【SPHERE LIGHT】LED Headlight RIZINGAlpha H4 Hi/Lo for Motorcycle Review
Used with BOLT Shoulder Bag. It seems to be Large sturdy enough for vehicle inspection.
Attached to BOLT Shoulder Bag.
Since this is a Valve only product, installation was easy.
After the replacement, I briefly checked the optical axis and found that the Large seemed to be strong, so I decided to drive it as it was.
It felt somewhat strange, so I asked for an optical axis adjustment at Shop.
My BOLT Shoulder Bag seems to have gapped a bit on the Right.
In that case, it seems that the focus is a bit wider when compared to NORMAL Halogen from Shop,
I was told that the car needs attention during the inspection.
However, I was assured that the light intensity will pass vehicle inspections without any problems, so I can use the product with confidence.
Responses
Other reviews
Installed on SEROW250
Replaced from SEROW OEMValve.
It is 4500k, but the color has changed from Yellow to White and it is bright enough.
The work was completed in less than 30 minutes.
I wish it were cheaper.
View detail
Easy LED conversion without modification
[How is it used?
Replacement for 35/36.5w Halogen Head Light
Was the one you received as per Image?
It was just like the picture of the product.
Was the installation difficult?
I had to replace the entire unit from a different standard headlight, so it was a bit of a hassle, but if the headlight was originally an H4, it should work just by replacing it.
How was your experience with it?
I often drive at night, especially in mountainous areas where there are few street lights, but after the replacement, I can drive with peace of mind.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I wish it had the Halogen color (3200k) that God of thundergu 2 has.
View detail
I got brightness handily!
I replaced the Headlight on my 26 year old Motorcycle, a DAX, with a Marshall 819Headlight.
It was nowhere near bright enough, and I had to be careful about leaving early in the morning as well as at night.
This time, I bought and installed this product as part of the full-wave rectification.
In one fell swoop, I had the same brightness as a modern Motorcycle.
The size is almost the same as the Marshall standard H4 Valve, so it was easy to install.
As you can see in the picture, we can also reduce the voltage consumption by using LED.
I am happy with SmallEngine Displacement Volume.
Now it's just a matter of how long it will last without failing... I just replaced it.
I'm not sure, so I'm giving Cost performance 3 stars.
If it lasts two years, five stars! I think that's it.
When I ran it on testRAN, the voltage was about 13.2v at Idling.
BatteryCHARGE after full-wave rectification was also perfect.
View detail
Great brightness! It even passed inspection!
Reason for choosing it.
The tester shop pointed out the lack of light, and Valve first … and
I bought this one which is Entry model.
I had some doubts, but I decided to go with Sphere because they have a wide range of high-end models and I thought they were highly reliable.
[Reasons for the evaluation
The brightness, texture of the product, accuracy etc. are great with no problems. I don't know about durability, so I gave it 4 stars.
[Feeling of use]
When you change the glow from Halogen, it's White! Bright! It's so bright! I chose 4500K, but it's too white for HalogenUser.
Low beam gives the impression of being far brighter than Halogen.
High beam also became brighter, but it is the feeling that the difference of High low became small because Low beam became much brighter.
I'm satisfied enough with this one, but I'm wondering what's so good and different about the High-end model that it's tens of thousands of yen….
【attachment】
The work is the same as the normal replacement of the valve, and the valve size is almost the same as the Halogen, so there is no problem in most cases.
I was worried about the compatibility with Reflector because I switched from Halogen, but I was told by the tester that the light was not scattered. the performance of LED bulb is also a factor, but it seems to be compatible with Reflector. The light quantity was also enough.
The light source is Halogen bulb and it is a little gap, so you should think that you need to adjust the optical axis. If you want to do it yourself, you can take it to a tester shop near the inspection station and they will do it for you in an instant for around 1000 yen.
[Notes]
When I changed to this Valve, the brightness did not come out at all, and High beam did not light up either. because Light became dark, I heard that LED Bulb is bright, so I thought easily, but it seems that the cause was the lack of voltage by Wiring deterioration.
The person who does DIY will Recommend the measures after identifying the cause. It's the same with any breakdown or Custom. If you do it haphazardly like me, you shop for Waste. Although it can be said that it is fun.
View detail
This is for Tuned SR!
The vibration of the SR with the Engine is horrendous, and with the Headlight from Other Brand Product, the Valve will cut out immediately.
This LED Bulb is a single piece, so it is more resistant to damage from vibration than the high-end split type.
The small screw on the tip is reattached with wet lock.
Because this Screw fell off and was damaged by vibration in about half a year though I used the same one before this.
One more point, as a countermeasure, in the case of external Headlight, it is good to fix it by wrapping it with Tie Band like the Valve fixation of Normal lens and pressing it from above.
If you only use a bracket like Gold needle, it may be damaged by vibration.
However, it is not a luminous coil like Halogen bulb, so the earthquake resistance will be higher here.
The voltage drop of 0.5V→0.1V at lighting is another good point of LED Bulb.
View detail