Reviews
Purchased for Sissy bar installation
There were no problems with quality or installation. View detail
Fits: DUCATI 899Panigale, DUCATI MONSTER 1200S, DUCATI Multistrada 1200, DUCATI Multistrada 1260, DUCATI Panigale (except 959), DUCATI PANIGALE V4, DUCATI PANIGALE V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER V4 S
Lightweight, Reflectorless
Introduced to reduce weight of the suspension and to eliminate reflectors.
It's a bit pricey, but it's Titanium, so it can't be helped. LOL!
I haven't installed it yet, but it gives the feeling of doing it to the suspension.
Reflectorless and good looking
View detail
Thank you for all your help.
I use it all the time.
Thank you again for your assistance.
Sometimes the stock is low at nearby mass retailers, etc., so Webike helps me out in such cases.
View detail
The custom feeling is sure to increase!
Last time I bought Blue and the Custom feeling is up!
In addition, this time, Gold was purchased to further enhance the custom feel!
It is very conspicuous!
View detail
Aluminum Collar
I always use Aluminum Collar.
Anodized is also solid.
View detail
Used as Spacer for Exhaust System
When I buy a used external exhaust system, it may not have the spacer or bolt I need, so I buy it when I need it. It is very helpful that there are various sizes. View detail
To M8 with M10 color
I wanted to use the Exclusive Aluminum Spacer for M10 Screw Collar from the same K-CONBrand with M8 Bolt.
These itchy parts are very helpful.
Surprisingly, there are no conversion parts like this.
View detail
Used for adjusting the width of Handlebar.
[How is it used?
The XJR1300C, which had to be inspected, was missing a handlebar width of about 10 cm, so we used four of these collars to pass the inspection.
The idea came from the Handlebar Spacer for the Z900RS from ARCHI.
Was the one you received as per Image?
It was just the right thickness, I wanted more than 22.2mm.
How was your experience with it?
Quantity:Pair (for Left and Right) To Quantity:2pc. Set by Set, and finally fixed at the Bar End of Babyface.
The inspector did not point out any particular problem, and the vehicle passed without incident with the width as stated on the inspection certificate.
View detail
Inexpensive but very effective Large
The rattle of SR400's clutch lever has become very bad, and it shakes when idling. I left it alone, but then I found out about KITACO Spacer Washer and bought it.:1pc.0.3mm thin, Quantity at top and bottom:I put in 1 pc. at a time. The rattles are gone. But you have to have enough clearance to put two pieces in. In that case, you need to use Quantity:Only 1pc. is also available. There are 0.3 and 0.5mm thicknesses and several diameters. View detail
Good usability.
We are using YAMAHA's XV750E to customize it in Cafe racer style.
We have used it several times in the past and it is easy to use.
The surface texture had changed from when I bought it about two years ago, perhaps the lot had changed.
What was smooth seems to have become a thing with faint cutting marks visible.
For general products or dress-up parts, this would be considered a decline in quality, but not for this WELD color.
In the first place, I believe that the quality has been excessive so far because of the welding premise and the painting premise with fabrics that have no surface treatment.
……, I mean, the weldability is definitely better now.
Of course, dimensions, etc., have not changed.
Since it is made according to the dimensions of the JIS standard for cap bolts, a commercially available cap bolt will fit in Beauty.
I used Chromoly's strength category 10.9Bolt because I used it for the seat rail mount, but of course it is JIS standard, so it fit in Beauty.
The thickness of each part is just right, so it did not melt off even with amateur potato welding as shown in the picture.
Personally, I would like to see M12 Lineup as well.
View detail
Ready-made Psycho
I used it on my XV750E Custom.
We have been using for M10 and others for some time.
I am currently rebuilding the Seat rail, but it is taking too long to cut out and make all the fine brackets and such.
Also, since we have to deal with limited facilities, the quality of each product is less consistent than that of a manufacturer's product.
In my case, I can only use a ball machine, Leutor, and Belt Thunder for cutting, so I cannot do beautiful perimeter machining or precision counterboring no matter how hard I try.
