Reviews
Fits: HUSABERG , HUSQVARNA , KTM , TRIKE , ATV_BUGGY , TRIUMPH , HONDA MONKEY, Others , SUZUKI HUSTLER, SUZUKI DJEBEL, SUZUKI RMX250, SUZUKI 250SB, KAWASAKI KLX250, KAWASAKI KDX220, KAWASAKI 250TR, HONDA XLR250, KAWASAKI KSR110, HONDA XL230, HONDA XR400 Motard, HONDA CRM250R
Handlebars are consumables! Recommendation
[How is it used?
Used on KLX250.
I chose this one because it is the cheapest one, since it will be used for Enduro race, and even if I buy an expensive handlebar, it will be bent soon anyway.
Was the one you received as per Image?
It was just like the Image in the product image.
How was your experience with it?
I haven't driven the car yet after installing it, but I like the position I feel when I straddle it.
I use it with ZETA's Handlebar raising Spacer.
Cheaper Handlebars rust easily on the Bolt part of the Handlebar Brace, so I'm hoping it won't rust!
View detail
Highly recommended! Cosy.
Used on pcx125, just remove OEMMirror and install this product! It was easy.Quantity:Pair (for Left and Right) The Blue Mirror is also very effective, and I don't get dazzled by the lights of following cars at night anymore. The angle can be adjusted in various ways, so you can choose your favorite style!
Surprisingly visible when properly adjusted. It functions normally as Mirror.
Recommended for those who want to replace it inexpensively. The appearance will change considerably.
View detail
… Well, that's just how it is!
I made a hole … or a dent in the helmet and used it. I bought it at some reYouthShop. BT8." It seems to be the successor to the
REMOTE CONTROLLER (Microphone built-in) The BT8 Microphone&REMOTE CONTROLLER extends directly from the LeftSpeaker, while the BT8 Microphone&REMOTE CONTROLLER extends across a fixture that is attached to the outside of the Microphone&REMOTE CONTROLLER. This allows the Tear off the REMOTE CONTROLLER and break it." What a thing will not happen anymore. Maybe. However, I am worried about using it on rainy days because the Microphone will be attached to the outside of the helmet. (The instruction manual says to take it off on rainy days in the first place…) Also, both the SPEAKER and REMOTE CONTROLLER are bigger.
The sound quality is … at this price, it would be foolish to expect anything more. (LOL)
Combining this with the Smartphone Holder makes Navigation very easy to use.
View detail
Fits: HONDA GROM [Grom] (MSX125)
Looks better than Slider
This is one of the Parts that I purchased to make the Grom BlackGold.
However, after I bought it, I realized that I had to remove the Tire in order to install it.
I had neither the equipment nor the experience to remove a tire from a motorcycle, so Jack from "for Vehicle" and I managed to install it by brute force.
Equipment and tools are Large things.
View detail
I got it right.
brembo GP4-RB (108mmPitch) Used in
I was nervous about ordering because I read in another review that there was only 1 pc in one product.:Set of 2pcs.
Therefore, one product is equivalent to one Caliper above.
It is not a Titaniumium coating but Titanium itself.
It is inexpensive for what it is.
Conscientious.
The bremboOEM pad pin is shaved off when the pad pin is removed and inserted, but this product is hard enough to easily enter the pad, which is good for mental health.
This type of parts usually arrives over-packaged, but this product arrives in very simple packaging.
I think this is probably an Asia import, but it is hard to say that the parts are not severe in practical dimensions, etc., and I do not see any practical problems with the product I actually received.
What I personally expect is the corrosion resistance of Titanium, which I think will be enough to satisfy me when it is Titanium.
In addition, βPin is also included.
These places are also very modest and conscientious.
(Relatively speaking) This is an inexpensive option to titaniumize Caliper's Pin.
It is not suitable for those who are Brand-oriented in every detail, but it is recommended for those who want Titanium in terms of functionality.
View detail
Fits: YAMAHA MAJESTY250 [Majesty]., YAMAHA MAJESTY250 [Majesty] (SG20J), YAMAHA MAJESTY250 [Majesty] (SG20J)
A Yamaha lover to the core!
I had been driving an mf-06 that I bought from a friend of my boss for a few years, but I decided that yamaha was the way to go.
I bought it on Dec. 21, 2009, from Mercari, and I can't ride it by myself for a while.
I decided to go with the most expensive Step Board just for the sake of it.
Difficult problems have to bend on their own, and they are mounted in one shot by trial and error.
It went surprisingly well, didn't it?
View detail
Fits: その他
I still prefer BlinkerLED.
