where the Handlebar Lock is possible and the lock is easy became.
It is convenient to the ground.
View detail
Overall rating 5
Because the Frame bent slightly after hitting the Front in the accident, I bought OUTEX 's Stem Stabilizer for Front enhancement.
When removing Fork 's Bolt at the time of installation, I tried to remove it with a cheap Hexagonal Wrench, so the hexagonal hole got licked (Lol)
I immediately took them to the Motorcycle shop and removed them and installed them..
Although it was impression after riding after installation, it became a feeling that Grom was on a slightly larger Large Motorcycle, handlebar operation became easier, and it became Large but it was not scary even with one handlebar.
I think that this COSPA is pretty good at 10,000 yen level.
When I remove it I think Fork 's Bolt was a demon Torque and I think that it is super easy if I do not do it properly in Wrench.
View detail
For noise control
It is not from Wee Big but from HP of OUTEX, but I tried purchasing.
Actually it is for 33 pie x 60 l 100 Cell plug-in type 38 pie.
When exchanged to High Camshaft, I bought it because it felt annoying as exhaust pressure increased.
As a measure against noise, I was able to suppress the exhaust pressure, so it was effective enough to understand even by the bodily sensation. (Bababa -> papapa ---)
I felt the elongation of the medium and high speed range fell when traveling.
As for installation on the FMF, it is attached to the Silencer, not the Exhaust pipe side,
Because o 2 Sensor comes in contact, drilling and returning are attached to Pipe, so it will be necessary to cut, etc..
Although it is originally a product of measures against waste Gas, it is also effective for noise control.
View detail
Fits: Others , KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, その他 , KAWASAKI D tracker, KAWASAKI D Tracker X
The range of Tire selection spread
Regarding installation, we carefully read the Instruction Manual, and after Image Training by watching YouTube's enforcement video several times. In the operation work, I thoroughly cleaned the BALI and degreasing of the welding part of Rim.
Because it was work in the room in the midwinter, we took advantage of kerosene Stove and Dryer to improve the adhesion of Tape. Preparation is important.
Once you have done so far, you just paste the tape straight. Even if a little air bubbles entered the air did not leak.
At first it is recommended to stick from Rear, because Rim width is overwhelmingly easier to paste, so it will be practice.
All we have to do is quickly install the Tire and fill the Air pressure higher.
I used imprints, but honestly I did not feel the weight under spring weight.
I think that spreading the range of Tire by putting Tubeless tire is Merit of the largest Large.
View detail
Purchase as wobble countermeasure
Tire was changed from OEM to BS 10 of the BS, so that wobble occurs from a certain speed
became. It is obvious that Tire is the cause, but because it is not cheap,
We have to crush, we watched the product there.
I tried it after installing, but it does not occur even if it exceeds the speed that was previously occurring
Well, it will still occur at higher speeds.
In addition, it may occur rarely even in the speed that was previously occurring.
It will happen if something goes well, but its swing is better than before
It is small..
In conclusion, wobble can not be suppressed perfectly, but there is certain effect.
It will be.
View detail
Fits: KTM 690SMC, KTM 690SMC R, KTM 690SMC, KTM 690SMC R
Satisfied with Orange
【Applicable model】
KTM690SMC-R 2012'
【Why Anodized?】
I installed Aluminum Ground from the price point, but I could not remove corrosion well and the gloss completely disappeared,
I really bothered and decided to purchase an Anodized version at last.
【Why Orange】
After troubling with Black, KTM is still the place called Orange.
【Problem】
It is only price side.
View detail
Fits: APRILIA SXV450, APRILIA SXV550, DUCATI sports classic, DUCATI Pole Smart, KTM , Norton command, SUZUKI , SUZUKI DR-Z400SM, TRIUMPH Thruxton R, YAMAHA TW200, YAMAHA TW225, その他 , その他 , その他 , その他
Especially, you can experience the effect in Large on Front
Front - We installed both Rear,
I think that it is easy to experience the effect especially at the Front when doing fine cut at low speed.
