Reviews
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Striker Rear Sets
Fitted these rear sets with ease to my bike RS SE 2022.Petfect if you don't want the more extreme,sporty positioned rear sets Instructions are obviously in Japanese but by using a bit of common sense the installation went well.Great quality and no need for any modifications.Very happy with the final result and relieved that there are no additional vibrations. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
SetteIng patiently!
I chose one that was not too tight.
Used at 30mmBack30mm Up.
The footpeg is not so much in the way when the foot is lowered.
FOOTPEG was replaced because it felt like it didn't fit well.
Brake also didn't like the feel of the tread and added Parts.
It is difficult because of the compatibility with Handlebar and Seat.
We recommend that you be patient and make adjustments.
View detail
as advertised
As claimed, the movement is Smooth and tightly because of the use of high quality Bearing.
Installation can be done normally if the OEM can be replaced.
I would like to work on my Position in Circuit driving.
It may not be an option, but I think the footpeg width is too narrow.
View detail
Fits: KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-25R
ExactlyFit、
Installation is also easy as it comes temporarily assembled and can be easily installed.:Pair (for Left and Right) Exact fit, accuracy, and dimensions are perfect for installation.
All black finish and a shade that blends in well with Fork is GOOD!
It's a rugged but chicly coming AxelSlider!
I hope it will help mitigate damage in the event of a fall.
View detail
GOOD looking
Rear tire and rear suspension had to be removed for installation.
It can be installed without any modification.
The price is high, but I think it is a satisfactory product.
View detail
Installed on a WR250R
The Knurl on the Rear Sets doesn't go all the way to the edge, so sometimes my feet slip, so I replaced them with Striker's, which do go all the way to the edge!
I can recommend it without a slip!
View detail
Fits: KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI ZZR1400 (ZX-14)
Use with ZX-14R
By changing the ZX-14R's rear tire to 190/55, the tire and chain guard (Tire cover) The Chain-only Guard was purchased because of the interference of the
I am satisfied with the Large change because the Carbon has a good texture and the system is perfectly fine.
I would like to use it for a long period of time and review its usage again.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200R, KAWASAKI ZrX1200ZrX1200 DAEG
Simple
You can hide a cheapo Tank! It can be done with no processing and just one Bolt.
Time required:5 minutes
View detail
STRIKER sticker small
When I purchased strike's water tank fairing before, the product did not come with the manufacturer's sticker. I will put the sticker on the fairing. View detail
Seat Cowl
The shape of the product is perfect.
I was disappointed that it was difficult to install. I had to pull on it so hard that it almost broke.
I'm worried about the installation after painting.
View detail
Strong Grip
I'm using it in conjunction with another manufacturer's Rear Sets Kit.
It can be fixed with M8, so it was attached without any problem.
Even if the Grip feeling is strong and shaved off, if you turn it and bring out the new part, it will be usable.
It also comes with a red collar that can be removed to create a sharper position, so you can adjust it according to your physique and height.
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI NINJA1000, KAWASAKI NINJA250, KAWASAKI NINJA400, KAWASAKI Z H2, KAWASAKI Z1000, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI ZRX1200DAEG, KAWASAKI ZX-12R, KAWASAKI ZX-14R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-9R, KAWASAKI ZZR1200, KAWASAKI ZZR1400, KAWASAKI NINJA1000SX, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S
Striker pegs
Very sturdy, extremely well made, love how the stricker logo is etched into the peg itself, very high quality black finish View detail
As spare parts
I got it as Spare parts.
I think it's useful to have it cosmetically.
View detail
Super chain cover
One of the nicest chain guards i have seen made for a zrx1200, extremely well made part, glad to have this work of art to put on my show bike View detail
Fits: Others , KAWASAKI NINJA250 R, KAWASAKI NINJA250, KAWASAKI NINJA250, KAWASAKI NINJA400, KAWASAKI Ninja ZX-25R, KAWASAKI NINJA250, KAWASAKI Ninja ZX-25R SE KRT, KAWASAKI NINJA400, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja ZX-25R SE, KAWASAKI NINJA250
Completely pull out the Axle Shaft from the car body and install it.