Is it good that the current consumption has been reduced or is it slightly darker that the LEDs were replaced? View detail
Grip heater installation
Installed on ninja250 2018
I bought it with points because I had accumulated points. I didn't expect much because the price was cheaper than other products, but I think the result was more than the price.
When turned on, it heats quickly and automatically lowers the temperature as it warms up.
Late October morning I used it with summer gloves, too hot at low speed, but comfortable warmth when driving at about 50?/h.
There are only 3 temperature settings, but this is enough for me since I don't control the temperature frequently.
The Power Supply Cable of the Body is short, so it is supposed to be connected to the Cable around the Headlight, but since the DAYTONAD-UNIT was installed under the Seat at the same time, the Bullet Terminal was modified and the Cable was extended for installation.
Basically, you should be able to install it with just the parts inside the box.
Grip bond should be there because Left Side turns a little bit.
It's only been two weeks since installation, but I've had no problems with it.
View detail
It is one of the reassuring factors.
I would like to see color variations in Plain Aluminum and Black, but after a month of use, I have no complaints. I have been storing it in the Frame with the included mounting holder. View detail
brembo for new Crab
Pad pin of bremboOEM is a press-fit type and is troublesome to remove and install, so it was replaced with Titaniumium pad pin by Timing, a pad replacement company.
It looks beautiful and satisfying because it is Titanium.
View detail
Fits: TRIUMPH , SUZUKI HUSTLER, SUZUKI DJEBEL, SUZUKI RMX250, SUZUKI 250SB, KAWASAKI KLX250, KAWASAKI 250TR, KAWASAKI KDX220, KAWASAKI KSR110, HONDA MONKEY, HONDA GORILLA, HONDA FTR250, HONDA XR230, KAWASAKI D Tracker 125, KAWASAKI KSR-1, SUZUKI DR-Z50, SUZUKI DR-Z400SM, YAMAHA TT-R50E, YAMAHA TW200, YAMAHA DT230 LANZA (DT230)
Cospar good
I updated to this Handlebar because it became difficult to correct after a Circuit run and a fall.
The deciding factor was Position, but price was also important, so we chose this product.
The picture did not show a brace, but the handlebar I received had a brace securely attached.
As for rigidity, I feel that it is a bit lax, but I feel that the rigidity is within the range of Control for me, so I have no complaints at this point.
We feel that we would rather update this product, which is less expensive, than to fall over and bend a high priced, high quality Bundle bar.
View detail
Sufficient light even in Compact
[How is it used?
I purchased this for a Rear blinker.
Was the one you received as per Image?
I received the same as the picture on the Product Page.
Was the installation difficult?
Installation was easy with M8 Bolt + Nut as there is a φ8mm hole.
I prepared a separate Bracket for Blinker with Number co-tightening.
I think it will require some ingenuity depending on the type of car.
Wiring was separately prepared and installed with a 2-poleCoupler.
Wiring work such as crimping is required.
How was your experience with it?
It is a Blinker, so the brightness is Main, but it is very bright and visibility is not a problem.
Case is also Material:Aluminum for durability
[Included Parts:were they on?
No Included Parts:Bolt and terminals for installation must be prepared separately.
Also, since it is LED Light, I think Relay for LED will be necessary.
[Was there anything that disappointed you?
The Lens and Aluminum Case are separate parts.
Since the fixing is only one Small Screw, I am worried about the Screw falling due to vibration.
I removed it once, applied Screw lock agent and reassembled it.
View detail
Fits: KAWASAKI NINJA2 Helmet50RR, HONDA CB223S, HONDA CB400SF, HONDA GB250 CLUBMAN, KAWASAKI KSR-1, KAWASAKI KSR-2, KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI ZX-9R, KAWASAKI ZZR1100/ZX-11, KAWASAKI NINJA400R (-2013), SUZUKI GSX1100S KATANA (KATANA), SUZUKI GSX250S KATANA, SUZUKI GSX400S KATANA, SUZUKI GSX750 KATANA, SUZUKI GSX-R1000, SUZUKI GSX-R400, SUZUKI GSX-R600, SUZUKI GSX-R750, YAMAHA R1-Z
Purchased as a trial for Handlebar replacement
I bought it to install on my Triumph STREET TRIPLE, which I always use for touring and city riding.
To be honest, I like the position of the OEM Handlebar so much that I am currently looking for a replacement, but I am having a hard time finding one that fits the bill. This Handlebar is also quite different from the OEM position, and I'm not sure if I can use it.
I'm sorry to hear that, but I'm going to be a fertilizer for Chest.
However, it may not be very useful as an impresario since the price is so low that I felt like I was just trying it out for no good reason.
