Reviews
Fits: KAWASAKI Z650RS
Mild-mannered YOSHIMURA
Design, ◎ Best
Sound quality, a little disappointing △
Running, Torque up◎ throughout the entire area
Price, a bit high ?.
View detail
OEMExhaust System had a hole in it, so it was replaced.
I got a Yamaha VOX50 from an acquaintance and while servicing it, I found a hole in the OEM exhaust system, so I decided to replace it. I was looking for a custom exhaust system and found one that was reasonably priced and looked good, so I bought it. I was satisfied with the volume and sound quality. View detail
Length of Exhaust System determines
[How is it used?
The sound is neither too large nor too small for my liking, as it is a Japanese Government Approved Exhaust System.
Was the one you received as per Image?
Street Image
Was the installation difficult?
I asked Shop to do this.
How was your experience with it?
I like the way it looks now.
[Included Parts:were they on?
Even better if it comes with a Nut.
View detail
Best option for the Honda Monkey
This exhaust flows, sounds, and looks good while being relatively inexpensive. Quaility seems as good or better than the stock exhaust. Keeping the sock heatsheild keeps the bike looking complete IMO. The Monkey looks so charming, so I don't want to change to look to much. Shipping to continental US was reasonable in both cost and time. I only wish it came with an o2 bung pre installed and an optional spark arrestor like the Yoshi, but this exhaust is much less expensive than the full Yoshi. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Play YOSHIMURASound without complaints
I was taking a break at Large Kambo in Aso when a z900rs appeared with a sound I had never heard before and I couldn't help but call out to it.
Thank you for teaching us without being reluctant to do so.
I heard that they had waited more than half a year to get it, but I didn't think it was possible, so I checked Webig's inventory and saw that it was in stock, so I bought it immediately.
It arrived at our house the next day and I couldn't help but run out to buy Gasket.
I should have bought it at the same time when I purchased.
It had a good sound from the time it was being quenched, but after about 500Km, it sounded even better and is happily running in the cold.
View detail
What about in 23MODEL?
Exhaust system has been changed in 23MODEL and O2 sensor has been shortened. 。 Moreover, since the Coupler has been replaced with 6V MONKEY/GORILLA Main Harness, the O2 Sensor from 22MODEL onward cannot be used. I forced myself to pull it out and put it on, but ClutchCover
The coupler is on the side, so there is a possibility of deformation in summer.
It would be better to purchase our own Coupler and re-wire it.
View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-S125
Pleasant exhaust sound
Product Name
YOSHIMURA YOSHIMURA Machine Bent R-77S Cyclone Carbon End EXPORT SPEC Japanese Government Certification
Item Number
110A-525-5150
Vehicles
GSX-R125 ( 2BJ-DL33B ) 2020
Number of man-hours
About 30 minutes
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
It's cheap and it's a Full Exhaust System. The rest is Brand
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Not difficult to obtain. It is troublesome to remove the exterior
How was your experience with it?
Power and appearance have been upped.
[Included Parts:were they on?
Seal, and many other things.
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA Monkey125
YOSHIMURA??
I have been using YOSHIMURA's Exhaust System for a long time. It is a well-made, high quality, and the sound is a good sound to match the engine, and it is an exhaust system that I am convinced by buying! This is just my personal opinion! View detail
More discounts ?-?-?? after you buy!
It was just the right length for NORMALSA.
The sound was larger than I had imagined.
The installation was quite severe, but I managed to get it on, so I expect it to be durable.
Sale was further changed later and it was Shock. I would like to have it returned to Gold.
View detail
Design is good!
The OEM system is very lightweight and compact compared to the OEM system, and while I like the OEM system, the design of this exhaust system, including the handling, is not too strange and fits in well with the vehicle.
Sound is a little too Large? (OEM is too quiet?)
The only reason I did not give an overall rating of 5 stars is that the delivery time took 6 months Minus one star. (I know it had to be done for various reasons)
I also put on Universal's Heat Guard in consideration of Tandem with my grandson.
View detail
![Full Exhaust System SHORT MONSTER [ShortMONSTER S2]](https://img.webike-cdn.net/catalogue/images/126410/25048988_1_TS.jpg)
Fits: HONDA SUPER CUB C125
Nostalgic bean-jam-filled wafers (Monaka) Good sound to
[How is it used?
Mainly commuting and occasional touring
Was the one you received as per Image?
Image as it is, Moriwaki Bean-jam-filled wafers (Monaka) Because it is extremely lightweight
The weight was found to be OEM 3.8 kg, Moriwaki 1.5 kg, and the difference 2.3 kg.
The weight scale was used to weigh Scale. See image].
Was the installation difficult?
I was easy, I was.
How was your experience with it?
The Torque feeling is stronger than the OEM exhaust system, and the sound has more of a heartbeat than the OEM system, and we are satisfied with the Large change in the engine's performance.