In the case of Tube tire, when a nail sticks,
In many cases, immediate running becomes impossible,
By doing this construction,
The point that we can reduce one uneasy factor is also the big advantage of Large.
Construction takes a little time and effort, but it is not difficult,
I think that you can get Merit over time and time spent.
However, galley etc.. When you use a method of using the air pressure to drop Large when running,
Because there is a danger that the Bead will fall during driving,
It is not recommended for those who do such operations.
Finally, when installing this Parts,
In the commentary movie, I was working with Wheel facing sideways,
Wheel is oriented vertically and it is constructed by rolling Wheel towards the back,
I think that it is easy to construct it because it can find the bend early..
View detail
OUTEXOUTEX Honeycomb Catalyzer
I exchanged for the SCP Project Full Exhaust System, but I was considering an Inner baffle where the Exhaust Volume was Large, I found this baht.
Since it was possible to change the Flange outline, Flange fixed position, it was possible to mount it perfectly in Size.
The Exhaust Volume in question, Idling - Although it does not change in the low revolution range, acceleration - A decrease in Exhaust Volume was obtained in the high revolution range.
I think that Power and Torque are not depressed..
Regarding price, I am satisfied because it is a special part and there is no additional fee for changing Size.
Although it is not an objective purification of the original exhaust gas Gas, it is possible to suppress Exhaust Volume and furthermore if exhaust gas Gas can also be purified, it is one stone two birds.
View detail
I understand why MOTARD is popular!
I used it for Grom 's 181 cc full Custom.
At the beginning, I thought that it was Fashion parts, with only knowledge about Parts popular in MOTARD.
However, when I joined Grom Meeting the other day, there were two people attached.
When I asked, the rigidity feel of Front seems to be up!
I will search on Web of Bae Waile immediately.
There is OUTEX made.
Please give me an Order soon..
The product arrived two days later, when I tried to install it, the rigid feeling has really improved Up! Full Brake etc. can now be applied with confidence.
Even if there is a Gap in the corner ring, it gets pretty shaken and the passage of ZebraZone has become easier.
As a fashion part, there is a sense of attachment.
This product can be Recommendation!
View detail
Fits: TRIUMPH BEHR, TRIUMPH Thunderbird Sports, TRIUMPH Tiger 955i, YAMAHA XT660X, その他 , その他
This product easy to use.The detail of using is perfect.The customer should be careful about the size of front and rear wheel before order.Thanks.
This product easy to use.The detail of using is perfect.The customer should be careful about the size of front and rear wheel before order.Thanks. View detail
Fits: APRILIA SXV450, APRILIA SXV550, DUCATI sports classic, DUCATI Pole Smart, KTM , Norton command, SUZUKI , SUZUKI DR-Z400SM, TRIUMPH Thruxton R, YAMAHA TW200, YAMAHA TW225, その他 , その他 , その他 , その他
Movie attached to YouTube
Off I am enjoying myself to remodel the car to MOTARD.
In my case I run a thousand kilometers a day or more, than lightening around the foot, correspondence at the time of Puncture and Spare Tubeetc. Purchase for luggage reduction. I constructed it myself.
Manufacturer on YouTube has upwarded the animation of the construction method, and anxiety is alleviated.
But construction was a little Large strange.
Rim of KTM 690SMC is good, welding mark etc etc. Even Beauty had been treated, because the thickness was enough, the labor was Large strange but there was not much difficulty.
The thin Wheel felt like using air bite → air leakage.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
Step up with Upfootpeg !!!!
Time was not shortened so easily ...
OUTEX's Up Footpeg Bracket
DRC 5mm Up Wide Footpeg
I was able to raise footpeg a total of 12 mm
As for replacement, removal of OEM's Bracket is the largest Large change
People without Impact are safe to have them removed at the Motorcycle shop
Brake side can be misplaced by removing the Pedal axis and MASTER.