View detail
Fits: SUZUKI GSX250S KATANA [Katana]., SUZUKI GSX400S KATANA [Katana]., SUZUKI GSX250S KATANA [Katana]., SUZUKI GSX400S KATANA [Katana].
Thank you very much
The product was good, but the large size was slightly different. The position of the hole was also off by about 5mm, so we had to modify it and install it. View detail
Fits: SUZUKI GSR600, SUZUKI GSR400, YAMAHA BT1100, SUZUKI Bandit 1250, SUZUKI Bandit 1200S, SUZUKI Bandit 1200, SUZUKI RF900, SUZUKI GS1200SS, HONDA VFR750R, HONDA CB1100RS, BUELL M2 Cyclone, その他 , SUZUKI GSX-R1100, SUZUKI Inazuma 1200, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA FZR400RR, YAMAHA V-MAX1200, TRIUMPH thunderbird (North-American indigenous mythical spirit bird), TRIUMPH Trophy 900
Very Nice
Fits CB1300 pretty well, machining quality is top notch This relplaces the bulky headlight bracket and signal light holder. View detail
Fits: KAWASAKI Z400, KAWASAKI Z400, KAWASAKI Z400, KAWASAKI W650 EJ650A, KAWASAKI KZ400, KAWASAKI EX500S, KAWASAKI ESTRELLA [ESTRELLA] RS Custom BJ250A, KAWASAKI ESTRELLA Custom BJ250A, KAWASAKI ESTRELLA [Estrella] BJ250A, KAWASAKI ELIMINATOR250 [ELIMINATOR]SE EL250A, KAWASAKI ELIMINATOR250 [ELIMINATOR] V VN250A, KAWASAKI 250TR BJ250F, KAWASAKI 250TR BJ250F, KAWASAKI Z400LTD Belt Drive KZ400H 83, KAWASAKI Z250LTD Belt Drive KZ250R 83-87, KAWASAKI W650 EJ650A 05-08, KAWASAKI KZ440Sport Belt 82, KAWASAKI KZ440LTD Series 83, KAWASAKI KZ440LTD Series 80-82, KAWASAKI KZ440LTD Belt 83
Excellent braking power at a low price.
In ESTRELLA, the Front is a disc and the Rear is a drum brake.
I guess it depends on how one rides, but in my case, I often use the rear brake for cornering and speed adjustment, so the brake shoes naturally wear out faster.
I learned about these Parts from a Motorcycle shop.
good point
There is no BALI, so it can be used without any break-in process with Paper.
Durability is also on par with OEMs.
Soft BrakeTouch.
The price is reasonable.
A bad point
Rear brake shoe replacement is a little troublesome to disassemble.
Rear brake shoes are often worn out without being noticed, so this is an item to check.
View detail
Fits: HONDA MCX50, SUZUKI Sepia ZZ CA1HC, SUZUKI Address [Address] Tune CA1FB, KAWASAKI KX80 KX080V, KAWASAKI KX250, KAWASAKI KX125, KAWASAKI KSR-2 MX080B, KAWASAKI KSR-1 MX050B, KAWASAKI KS-2 KMX80, KAWASAKI KS-1 KMX50, KAWASAKI KDX125SR DX125A, KAWASAKI KD80, SUZUKI Shoot CA14B 85, SUZUKI sepia] rs ca1hb 93-95, SUZUKI MODE [Mode] GT CA18A 87, SUZUKI Mini M50 90-95, SUZUKI Mini M50 86-89, SUZUKI HI UP [HI UP] R CA1DB 88, SUZUKI GAG [GAG] LA41A 86, SUZUKI CP50 85
Cospa best
Scooter parts must be inexpensive.
I am concerned about the durability as it has not been run yet.
View detail
Fluffy!
The seat was torn by Prank, so I was looking for a way to reupholster it and found it on sale for a very cheap price, so I bought it immediately.
The appearance is as calm as OEM, so this is a recommendation for those who do not want a conspicuous Custom.
The seating is slightly softer than OEM, which may be good for those with preexisting conditions in the buttocks.
Installation requires some hang, but even beginners can do it without problems.
If you have trouble reupholstering, this is the product for you.
View detail
At Ken TEC Exhaust System
I bought a Silencer of the same manufacturer's G Type at the same time and tried both at the same time, but the sound was not so different. View detail
Fits: その他 Vehicles with 22.2 mm handles
Surprisingly Matching!
I put it on to protect my hands from the wind and stepping stones.
Surprisingly MATCH to CROSS CUB.
Fire pattern decal is … sorry, I removed it.
View detail