Reviews
Fits: SUZUKI Let's5, SUZUKI Let's5G, SUZUKI Let's4, SUZUKI LETS, SUZUKI LETS II, SUZUKI LETS II, SUZUKI LETS II, SUZUKI LETS Basket, SUZUKI STREET MAGIC, SUZUKI STREET MAGIC 110, SUZUKI STREET MAGIC 110 2, SUZUKI ADDRESS V50, SUZUKI ADDRESS V50, SUZUKI ADDRESSV125Basic, SUZUKI ADDRESS V50, SUZUKI ADDRESSV125SLIMITED, SUZUKI ADDRESSV125SS, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125 G
the best
I came up, it turns out there are two types of front pads for 100 address, check before purchasing to find out the model year View detail
For GSX1300R HAYABUSA
[How is it used?
This has become necessary along with the replacement of the Caliper on the GSX1300R HAYABUSA.
I don't need OEMCaliper, but this RADIAL CALIPER needs a color.
At first I wasn't sure of the thickness of the color, so I tried different colors.
For SEA BASSOEMFront fork, 15mm is just right, not 18mm.
Was the one you received as per Image?
Image
Compact, good quality.
The price is inexpensive for the solid quality of the product itself, and I think 6,600 yen for four is a bargain.
Four products from other Manufacturers cost more than 10,000 yen.
Was the installation difficult?
It is not difficult because it only needs to be placed between Caliper and Fork.
How was your experience with it?
Exactly.
[Included Parts:were they on?
There is none
Instruction Manual is not required, so you will know it when you see it.
[Was there anything that disappointed you?
I would like to see the compatible Size for each car model listed.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I tried various sizes, but I had to buy several sizes and try them one by one by myself because I couldn't find out what millimeter is the most appropriate on the Net. After all, 18mm is too high and 1/3 of Rotor is not pinched.
13mm is too low and Rotor will not be able to turn.
15mm fits perfectly
View detail
![Brake Pad - ROAD [LA] Compound](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0321/25641009_20221226150839140_TS.jpg)
Fits: HONDA CBR1100XXBlack Bird, HONDA CBR1100XXBlack Bird, HONDA ST1100A Pan-European, HONDA ST1100A Pan-European, HONDA ST1300 Pan-European, HONDA VFR800, HONDA VFR800, HONDA VFR800ABS, HONDA VFR800ABS, HONDA VFR, HONDA VFR, HONDA VTX1800, HONDA VTX1800, HONDA VTX1800C, HONDA VTX1800C, HONDA VTX1800R, HONDA VTX1800R, HONDA VTX1800S, HONDA VTX1800S, HONDA X11
Great Control
There were few options for Pad for Pin slide caliper for my Motorcycle, only Resin pad.
Since brembo has lineuped Sintered pad, I bought it without hesitation.
After the replacement, the new wheel is acclimated quickly, and both control and braking power are dramatically improved.
I was surprised to see how much difference just a pad can make.
I don't know about the durability yet, but I am satisfied with Large when I experience such high performance.
View detail
Fits: YAMAHA TRACER9 GT, YAMAHA FAZER8, HONDA VTR1000SP-1, HONDA CB400SF, HONDA CB400SB, HONDA CB1100EX, HONDA CB1100EX E Package, HONDA CB1100BLACK STYLE, HONDA CB1100, SUZUKI BANDIT1250, KAWASAKI VULCAN S, SUZUKI BANDIT1250 S, SUZUKI BANDIT1250 F, SUZUKI BANDIT1200, SUZUKI BANDIT1200 S, SUZUKI SV1000 S, SUZUKI V-STROM1000, SUZUKI SV1000, SUZUKI KATANA, SUZUKI GSX-S750
Kagoshima Touring for 1,600 km
Saganoseki→Aso→Takachiho→Cape Sata→Nichinan and Kyushu Touring 1600 km or so, no problem! View detail
Fits: HONDA cross-cub 110, HONDA cross-cub, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA LEAD125, HONDA LEAD125, HONDA LEAD125, HONDA Dio110, HONDA Dio110, HONDA Dio110, HONDA ZOOMER-X, HONDA LEAD110 EX, HONDA ZOOMER-X, HONDA LEAD110 EX
Easy!
