Reviews
RIZING3 H4Hi/Lo installation and usage
Vehicle installed:SEA BASS DJEBEL250 XC
The heat sink interferes with the black plastic parts on the headlight reverse side, so it is necessary to shave it off. The wiring of the HID unit may be a little long, but it will not be a problem for installation.
The feeling is that it is very bright and the light distribution is not bad as I used to use cheap Halogen bulbs from Auto for Vehicle.
It is a good product for those who have a Grip heater or other equipment installed afterwards, as it consumes less power.
View detail
Good product
The light can reach very far in the close-up mode. The telephoto mode is not very impressive. I mainly use low beam so the product is very suitable for me. I bought a lamp with a color temperature of 4500k which gives a pretty good light. --------------------------------------------------- -------- The lighting is very far in the projection mode. The far projection mode is not very impressive. I mainly use close lights so I see the product that is right for me. I bought lights with 4500k color heat quite well. Powered by Google Translator View detail
The brightness is good, but the length is not.
Reliable 3-year warranty.
It is long and seems to be able to dissipate heat well, so there is a sense of security.
However, it cannot be installed on a vehicle with a round head and no Clearance in the back.
I tried applying it to VMAX and Headlight will not close.
I bought it to put on my XR250, so there was no room at all.
The two armpits are brighter and the center area is darker due to the cut.:Pair (for Left and Right) I think this is due to the brightness and firmness of the cut.
I have an additional Spotlight, and thanks to AssistBeam, the front is bright when in High beam.
If the vehicle has Clearance in the back, the power box can be put away, so it is Large sturdy.
If the vehicle does not have Clearance, we will Recommend the God of thunder Gu ALPHA.
View detail
Processing required for Bracket type
In the always-on VMAX, the Chinese LEDs died early, probably due to heat.
This time, I wanted to go with a domestic product for somewhat longer life, so I decided on Sphere.
God of thunder 2 was rejected due to its length.
If God of thunder gu ALPHA, I thought the length is Large sturdy and bought it.
However, the claws on the pedestal are not clear whether they are designed for the strength of the aluminum diecast or not, but there is an extra part of the pedestal, and the lock does not close due to the claws if the VMAX with Ring Type Valve BlockCap is not a Harigane Lock Type.
Since the Valve is an Aluminum Diecast body, it can be inserted by shaving it with a Leutor.
Brightness and optical axis were Large sturdy.
Clearance in the back is also included.
If you assume some processing, it is better to do a lighting test and process if Large sturdy, considering the warranty for initial defects. If you do the processing first, you will not get the warranty.
View detail
Ideal for vehicles with inspection
The LED H4 for direct current was installed using the AC-DC conversion power supply for Headlight. (4-sided irradiation type)
The optical axis did not come out and I was forced to return Halogen,
We took into account the previous reputation of the AC-compatible H4, which would have a light shaft.
HS1 of God of thunder Gu2 purchased this time. pedestal processing premise.
The base of HS1 is small and sturdy.
The optical axis was perfectly aligned. The color is LEDWhite to SunLight, so it looks a little yellowish.
Merit is Large size because the conversion power supply could be removed, which simplified the process.
View detail
Bright and white
RIZGIN2 is a fanless type LED headlight.
The bracket of the base is installed first, then the waterproof cap is installed, and then the body is inserted and attached as if it were hooked.
The controller is relatively small, and installation itself is easy.
Note that Cutline may not appear for LED Headlight depending on Lens/Reflector shape.
In the case of the MT-09, it seemed that the optical axis adjustment had to be set very low to pass inspection (depending on the chassis).
View detail
Fits: HONDA Super Cub 110 Pro, HONDA Ape 100, HONDA monkey, HONDA Zoomer X
This amount of light is reassuring.
I was so impressed with the brightness of the LED bulbs on another car that I decided to install them on my MOTRA.
Although it flickers when idling, it is bright enough to be reliable once the car is running.
The controller is a bit large and the wiring length is halfway, so it was a bit difficult to find a good installation position, but for this price, the Level is satisfactory.
View detail
Headlight replacement!
The OEM head lamps are perfectly fine, but I saw a friend's Motorcycle and thought they looked nice, so I replaced them.
I don't feel anything special in the morning or during the day, but about dusk to nighttime, it is much easier to see.
Replacement is also easy!
View detail
Used with BOLT Shoulder Bag. It seems to be Large sturdy enough for vehicle inspection.
Attached to BOLT Shoulder Bag.
Since this is a Valve only product, installation was easy.
After the replacement, I briefly checked the optical axis and found that the Large seemed to be strong, so I decided to drive it as it was.
It felt somewhat strange, so I asked for an optical axis adjustment at Shop.
My BOLT Shoulder Bag seems to have gapped a bit on the Right.
In that case, it seems that the focus is a bit wider when compared to NORMAL Halogen from Shop,
I was told that the car needs attention during the inspection.
However, I was assured that the light intensity will pass vehicle inspections without any problems, so I can use the product with confidence.
View detail
Used for DAX Headlight.
Full-wave rectification is used for DAX of DC Spec.
Before this LED Bulb, I used a slightly more expensive Sphere LED Bulb.
No difference is perceived in brightness, current consumption, etc.
This means that the cosmetics are very good.
It would be ideal for trial use.
Incidentally, the removed LED Bulb was installed in a BOLT Shoulder Bag and the optical axis was adjusted.
