Reviews
Comfort Clutch
I bought it because I want to lighten Clutch operation
I listed the DRC UltraLight clutch and the candidates but made a good Pro taper
- The Thailand co-position was 3 mm shorter OEM ratio and the operating force was reduced
- Easy play adjustment
- OEMHand guard can be mounted with Small machining
- Mirror Holder diverted from DRC (Mounting hole into long hole)
- Clutch switch Short circuit required
Questity from 2 to 3 fingers for your own grip strength : 2 pc multiplied by OK
Stroke increased moderately and it became easy to clutch meat
Looks also good Parenthesis, ☆ 5 if you can choose Lever color, purchased Silver Lever separately and reserved the included BlackLever
View detail
Good stuff
Even at PROTAPER I tried buying the highest peak, what kind of thing is a bit expensive. 80 km by single cylinder specific vibration / The vibration which came out with about h ceased to be transmitted to the hand. Stiffness feeling, supple one is very excellent. WR is Aluminum's Frame, Thang Arm but Handlebar only Steel, I feel like completing it will be improved by replacing this.
It is really nice..
View detail
Product is wonderful without complaint - - -
For SEROW "Narita SPECIAL Knife" BY. ZETA too
I was thinking, but I wanted Clamp as Pro taper
So, at the same Manufacturer - - - Maniac
The child of Woods "Landy Hawkins (Do you know?")
I bought this MODEL with a narrow width - - -
-------------------------
MODEL : Hawkins Woods Low
width : 775 mm height : 71mm
pull : 60mm
-------------------------
Although I was writing, what I came
A : 800 *X
B : 71 * ○
C : 66
D : 211
E : 60 * ○
F : 195
And because the width was 2 cm 5 mm long
Quantity : Pair (for Left and Right) I have to cut off
Ah NaritaSPECIAL Knife was good or not ^ ^;
I do not want to write a lie (^ ^). ^)y-.. o ○
View detail
It's a bulk clamp for the Fat bar!
Similar things came out from Zeta, too
If you take it with your hand, it seems that this one seems to be light
As you see "I made it seriously!" It looks like ^ ^;
I like Design and I've attached it.
Handlebar also made by Pro taper
I am in a good mood.. Finally our SEROW
It became one person. (Lol)
View detail
Steady making
It is a reasonable amount of money, it is a solid thickness and making.
It is not as good as mame, but it seems to be a pain reliever.
It is favorite because it looks good as well.
As Pad rubs and gets hurt all the time, Quantity : 1pc. It is practical if you sell it in units - - -
View detail
Impossible is the best, but dirt stands out
The feeling of Fit when holding is the best.
Softness compacts more than vibration reduction of Pro grip.
It is a very nice item such as an edge that can seldom be torn, but the irregular gaps are dirty and very noticeable. Off The car runs dirty so it gets dirty soon.
If Gray color can be made a little dark gray, dirt is not noticeable - - - -
Even if you wash it to Polished, you can not get dirty on Grip.
View detail
I want lowdown handle and such such such such such...finally i found protaper. it is very wonderful product and quality is very good
I want lowdown handle and such such such such such...finally i found protaper. it is very wonderful product and quality is very good View detail
Handlebar exchange (Second Repeat
When I was playing with Gymkhana playing on the river bed this time I fell down and the Handlebar was bent feeling so I thought about letting Limit use until it turns slightly but I purchased it as Stock at that time this time.
I exchanged for WyndhamMODEL from OEMHandlebar last time and tried using it for several months
First of all, Position is very natural and easy to ride, running at high pace and trying to protrude Lean Out's Handlebar, etc. I tried something like Uple, but it was easier to knock down as it was easier to knock down, but as I was in tune I could just slip down and Rear Slide Started and it was dangerous if we had not figured the limits firmly (thanks to it a lot I fell down ← I'm bad lucky
When I was Willy I was up and thanks I pushed it, I pushed it up and pulled up was easy and it was good.
In the case of Slide, sit in front and TanTan pack (Two-tiered dropping and half-crash) Even Counter naturally hits but it was not cramped and easy to do.
Quantity by the time this turn : Pair (for Left and Right) Even if it rolls more than 10 times in total, I did not feel a sense of incompatibility when bent, so I wonder if it did well due to rigidity and supple characteristics as well ... and
Perhaps it was bent gradually ... wry smile
We recommend you change from OEM to outside when turning.
However, I think that it will be helpful to some extent.
View detail
Attached to KX65
PROTaper's MiniSeries is Just size on KX 65 !!
Renthal's 784 etc. Since the Center part is made narrower than the Guard, there are quite a lot of degrees of freedom of the operation system when attaching Guards
Large falling fall (JumpShort) I tried it twice, but there is no evidence of bending (Humans have broken bones) So I think that there is durability as it is
View detail
Grip end To Large things
Breakdown of Grip end in Motocross is the most common failure (?) is (Lol)
By the way, if you are torn here you will not go through the car inspection.