It is difficult to make many pieces of 50 series Aluminum alloy Gold, but it is difficult to make many pieces of Steel.
It was at this time that I found this WELD color made by MOTOR GARAGE GOODS.
Since we only have MIG welding equipment, it had to be steel, and we wanted it to look PRO, so we always wanted to do a counterbore and embed a cap bolt in it.
It is a perfect product for this application, and each size of M6, M8, and M10 can be selected. The number of pieces is also available in Single Item and Quantity.:You could choose from 1 Set of 10pcs.
Each size is in accordance with the JIS standard for cap bolts, so commercially available cap bolts will fit in Beauty.
With this spec, there is no need to fashion a taper cap bolt, etc., and a cap bolt sold in the market can be used.
I needed the strength, so I looked for and used Chromoly (SCM435) Bolt just in case.
If I may say so, I would be very happy if a lineup for M12 is added, but I wonder if there will be more now? I'm not sure if there will be more now.
The thickness of each part is just right, so even my amateur welding does not melt down, and weldability is excellent.
View detail
Fits: Others Taper Handlebar(Φ28.6) vehicle, KAWASAKI Z900RS
I like that it doesn't rust.
I bought it because I couldn't wait for months to buy HURRICANE stuff.
I bought it because it is Stainless and I thought it would not rust.
I used it on a Conti2 model and had no problems.
View detail
Fits: DUCATI 899Panigale, DUCATI MONSTER 1200S, DUCATI Multistrada 1200, DUCATI Multistrada 1260, DUCATI Panigale (except 959), DUCATI PANIGALE V4, DUCATI PANIGALE V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER V4 S
Refreshing
It is a standard item, but it is really very satisfying as a Refreshing! View detail
Quantity:It was 1 Set of 2pcs.
I should have looked closer, but the Quantity:1 Set of 2pcs. without noticing Quantity:I bought 2 Sets.
I needed the color to make Rear Sets for footpeg, so I bought it for that purpose.
View detail
No motivation, no 4mm.
Bush replacement made it thicker by an ear, so Spacer took care of it.
5mm/4.8 3mm/2.8 each, short of dimension
Quantity because it is too much trouble to shave Spacer without 4mm Lineup.:Pair (for Left and Right) Washer adjustment in non-etc.
View detail
Still a little expensive.
As you all say, a little expensive.
I'm in the mood to raise the price of Body.
It would be better to make this one cheaper.
It's a product of the year and whether you need it or not.
I know it can't be helped, but …
View detail
Anodized for fine-tuning of hand guard, rust-free
[How is it used?
We used it to fine-tune the CYCRA hand guard.
Yamaha cars are MASTER to avoid Hit because of Banjo on the outside.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
There is no problem just to pinch it.
How was your experience with it?
Since the product is Anodized, we hope it will not deteriorate.
Normal aluminum colors tend to cut-out and rust.
[Included Parts:were they on?
Color only.
[Was there anything that disappointed you?
There is also a length Lineup, which is just right because it is Anodized, but
It's a bit expensive
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
useful accessories
The K-CON anti-vibration rubber purchased by this webike is used to replace the aging and cracked rubber pad on my motorcycle. I found it on webike after searching for a long time. The specification and size are clearly described. The next thing is to hope for it Durable and won't crack quickly. -------------------------------------------------- -------- The K-CON anti-vibrating rubber purchased by this webike is used to replace the rubber pad that has been aging and cracking on my motorcycle. I found it for a long time to find it on Webike. The specifications are clearly described. Durable will not crack quickly. Powered by Google Translator View detail
Strong is up!
There's a little bit of residual vibration, but the handling is more direct! There is quite a difference before and after the change. I'm satisfied. View detail
Fits: HONDA glom, HONDA MSX125
Cospa is good
Purchased to attach to Headlight.
It is easy to install and inexpensive.
However, I thought it would have been better if the Plating was a little darker, as the Gold was a little thin.
View detail