Although it aimed at improving bank angle and operability of Pedal, the former could be improved and the latter would not change very much
People who do not run like Dirt like Brett's Tilt Footpeg regret that it might have been better to put a footpeg on it
View detail
Fits: HONDA , HONDA CRF1000L Africa Twin, KTM 950 ADV, KTM 990ADV, TRIUMPH NEW Tiger 800XC, その他
Construction to gain peace of mind during Touring, but thin Rim is difficult
I attached it with DIY on the Tire exchange of TIGER 800 XC. As I go to Hokkaido Touring in the summer, when I puncture in the middle, I can not just repair Tube tire of heavyweight Motorcycle, so in order to get relief,.
Since Rear is Tire Width 150, there is also a reasonable Rim width, so it is OK without problem with the Instruction Manual street. 0 in the first 2 days. I thought it was a failure when the air pressure decreased by about 4k, but after that it has been stable for 2 weeks so it will be Large durable.
For Front, the width to be constructed with 90-width Rim also becomes narrower. Construction itself is the same as Rear but 1 day after Tire incorporation 0. I keep decreasing by 4 k and finally almost entirely dropped. Raise the heavy waist and put water in the taray and check it and there is air from Spoke - - -. When Tire is removed, Lever seems to hit and just the same scar of Elear as Niire as Tire Lever (Tear). Apparently it seems to have hit when trying to organize Tire. Tire Lever is easy to win if it is a thin Rim, after all it has done the same thing again after all. It is stable now, but it would be better to leave the uneasy one to Shop. Especially thin Rim.
Even if it fails, materials are left in for repair, and it is saving if it is easy to repair.
Later release from worry of Puncture repair (You can do with repair kit, you can do it at service station too) Are you Large?.
View detail
Fits: HONDA CRF450F, HONDA CRF250R, HONDA CRF450F, HONDA CRF250R
Good design. Easy installation on my enduro Honda CRF450X. Improved handling, reduced vibration in the handlebar, during a heavy braking the bike stays straight. Best stability during driving of the motorcycle.
Good design. Easy installation on my enduro Honda CRF450X. Improved handling, reduced vibration in the handlebar, during a heavy braking the bike stays straight. Best stability during driving of the motorcycle. View detail
Fits: HONDA SUPER CUB110, HONDA Wave125-i, HONDA CROSS CUB
Installation is Large strange but excellent.
Installation time requires a whole day. Substrate treatment, cleaning, degreasing, pasting, Air putting. Since it affects the adhesive force of Tape, it is degreased - Wash especially carefully.
The last Air entrance is Large strange. Bead will not go up so Air will not enter at all. It is also handy to leave it to the Tire shop. Air momentum is also necessary so Air Compressor is necessary. I am Belt (With La Ticket) I screwed up Tire with. Tire will be tightened up strongly enough to become Tan. Because Air enters, it inflates. Timing to remove Belt is difficult, Belt comes off and pressure fly, so please be careful.
It will be light weight. It will be a light ride comfort. I will not be able to use up to the Tire groove girly, but I'd like to exchange early Tire for safety. It is lightweight but it is effective.
View detail
FMF Powercore4 requires many things to be considered in my case, so I looked for an exhaust that looks good for a commute to work and reached this product. The volume is not so quiet but not so noisy and the characteristic sound of the single-cylinder eng
FMF Powercore4 requires many things to be considered in my case, so I looked for an exhaust that looks good for a commute to work and reached this product. The volume is not so quiet but not so noisy and the characteristic sound of the single-cylinder engine seems deadened. I am personally fond of it. (with baffle spec.) I think powercore4 surpasses this product in power output at low/middle speed and in throttle response. However, compared to an OEM exhaust, it is cost-effective in how titanium exhaust pipe is burnt, its weight, how well exhaust gas flows, and the sound.
The exhaust itself is so beautiful that I hesitate to ride on forest roads or in closed courses. Set-ups by the sub-computer(i-con iii) gives me a good ride.
