Please login to check coupons
Product Detail
Specification
■Grip heater with temperature control■With switch
[3-way temperature adjustable function]
■Red light (high temperature): 60 degrees
■Blue light (medium temperature): 50 degrees
■Green light (low temperature): 40 degrees
■Grip inner diameter: 22.2mm
■Input voltage: DC12V
■Output wattage: Low temperature 17W, medium temperature 25W, high temperature 35W
■Fuse included: 7.5A
■Total length of grip portion (not including end cap) (left / right): Approx. 120mm
Description
■It is a grip heater with the temperature control function of three ways.
■The cold season is a dangerous time when your hands freeze and you are slow to operate levers.
■The grip heater is recommended to ride the motorcycle safely and securely in winter!!!
■It's as warm and supportive as a hot can of coffee.
■With the built-in temperature control chip, it heats up quickly (red flashing) in the standby mode, and then automatically keeps the temperature at about 50 degrees (blue light).
■With a convenient bracket for the switch that can be used by fastening it to the mirror.
■With a fuse for safety in case of trouble.
■It is easy to install even for amateurs because you only need to replace the grips and connect the + and -.
[operating instructions]
■Press and hold the power button for about 3 seconds to enter standby mode.
■From the standby mode, press the power button briefly to switch to the blue light (normal mode).
■In normal mode, each time you press the power button briefly, it switches between blue lighting, green lighting, and red lighting, so please set it according to your preference.
■Press and hold the power button for approx. 3 seconds to turn off the light.
■The cold season is a dangerous time when your hands freeze and you are slow to operate levers.
■The grip heater is recommended to ride the motorcycle safely and securely in winter!!!
■It's as warm and supportive as a hot can of coffee.
■With the built-in temperature control chip, it heats up quickly (red flashing) in the standby mode, and then automatically keeps the temperature at about 50 degrees (blue light).
■With a convenient bracket for the switch that can be used by fastening it to the mirror.
■With a fuse for safety in case of trouble.
■It is easy to install even for amateurs because you only need to replace the grips and connect the + and -.
[operating instructions]
■Press and hold the power button for about 3 seconds to enter standby mode.
■From the standby mode, press the power button briefly to switch to the blue light (normal mode).
■In normal mode, each time you press the power button briefly, it switches between blue lighting, green lighting, and red lighting, so please set it according to your preference.
■Press and hold the power button for approx. 3 seconds to turn off the light.
Caution
*There is no warranty or instruction manual.*This product cannot be installed on battery-less vehicles or 6V vehicle.
*There may be changes in product specifications due to the manufacturer's reasons.