Hairline without Burnt Color (HL-Ti) Since it is a finishing touch, it is gradually becoming my burnt color. See image].
[Included Parts:were they on?
The packaging was perfect, the Included Parts:were well secured, and the corrugated ball was thick and hard enough to protect the Exhaust System.
[Was there anything that disappointed you?
As expected of Mr. Moriwaki. It was just as I expected.
Other items that would be helpful
Pay close attention to the combination of Point and hang:EX.Flange in the installation.
The Instruction Manual is clearly illustrated with detailed notes, so please read it carefully before installation.
Items that should be purchased together are Gasket
View detail
Good
I thought overseas shipping would take longer than expected, but it was delivered quickly.
I drove it for a few months after installing the muffler and there was no problem with the product.
The exhaust sound is nice. However, the finish of the muffler paint is
There are some parts that are a bit disappointing, but other than that I am satisfied with everything.
When purchasing a muffler, the outlet angle needs some processing ---------------------------------------- ------------------ I thought it would take longer than I thought overseas delivery, but it was delivered quickly I've been driving for a few months after mounting a muffler It's good . However, the finish of the muffler painting There's a little unfortunate part. I'm satisfied with it. When purchasing a muffler, you need some processing angle angle. Powered by Google Translator
View detail
Fits: HONDA CT125
Heat Guard short
In the riding position, there is no problem, but if you put your feet down while stopped, your thighs will be behind the Heat Guard.
If you don't consciously get your foot in front of the footpeg, it will touch the exhaust pipe.
An Exhaust System Bandage was wrapped behind the Heat Guard.
View detail
Fits: KAWASAKI Z650RS
I have to say, I'm a little impatient.
I am very satisfied with the product, but I thought that YOSHIMURA products are not sold at a discount, but a few days after I received the product, it was on sale at a special price of nearly 20,000 yen. How do you all feel about this? View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA CROSSCUB110
I have no complaints.
I was torn between MORIWAKI's ShortMONSTER S2 and YOSHIMURA, but I chose YOSHIMURA because I was able to buy it at a low price at Timing on sale.
I replaced the exhaust system by myself for the first time and it was very easy.
The sound is naturally louder than the OEM, but it is not noisy,
Good volume/sound quality to make people aware of Motorcycle's presence
I don't know if it is because of this Exhaust System or not, but I feel that the fuel consumption is slightly lower (-1 or 2 km) than OEM.
Maybe I'm just turning and riding more than I used to.
View detail
HOT RAPPTrailExhaust System
The volume of the Image was exactly what we were aiming for.
The sense of power when turning is not quite right.
Product texture is very good.
I wanted to try to remove the Heat Guard on the back side, so I started to loosen the SaraScrew, but the Quantity:I gave up because the head of the Hexagonal Wrench broke off and remained inside.
I am satisfied with the product.
Thank you very much
View detail
Full titanium muffler
Clearance with the Swing Arm and Rear Sets, the style is just as I expected and the sound and performance are perfect. View detail
Fits: HONDA CT125
Sound is Gentle and the best bass
I have long been considering replacing the Exhaust System after purchasing a CT125.
I like the sound of YOSHIMURA as far as I can see in various videos,
Decided on YOSHIMURA because MORIWAKI's double-layered structure seems to accumulate dirt.
I do not like Silencer shiny in YOSHIMURA,
From the two choices of Carbon or SatinFinish
Averse to buying Coating agent separately after learning that Carbon is easily degraded by heat and UV rays.
Decided on SatinFinish, which is 11,000 cheaper than Carbon.
Purchase at WeBigyahoo store during Point Redemption Festival + discount
I was worried about whether the Motorcycle Side Cover would come off easily for installation.
The nail inside didn't break, and it came off easily and saved my life.
After that, installation was completed in an hour with no problems.
The only thing I can say is that I had a hard time getting the existing Gasket and the lower Spring to stay in place.
JA65Engine surrounding code and exhaust pipe have been improved so that they do not interfere with each other and no countermeasures are required.
After the installation was completed, the engine started and I was prepared for it to be very noisy.
Amazingly quiet and heavy bass thud thud thud Gentle Idling sound
The daytime neighborhood could be warmed up without concern.
My previous NINJA400 (Muffler replacement) The exhaust sound of the stock CB400SF was considerably louder than that of the CB400SF.
However, if you pull it when driving, the CT125 may be noisy in its own way.
The power feeling is honestly the same as you can feel, which is a disappointment.
Fuel economy will be Reviewed with future runs.
View detail
Torque feeling, Exhaust System sound, great!
Installation was very easy. Please try DIY installation. View detail
For 17 years.
I bought the same Exhaust System 17 years ago at a local store and installed it myself.
I was looking for a new exhaust system for my Silencer when the weld cracked.
The sound is still the same and quite quiet.
Good looking, good price.
I also appreciate the fact that you can sell me an Exhaust System that fits my 36 year old Motorcycle (HA02), which is the same age as mine, for a long period of time.
View detail