It can be used for both navi110 and PCX150. It is cheap and not bad. I guess it's not so bad, but it's not that bad. View detail
Fits: BMW S1000RR, BMW S1000RR HP4, BMW S1000R
Cospar good
After 10,000 km, the Large Rotor was stepped, so it was replaced.
The price is lower than the OEM Rotor and it is the same brembo as the OEM, so I didn't hesitate to buy it.
Installation is very easy
Accuracy seems fine. Thickness is the same as NORMAL.
I guess the wear of the rear brake rotor after 10,000 km is the price to pay for the front and rear interlocking brakes.
View detail
Fits: KAWASAKI Z250, KAWASAKI Ninja250, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TZM50R, YAMAHA TZ50, TRIUMPH TIGER1050, SUZUKI BURGMAN400, SUZUKI BURGMAN400, SUZUKI BURGMAN200, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman SS, SUZUKI DR800S, KAWASAKI ELIMINATOR 125, KAWASAKI Z400, KAWASAKI Z400, KAWASAKI Z250SL
Brake Pads for Street Riding
I purchased and installed these Brake Pads for my Ninja 250SL for urban driving (commuting). The cost performance is unquestionably good, but it is still a bit expensive. "Red Pad. Compared to the OEM Brake Pads, the Brake Pads are more controllable and cost-effective, so we recommend these Brake Pads to Mainers who drive in the city. View detail
The stuff is good, but I wonder if it's expensive.
[How is it used?
Along with the replacement of the front caliper, I have also replaced the brake hose. Therefore, this one will also have to be replaced.
For OEMs, the Adapter and Hose are integrated, so if the Hose is changed, the Adapter will no longer be usable.
You could say it's an exchangeable necessity.
Was the one you received as per Image?
Active's is solid and is as per Image.
The product is small, but the packaging is well made.
good impression
Was the installation difficult?
It was a little difficult.
The Hose from ABS is one that cannot be bent made of the genus Gold, so the angles are complicated.
To remove the OEM Adapter, the Right SideSide cowl and Front Fender must be removed (not necessarily young to remove, but hard to work without them).
After that, the coolant tank on the Right Side can be removed to make the work smoother!
How was your experience with it?
Same as OEM.
It's hard to say, since it's not very visible.
Since it is to be replaced along with the replacement of the hose, it is sufficient if it functions well~.
No Fluid leaks, etc.
[Included Parts:were they on?
No, sir.
[Was there anything that disappointed you?
The construction is very good, so none.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It's a Small richer one, but at such a price it's a bit expensive.
But there is no other Brand that offers something like this except Active, so this is the only option!
New ModelGSX1300R HAYABUSA needs this one if Hose is replaced!
The length of the Hose is also listed in case you are interested.
Quantity:Pair (for Left and Right) The 360mm is just right for both of them.
View detail
be extremely thorough, focusing on even the finest of details
Tank can be oriented 360 degrees to any desired angle. View detail
STD is good too
I purchased it because the replacement cycle for the SR400's drum brake lining had arrived. Genuine products are good, but I thought there wouldn't be much difference in performance so I bought Daytona products. When changing tires, it would be a good idea to also change the lining. -------------------------------------------------- -------- I purchased it because the replacement cycle for the SR400's drum brake lining had arrived. Genuine products are good, but I thought there wouldn't be much difference in performance so I bought Daytona products. When changing tires, it would be a good idea to change the lining as well. Powered by Google Translator View detail
Easy TankStar
I have been interested in this one for a while with the installation of the Bikini cowl.
The bending process does not appear to change the tint much unless it is carefully and aggressively Tensioned.
The OEM bolt was not long enough, so we had to make do with what we had.
View detail
poor response
The MASTER of the front brake was replaced with a type without a switch, so a hydraulic switch was used.