View detail
Fits: APRILIA SXV450, APRILIA SXV550, DUCATI sports classic, DUCATI Pole Smart, KTM , Norton command, SUZUKI , SUZUKI DR-Z400SM, TRIUMPH Thruxton R, YAMAHA TW200, YAMAHA TW225, その他 , その他 , その他 , その他
In the case of an ELIMINATOR 125, since there is no Size, it is that a maker is consulted with on it. The price was about about 12000 yen.I think that anyone can do those who can do desorption of the Wheel.For the moment [ ] (equipping about on
In the case of an ELIMINATOR 125, since there is no Size, it is that a maker is consulted with on it.
The price was about about 12000 yen.I think that anyone can do those who can do desorption of the Wheel.For the moment [ ] (equipping about one month), there is also no leak of air, and it has ridden.Considering the thing of the Puncture, it
--Does and there is no loss.
View detail
Fits: APRILIA SXV450, APRILIA SXV550, DUCATI sports classic, DUCATI Pole Smart, KTM , Norton command, SUZUKI , SUZUKI DR-Z400SM, TRIUMPH Thruxton R, YAMAHA TW200, YAMAHA TW225, その他 , その他 , その他 , その他
[Webike Monitor] Although there is [ a rumor that it is serious ] attachment, surely or is not found very much.merely -- never -- very much -- = -- difficult -- coming out -- I think that there is nothing.A Handling becomes light and Puncture repair a
[Webike Monitor] Although there is [ a rumor that it is serious ]
attachment, surely or is not found very much.merely -- never -- very much -- = -- difficult -- coming out -- I think that there is nothing.A Handling becomes light and Puncture repair also becomes easy, and if interested, even if it will do, I think that it is good.
View detail
Fits: APRILIA SXV450, APRILIA SXV550, DUCATI sports classic, DUCATI Pole Smart, KTM , Norton command, SUZUKI , SUZUKI DR-Z400SM, TRIUMPH Thruxton R, YAMAHA TW200, YAMAHA TW225, その他 , その他 , その他 , その他
He thought that he would make it a Tube reply in accordance with the rear wheel having blown out, and it purchased. First, although I who think whether to make a mistake if an amateur also does as a description carefully although construction is fairly t
He thought that he would make it a Tube reply in accordance with the rear wheel having blown out, and it purchased.
First, although I who think whether to make a mistake if an amateur also does as a description carefully although construction is fairly troublesome have done fairly suitably, even if it passes half a year, there is no air leakage.
Although purchased by an order Set, since a front wheel is troublesome, it has been neglected to a Tire exchange opportunity.
I also regard that Puncture repair becomes easy on the way as a Merit being large.
View detail
Fits: APRILIA SXV450, APRILIA SXV550, DUCATI sports classic, DUCATI Pole Smart, KTM , Norton command, SUZUKI , SUZUKI DR-Z400SM, TRIUMPH Thruxton R, YAMAHA TW200, YAMAHA TW225, その他 , その他 , その他 , その他
It constructed to around 17 inches of excel rims. Although it is not easy, also difficultly, there is nothing. I often read a description and think that it will be satisfactorily done if it is a direction which work can improve perseverance carefu
It constructed to around 17 inches of excel rims.
Although it is not easy, also difficultly, there is nothing.
I often read a description and think that it will be satisfactorily done if it is a direction which work can improve perseverance carefully.
Since air temperature was 15 邃?or more recommendation, it constructed in heat gun one hand in the interior of a room into which heating was put.
The case of the Wilkinson ginger ale appeared in 17 inch wheels exactly, and workability was very good.
moreover, although it is in a description, saying alkaline detergent, such as magic phosphorus, is used, since a bath magic clean is neutral, the direction which will work from now on is changed in between -- since a manufacturer, Mr. Outex, answered to the question mail of the from here kindly so that there might be nothing (smile), he can feel easy.
When their eyes are turned only to a material cost, it may think that it is high, but I think that it is cheap enough with thinking including the charge of ideas, and development costs.
However, I think that there should just be a system etc. which are cheap and offer material as relief measures to the person who failed to 1 time since splendid preparedness is required 13 or 000 yen by a one-shot deal.
I was allowed to consider it as four stars based on the neighborhood.
View detail