Reviews
Satisfied with functionality and appearance
I think it's a good costumer
It may be the cheapest Stand Hook with Slider function.
View detail
It's really just a dress-up.
As Title
When I get on it, it's the first range I see when I look at Meter or something.
It is a Recommendation for Carbon lovers.
I'm not sure about the installation, as I left it to the store for inspection Timing,
BOLDOR 2009.
View detail
Exactly
No processing and It is easy to install...BALIetc. was not at all. View detail
It's somewhat within sight.
It would be nice to change the look for those who have been on it for a long time.
I left the installation to the store.
It's an easy dress-up.
Is this what the price is? I think so.
2009 BOLDOR.
View detail
RearTank Guard for cbr1000rr but can also be used for cbr600rr!
This is my first purchase of a~tech products and I think the quality is good.
I had removed the tandem footpeg and installed a single seat cowl, but the rear brakes tank was exposed and I felt something was not right!
When I put it on, I was satisfied without complaint!
If anyone is having the same problem as I am with the exposure of the Rear brakes tank with the Tandem Footpeg removed, this is a RECOMMENDATION.
By the way, the model of cbr600rr is 2bl-pc40.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3
Higher than OEM.
[How is it used?
Circuit&Pass
Was the one you received as per Image?
Yes
Was the installation difficult?
It is essential to correct the holes.
How was your experience with it?
The behavior is conveyed better than OEM.
View detail
x-mark (used to indicate an incorrect answer in a test, etc.)
[How is it used?
The VTR1000SP-2 I purchased from an acquaintance had been converted to a single seat, and although it had a lid, it was screwed on.
Was the one you received as per Image?
It includes a pedestal, a Rivet, and a Fastener.
How was your experience with it?
It did not go on easily, as I had to remove the aluminum plate on the back, but I was able to install it. I am satisfied with the large size, as I can quickly remove the seat cover by turning it half a turn or so.
[Included Parts:were they on?
Set of Contents as per product description:Male, Washer, Female. It comes with Rivet.
[Was there anything that disappointed you?
Nothing in particular. I am very satisfied. It looks very Race ish.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
You need a Riveter and a Drill.
Hand Riveter (SK11:SK11:https://www.webike.net/sd/23113093/)
Drill (KYOCERA_RYOBI:Kyo Sera_Ryobi:https://www.webike.net/sd/24632495/)
View detail
Satisfied with high quality
Fitted on a 2022 SV650X.
Motivation
In NORMAL, the Black Radiator is bare. I have no problem with the functionality of the Radiator, but it is inevitable that insects will get caught in it or the fins will be bent by stepping stones, so I bought it because I was concerned.
Installation
The normal bolt seems to be coated with screw lock material and is tight. The product dimensions are perfect, but it would be better to tighten the screws temporarily and align them carefully to ensure a good finish.
【Impressions】
I was concerned about whether it would match the pure black body, but it has no manufacturer logo, and the mesh is fine in the middle but rough on the Both Sides. Type R I chose the "Large" color, so the Both Sides are a great match in my opinion (I have rough eyes), with the Black inside standing out.
【Review】
Although it is moderately priced, it is a good product that looks good and offers good protection.
View detail
A-TECH's stable quality shines through, and in addition, you can enjoy the custom feel of the parts.
Installation is as simple as removing the plastic parts next to the radiator with two bolts and putting them back on again.
However, be careful not to lick the screw lock, which is somehow hardened even to this point.
Impact is outstanding when viewed from the front of the vehicle and at an angle.
… I thought so, but when I looked closer, I could see a glimpse of Stainless from the SIDE resin parts, which is a nice touch.
I have no complaints about the price, accuracy, and ease of installation.
If you're going to do a fair amount of high speed driving, you should have Core guard.
View detail
Increased sense of luxury
The color of the Stainless Steel matches the color of the car body, giving it a more luxurious look. View detail
Fits: KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11
I love it so much!
That's a very narrow view compared to OEMs. But it's not worth comparing them. Anyway, Cool.
By the way, the complaints are that it is hard to see compared to OEM, the price is high, and it took a long time to deliver. The complaints are that it is hard to see compared to OEMs, the price is high, and the delivery time was long.
View detail
The finish is as good as I expected.
The finish is as good as I expected. The H2 model is popular in Korea. There's a lot of interest in undercolls. I'm also using a-tech products I have placed an order. The overall packaging of the cowl is well done, and the clear layer is also good. The carbon pattern is also well expressed. It will be installed after PPF film construction. Thank you. View detail
Swing Arm Protection
It doubles as a Stand Hook and Slider.
A light fall will provide protection.
Large falls make the bosses flinch.
That's right
Because it is easy to use.
I would like to modify the mounting Bolt.
Installation is a cinch, as only Screws are required.
View detail
Good looking design!
The adhesive is strong enough and does not peel off at all! The design looks great and is applied to my NotebookPC! View detail
Carbon Kevlar stands out
From a distance, the shape is similar to the OEM Injection cover, but of course the details are slightly different. These parts have a handmade feel.
Mounting accuracy is perfect. No additional machining, etc. was required.
The glaringly glaring effect of Carbon Kevlar stands out in any case. The custom effect is also large parts for color purposes. It may be a matter of taste.
Personally, I liked the Large change.
View detail
The Parenthesis quality is further enhanced by replacing the Front and Rear Set.
[How is it used?
KSR-II Front Fender. A-TECHFront FenderSPL I wanted to install an inner rear fender after replacing the fender with an A-TECH fender, so I purchased the same A-TECH product to balance the design.
Was the one you received as per Image?