As a result, the light intensity, cutline, etc. were at a level sufficient to withstand vehicle inspections.
The appearance of the LED Bulb still seemed to have a reduced number of components.
The biggest difference is the weight. The feeling of holding it was totally different.
It comes with a one year warranty, so I'm sure it won't break during that time.
I expect it to last a long time.
View detail
Good visibility.
We chose 4500K because of its longer wavelength and better visibility than 6000K. The power consumption has been lowered from Halogen, and the out-of-ball warning light has remained on. We are considering the need to incorporate a warning light canceller in the future. View detail
Expect high quality and durability
The previous God of thundergu passed away after 6 years, so we replaced it with its successor, the God of thundergu II New Model.
I used Halogen bulbs until the product arrived, but they felt dark at night.
We did not consider other products because we had already confirmed that the previous God of thundergu could be installed without modification and that the optical axis would be produced.
I am a little concerned that the price of II's New Model is set much lower, but I expect it to be as durable as the previous model.
View detail
4500K but closer to White
I bought it to replace the OEMH4Halogen, but it is a ClassicCafe racer style.
Too bright for ContinentalGT650 but the color is too White.
I dare you to use 4300K for your car's fog, but if you buy it with the +200K feeling...
It means that it was White. The visibility has increased and the current consumption has decreased.
Good
Too bad the people who choose to buy 4500K are the ones who are looking for a light bulb color.
View detail
Bright and safe
I use it on a GSX1300R HAYABUSA 08 High beam.
I introduced it because of the limitations of Halogen in NORMAL.
Dramatic change in brightness when driving at night, allowing you to drive with peace of mind.
View detail
Brighter than expected. But ProjectorLamp needs attention.
I installed it while adjusting the angle of the pedestal & heat sink after carefully reading the instruction manual. The light is as bright as the low AbsoluteHID. I installed it as specified in the instruction manual, but the light is Heart type, but it illuminates where I want to see in Curve at night, so I think it is OK.
There are some points to note when installing the H9/H11:The Valve must be inserted and rotated to fix it in place. If the base and heat sink adjustment screws are not tightened, the valve will spin inside and will not be removed, and the entire light case will have to be replaced.
Well, 35W was brighter than I expected, so I can replace the low if I like using it.
View detail
Bright despite being fanless
The light axis adjustment to illuminate a wall at a distance of 5m is perfect, and I am large satisfied with the brightness that dispels the preconceived notion that fanless LEDs are dark. All the HIDs and other cluttered auxiliaries that had been used up to now were removed, and the wiring around the front area was also cleaned up. I expect the durability of this product to be large since it claims a long life. View detail
Design is very good. Just go to 、、、、
I like the design very much. However, the bracket is rubber, so it tends to peel and tear. I would recommend this product if they could fix that. View detail
I managed to do so, albeit on a tight leash.
SRLucas type7Inch also has
Headlight cover
Depending on the Wiring condition, it will not fit in space.
It is possible. I am a Classic
Because of my supremacy, I chose Halogen's warm colors.
I was also interested in the warm colors of LEDs.
But for some reason, warm colors are not available at any supply store.
It's not on display for a trial…
While the straight white and the middle are on display…
I don't want to pay this Gold amount without checking the actual stone.
I was thinking about it, but I just had the opportunity.
I installed it. if it's 3200k.
It's no match for Halogen, but Limit!
The color was warm, which was a good thing.
I use it as it is.
Is the fit honestly not too much of a strain on Wiring?
A little worried.
View detail
If you are in the mood for a trial LED, this is enough.
[How is it used?
I bought this product because the headlight of my commuting estrella is an OEM Halogen and I wanted to get a little more light when driving at night.
ESTRELLA's Headlight Bulb is a type that is stored inside the headlight, so there was a possibility that a type with a cooling fin or ballast attached separately from the Valve would be difficult to store. So we decided to use SphereLight LEDs, which can be used by simply replacing them with HalogenType Valves. There were also better grade SphereLight types, but since the original bulb was Halogen bulb, I chose SphereLight LEDs because I thought it would be more effective just by changing to LEDs and I wanted to pay more attention to the price.
Was the one you received as per Image?
As the product page says, the dimensions are almost the same as Halogen bulbs, and the installation went without problems.
Was the installation difficult?
ESTRELLA's Headlight Bulb Replacement is BoltQuantity on the Both Sides face of the Headlight.:After removing the Lens from the Headlight, disconnect the Connector from the Valve and remove the Bracket that holds the Valve in place. The LED Bulb can then be installed in the reverse order to complete the installation.
As long as you have a Phillips Screwdriver, the work can be done in about 15 minutes.
How was your experience with it?
I could feel the brightness even with the low beam, but when I switched to the waste beam, I could see farther than ever before.
I was concerned about light flickering, etc. since it was used for OEM Lens, but so far I have not noticed anything that would bother me.
[Included Parts:were they on?
LED BulbSingle Body product, so you can't find it anywhere else.
[Was there anything that disappointed you?
Considering the price, it is more than enough for now.
View detail
Easy to install
I was worried until I actually used the product because of the narrow beam coverage and flickering that I saw in the reviews of other products. However, when I tried it, my fears were put to rest. I can drive on roads with no streetlights at all with no worries. The durability of the product remains to be seen. View detail