The Stop-lamp did not light up with a light pull, and finally lit up when I gripped it a little like a hard brake.
View detail
![PREMIUM ZONE Master Cylinder Reserver Cap [NISSINΦ38]](https://img.webike-cdn.net/catalogue/images/19870/92727_T01_TS.jpg)
Fits: KAWASAKI ZZR1400, YAMAHA YZF-R1, KAWASAKI ZX-14R, KAWASAKI ZX-6R, YAMAHA YZF-R1M, Others
Quality is high.
The quality is high, but so is the price. I bought it at Webig for the Point Reduction Sale and used it for the master cylinder of the rear brake of my DAX125. I think the cost is reasonable because of the cut-outs. View detail
bremboFluid cap
Replaced because it had deteriorated and looked bad.
Screw stuck and struggled to remove.
After the replacement, it looks different.
I feel good about the ride.
View detail
The transformation with the simple addition this rear master cap is amazing
About quality and texture - The rear master cap from G-Craft is made from billet aluminum with detailed machining and a silver anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - I was unimpressed with the over look of the original rear brake master cylinder reservior tank with all it's plastic finishes. The transformation with the simple addition this rear master cap is amazing and I am more then satisfied with the new look. Products to buy together - A product to purchase to add a more attractive appearance to the Monkey 125 cockpit area would have to be a master cap for the front but sadly G-Craft do not have a matching product available but luckly Webike have other silver anodized options to choose from. Difficulty of installation - The installation of the rear master cap is a simple task that took 0.1 an hour to complete. Common sense and the use of your hands is all that is required to screw the cap onto the reservior tank. Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for and the rear master cap is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the engine cap, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
![[Yamaha Stock] Brembo Radial Brake Master Cylinder ASSY](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0289/24980842_20211228131537152_TS.jpg)
Fits: YAMAHA YZF-R7
It is a MASTER with excellent cost performance!
[How is it used?
This will be an imprementation with 100% Circuit driving.
Was the one you received as per Image?
Yes.
As shown in the photo, it arrives in a box in Assembly condition.
Was the installation difficult?
If you are able to bleed the air out of the Brake, it is an easy category.
For workability, pull out the Fluid from the Reserver tank to the banjo bolt of the MASTER.
Next, remove the banjo bolt from the OEMMASTER, and then remove and install the MASTERBody in the reverse order.
How was your experience with it?
This time, we replaced the OEM Nisshin Radial master from YZF-R1M, and the fee rings are excellent.
The piston diameter is the same (16mm), but the lever ratio is different, making it slightly stroker. This is very effective in circuit driving, and the BrakeRelease side has a lot of Strokes, which makes control easier. I think it is better than RCSMASTER of brembo. The R7OEMMASTER is 16mm, so it is theoretically more on the Stroke side. The closest thing to a replacement Brembo master is the Racing master 16x18, but since you can get one for about half the price, this master is a very cost-effective option. Moreover, since the banjo is not located on the bottom as usual but on the side, it is highly possible to use the OEM hose. In fact, again, the Banjo bolt and Hose use the OEM as is. However, one thing to note is that brembo usually has a bolt pitch of 1.00mm, but this one has a bolt pitch of 1.25mm. Therefore, if your car is equipped with the OEM Brembo master, the pitch may not match.
[Included Parts:were they on?
There is no particular Included Parts:as it arrives in Assembly condition.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Two separate banjo bolt Gaskets are required for installation.
Others are basically Bolt On. The hose from the reservoir tank to the MASTER is a transplant from the OEM Nisshin MASTER, because the length and bending angle of the R7 hose are not the same. The hose here, as well as the banjo bolt pitch, has a different diameter nipple than a normal brembo.
Finally, if you are riding a YZF-R1/M and suffering from the OEM patched fee rings, I highly recommend this MASTER. It is the most cost-effective solution for the smallest cost and the largest effect. In other words, Demerit is Zero.