Parenthesis is good as well as Down fender for Front!
I chose Plain Weave Carbon for the Rear to match the Front, and I was so satisfied with the Large product that I drooled over its parenthesis and its image.
Was the installation difficult?
It is less difficult than the Front Fender, and can be installed by a Large-size person by referring to the included Instruction Manual for installation.
How was your experience with it?
To be honest, this is a component that was not originally included in the OEM. Parts I wouldn't be without." I think it will reduce the amount of mud and other debris that bounces off the Tire when it rains (I haven't driven in the rain, so I'm just guessing...) As I've mentioned above. Custom parts that improve the appearance of the parenthesis. It is
[Included Parts:were they on?
Rear FenderBody, Bolt and Tie Band for fixing, and Instruction Manual for installation are included.
[Was there anything that disappointed you?
None at all! It's on the back of the Fender. Black diamond I couldn't stop grinning until I took the Rear Fender out of the box, attached it to the car body, and looked at it from a bird's eye view.
Other items that would be helpful
Point and hang of installation
There is nothing difficult about it. Just follow the basic installation instructions as described in the Instruction Manual for installation and your custom is complete.
[Availability and clarity of the Instruction Manual
As mentioned above, an instruction manual for installation with illustrations is included in the package, so please read it carefully before installation.
[Notes]
There is nothing in particular, but handling with force may cause deformation or cracking, so handle with care.
[ITEMS TO BUY TOGETHER
The Parenthesis quality is enhanced to the extent that it is annoying when the Front Fender is also unified with the same material of the company.
If you can, buy the front and back Fenders at once.
[Opinions and requests to Manufacturer
Please continue to sell them as much as possible, as they are valuable custom parts for KSR-II, which has few exterior custom parts.
View detail
Just plain Cool.
[How is it used?
When I was searching for aftermarket parts on Webike to install a down fender to refresh my KSR-II that I have owned for many years, I found this product and bought it on the spur of the moment because it was on sale at Timing. I found this product at Webike when I was searching for aftermarket parts.
Was the one you received as per Image?
I purchased Plain Weave Carbon, the cheapest in the series, but it was still cool enough!
It looks like a racing machine even though it is a motorcycle used only for street riding (though it is only the owner's prejudice), so it is unbalanced against the cute KSR, but still, cool is justice.
Was the installation difficult?
The NORMAL model is an Up Fender, so to install a Down Fender, use the Attachment included with this product, but it is a bit of a puzzle, so check the illustration in the Instruction Manual before assembling it temporarily.
How was your experience with it?
I don't feel any change in functional parts in daily use. If I drive at 160km/h or more, I think I can feel the difference in straight line stability etc. from Up Fender, but I don't have such performance, so I can't experience it.
Also, Fender itself is larger than NORMAL, so no matter how lightweight the Material:There will be little to no weight difference in carbon (and it is not made of Dry carbon).
It just looks cool!
[Included Parts:were they on?
Attachment that fixes FenderBody and Down fender is Quantity:Pair (for Left and Right) 1Quantity in:Set, with accompanying Bolt for fixation included.
[Was there anything that disappointed you?
Not at all.
Luxury. Twill Weave Carbon Ya Carbon Kevlar There are higher-end products made in Japan, but they are also priced higher, so you will have to consult with your Wallet.
Other items that would be helpful
Point and hang of installation
Quantity of Attachment for Down fender:Pair (for Left and Right) It was difficult to understand the "1" in the installation instruction manual, but if you look carefully at the illustration in the instruction manual, you will be able to understand it, so I think you will have no problem installing it if you do a temporary assembly after confirming it before final fixing.
[Availability and clarity of the Instruction Manual
An illustrated Instruction Manual is included in the package, so if you are not confident, please read through it carefully before starting work.
[Notes]
If left exposed to sunlight for a long period of time, the UV rays, etc., will cause deterioration and sometimes the Clear layer on the surface will peel off (have you ever seen a vehicle with CarbonBonnet installed that has an unfortunate surface?) (Have you ever seen a vehicle with CarbonBonnet that has a disappointing surface?
When not riding, protect them from UV rays with UVCut Body cover or Garage storage, and give them moderate care.
[ITEMS TO BUY TOGETHER
If you purchase the Rear Fender with the same momentum, you may further enhance the Parenthesis quality.
[Opinions and requests to Manufacturer
This may not be the best selling product because of the vehicle, but we would appreciate continued sales whenever possible.
View detail
Good and easy installation
About quality and texture About the feeling of use Products to buy together Difficulty of installation Lett instalasjon Cost performance and comparison with other products About shipping and packaging Rask levering og godt pakket Any concerns, cautions, or advice when purchasing View detail
make a different impression
It is a shorter design than OEMFender, and just changing to this one changes the impression quite a bit.
I think it works very well with HALF COWL.
To install the bracket, you will need to use the bracket with nut that comes with the OEM Fender, or if you do not have one, you will need to prepare the nut and bolt separately.
The accuracy was slightly distorted, and the installation had to be done while stretching to fit the holes.
Although it looks good at a glance from a distance, the nature of Carbon makes it unavoidable, but resin cracks are quite noticeable, so for those who are concerned about them, FRP ones are recommended.
View detail
Beautiful ^ ^
The make-up described in the impre? Quantity in:Pair (for Left and Right) I found that the balance of the Tire was not good, but I was able to install it while looking at the clearance with the Tire. I was able to install it while watching the clearance with Tire, so it arrived at Beauty easily ^ ^.
Rubber Washer was added to prevent cracking and Button bolt was replaced.
View detail