Replaced OEM rubber cover. The Axle Shaft needs to be completely removed from the car body and fixed to the car body again after installation. View detail
Fits: Others , KAWASAKI NINJA250 R, KAWASAKI NINJA250, KAWASAKI NINJA250, KAWASAKI NINJA400, KAWASAKI Ninja ZX-25R, KAWASAKI NINJA250, KAWASAKI Ninja ZX-25R SE KRT, KAWASAKI NINJA400, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja ZX-25R SE, KAWASAKI NINJA250
RearASKUL Department is Refreshing
It is necessary to remove the tire. The actual work is to fix the Rear tire with the Racing Stand, pull out the OEM Rear ASKUL once, install Striker's Parts, and put the Rear ASKUL back in the Quantity.:Set.
It was not necessary to completely isolate the Tire from the vehicle body.
In addition, it is necessary to pay attention not to tighten too strongly and not to loosen the tightening from day to day because the Slider itself is not the genus Gold.
View detail
Fits: HONDA CB650R, HONDA CBR1000RR, HONDA CBR650R, KAWASAKI Ninja250, KAWASAKI Ninja250SL, KAWASAKI Ninja400, Others , YAMAHA MT-09, YAMAHA MT-09TRACER, KAWASAKI Ninja ZX-25R SE, DUCATI Streetfighter V4S, DUCATI Streetfighter V4, YAMAHA XSR900, YAMAHA MT-09 SP, HONDA CBR250R, HONDA CRF250L, HONDA CBR250RR, HONDA CBR1000RR SP, HONDA CB1100 RS, KAWASAKI Ninja ZX-25R SE KRT
Beautiful with Aluminum Cut-out
I have no problem with the OEM Oil Filler Cap.
When I tried to put my foot down just before slowing down and stopping, the hem of my pants got caught in the Cap and I had a few dangerous moments.
So I looked for something with as few protrusions as possible and not too flashy and came across this.
This is probably my first time using a Striker product.
This is a beautiful cut-out of A6061 wood, which should be resistant to corrosion.
Anodized Treatment is also beautiful.
With O-ring is also a high Point.
When I actually installed it, I thought it was a little too large, but it's okay.
It also comes with a HEXWrench, but who doesn't have a 6mm HEX? I want you to make it cheaper.
View detail
Fits: KAWASAKI NINJA400 (2014-), KAWASAKI NINJA250R
It's not the Position, it's the look.
[How is it used?
I've had it installed for about a week now and have about 300 miles on it.
Was the one you received as per Image?
Yes. It is indeed a Striker and looks cool and luxurious.
Was the installation difficult?
It arrived in pieces, so I wasn't confident in my ability to put it on by myself, so I asked for help as usual.
You don't need any special tools, but since I didn't know the order of installation or where to apply the screw lock, I think it would be safer to work with someone who has installed footpegs before.
I was wondering if you can do it if you look at the Net article.
How was your experience with it?
Anyway, it looks cool.
When I put my foot down, I didn't want it to hit the footpeg, so I replaced it, but the Position is still the same, just a little lower, and it still hits my foot.
This is not suitable for those who want to change the Position to Large.
The footpeg is very slippery compared to the OEM.
[Included Parts:were they on?
It came with a Body and Instruction Manual.
[Was there anything that disappointed you?
Not particularly
Items to buy together
It is a good idea to have Screw lock agent available.
View detail
It hurts when you hold it with your bare hands.
The protrusion of the Knurl process is amazing, and the Grip is extremely Large!
Demerit reduces Boots bottom locally lol.
Material:Since it is made of aluminum, the protruding parts will wear out due to friction with the boots, but you can use it for one round by rotating it to bring out a new surface.
View detail
Fits: KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI ZZR1400 (ZX-14)
lightweight carbon guard
Very nicely made and finished chain guard for your ZX14R . Perfectly laid plain weave carbon , with excellent structural rigidity , adds a stylish presence to your Kawasaki's rear drive line . View detail