View detail
Fits: DUCATI DESERTX, DUCATI HYPERMOTARD 1100, DUCATI HYPERMOTARD 1100S, DUCATI HYPERMOTARD 1100EVO, DUCATI DIAVEL 1260S, DUCATI HYPERMOTARD 796, DUCATI HYPERMOTARD 821, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD SP, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 950 RVE, DUCATI HYPERSTRADA 821, DUCATI HYPERSTRADA 939, DUCATI MONSTER 400, DUCATI MONSTER 620, DUCATI MONSTER 695, DUCATI MONSTER 1000, DUCATI MONSTER 696, DUCATI MONSTER 750
It's nice and casual.
It's nice and casual, the texture is okay. View detail
Fits: SUZUKI SKYWAVE 250, SUZUKI SKYWAVE 400, HONDA CB223S, SUZUKI SKYWAVE TYPE II, SUZUKI SKYWAVE TYPE I, SUZUKI SKYWAVE 250, KAWASAKI EPSILON 250, SUZUKI BURGMAN250, HONDA SPACY250 FREEWAY, HONDA XLR250R, HONDA FTR250, HONDA FTR223D, HONDA LEAD110, HONDA FTR223, HONDA MTX200R II, HONDA SPACY125, HONDA LEAD100, HONDA LEAD50
As expected of Nisshin, the braking power is also GOOD!
LEAD110 (JF19) I tried it out for the first time. I feel that the braking force and touch are better than those of the Normal pad, and the price is cheap and cost effective. I don't know about durability in the rain yet, but Caliper is also Nisshin, so I think it might be a good match.
I think the performance is sufficient for a Small Type Scooter.
View detail
Fits: HONDA CMX/REBEL250(ABS), YAMAHA XV1700, YAMAHA XV1700, YAMAHA MT-01, YAMAHA MT-01, YAMAHA MT-01, YAMAHA MT-01, VICTORY Vision Tour, VICTORY Vegas, VICTORY Vegas Ness Signature, VICTORY Vegas Jackpot, VICTORY Vegas 8-Ball, VICTORY Vegas 8 Ball, VICTORY Ness Cross Country, VICTORY Magnum, VICTORY Kingpin, VICTORY Kingpin 8 Ball, VICTORY Judge, VICTORY Jackpot, VICTORY HighBall
The packaging is, sadly,..,
Since Impression was well received, I was excited to purchase this one for myself.
Since I had just replaced the Brake fluid myself not long ago, I also replaced the pad myself.
I have been using Copa Slip to stop squeaking and this time is no different.
The Front of SEROW250 with DAYTONA's HYPERSintered was incredibly scary at first, even on the street, so I set out for a test run with a lot of caution, but it worked there and gradually got better and the break-in period ended after 15 km.
I look forward to Fee Rings at the next and subsequent Tourings.
My only disappointment is the packaging.
Does the Vesrah factory do this kind of packaging?
It arrived in a thin, bag-like Cellophane with a base paper and pad.
Go in, or rather, you can imagine what would happen if you put something that hard and heavy into a Cellophane bag.
The bag was torn, and when I unknowingly took it out of the box, the contents fell down with a thud.
It's hard to believe, but it's true.
And I wanted them to be shipped at least GRUGRU wrapped in plastic wrap,
And if they were put in a box by Webike! I wanted to make sure that measures were taken to prevent the contents from coming out,
If the packaging is this fragile at the time of shipment from Manufacturer, I can only assume that it was torn when it arrived at Webike! I suspect that it was torn when it was delivered to Webike!
Anyway, that makes me feel bad.
There are no scratches on the product and the performance seems Large sturdy.
I would have given it 5 Stars if it ran to some degree and I was satisfied with the Fee Ring, but I gave it 3 Stars due to packaging issues.
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA
Moriwaki master cylinder cap
I ordered these caps as an upgrade and to add a bit of style, my caps were as ever packaged and boxed to the highest standard,with only four screws holding these on both were fitted within minutes an easy upgrade for your cb13 View detail