This Grip has a good touch of Grip, but the durability of Grip end is wonderful. It's been three months since I was wearing it now, Race 8 Heat, a bit of practice running, there were a few times toppling over, but it is still not going to be torn.
Up to now I was using Pro grip 795, but this is sometimes the end breaks with one moss, even 2-3 months somewhere ~. Well, if this Grip of PROTaper can be used through one year 's Season it will be cheaper in terms of cost, and the burden will be reduced in terms of maintenance.
After all, the price will be about three times the price of Pro grip, so it is OK to have it ... but if the Pro grip also has moss ... (Lol)
View detail
I will grip the strongest
【What made you decide the purchase?】
I fell in love with this wartsboot feeling
【How was it actually used?】
It has a double structure, it also reduces vibration, and it is better to have a place to fit in your hand
【Was it difficult to install? (Hard parts case)】
Apply Grip bond, it is power
【Please tell me the point of installation and hang (in the case of Hard parts)】
When Grip Insert a lot of Parts cleaner inside the Grip, you do not need the power of the Spruce
[Is there anything I was disappointed about?]
There is not it is the highest.
【Hope for Manufacturer - Please let me know if you have any improvement points]
There is none
【Have you compared items?】
There will
[Others] Any item
View detail
Cost performance OK
I am using it for DT 200 WR. I chose this Handlebar size check that Normal handle would be similar in shape because it got bent. You can use it as it is without discomfort without cutting the width. It looks much better than NORMAL.
We examined other Manufacturers, but the price was cheap but there was also NameValue of Pro taper, which I thought it was a good product of Cost performance.
View detail
The feeling of Grip's bokoboko is good
There are similar products in Torque 1 and Pro grip, but it is still the original Pro taper!
Progrip is low mountain, Torque 1 is a little hardened.
I like it, but I am Pro taper is the best.
Neck is expensive and there are only Closed End so it is a waste to not cut off the end when wearing a hand guard.
View detail
It is Repeater
【What made you decide the purchase?】 Required item
Once it was used, it was decided that the compatibility with Gloves and the state of grip were the best.
【How was it actually used?】 Required item
Easy to grip, slightly alleviated the shock.
However, the decrease of Block is fast..
[Is there anything I was disappointed about?] Required item
I also wanted to make an Open Type
【Hope for Manufacturer - Please let me know if there are any improvement points] Required item
Please create an Open Type.
【Have you compared items?】 Required item
There is, but it finally calmed down to this.
[Others] Any item
It's better to wire wire.
View detail
KLX125
OEMHandlebar when standing with KLX 125 was low, so about 1 than OEM. I selected this Handlebar to up about 5 cm. Regarding the installation, since the Clutch holder of KLX 125 is not a split type, use Handlebar to slip the portion of non-slip? With File etc etc etc. I did it.
Clutch Cable that I was worried about and I was able to attach it without changing too much in OEM.
View detail
Pro taper Modest MODEL
It is a change as OEMHandlebar was a bright Silver, it seemed to float there only. I wanted to attach a bar pad to the Brace section, so I dared to make SEVEN EIGHTH YZ LOWBlack of inexpensive MODEL.
Since it is raised by 19 mm with Zita's Bar rise kit, it is the difference of OEM specific height Minus 5 mm, width plus 23 mm, pull by Plus 11 mm after installation. Cable classes were intact.
The interval that I got on is somewhat wide and I get a feeling of becoming close. I'm not sure.. Lol
The difference in design side is more remarkable than that. Black got tightened. And we are creating a Custom feel like a mota car. Catch it!
Matchy Taper Bar is also Parenthesis nice, but you still like the bar pad, Normal barType is preferred.
The only complaint is that the White adhesive in the Brace section protrudes. Even if it is the cheapest MODEL, I wish a little more carefully. I was surprised to see that it was too cluttered.
View detail
Changes from KLX 250
It is my first handlebar exchange with my first off car.
In the OEM bar, Hand guard (Armor Handguardetc. ) Can not be installed, we have purchased this item of sturdy reputation?. MODEL will be HenryLEAD.
When purchasing, it may be necessary to extend the Wire in order to purchase the Mount Kit or change the height of the Handlebar. Incidentally, KLX 250 (08-15) When installing with Clutch lever, it will not enter due to unevenness.
It's about a month to use yet, but the lightening of Handling has increased. A scary scene came out somewhat when driving at high speed, but unpaved road etc etc. Ease of handling is up, we are satisfied with Large change.
View detail
The circumference of a part without a Brace and a Handle may feel it refreshed.The Print of Clamp portion is also found useful at the time of attachment.vibration was also reduced.
The circumference of a part without a Brace and a Handle may feel it refreshed.The Print of
Clamp portion is also found useful at the time of attachment.
vibration was also reduced.
View detail
Although a thing which becomes light [ the other company ] was looked for, it purchased to the trial by saying with a Bearing. Or [ that this neighborhood is good for purchasing to a trial also in price ]. A feeling of operation of the circumference of a
Although a thing which becomes light [ the other company ] was looked for, it purchased to the trial by saying with a Bearing. Or [ that this neighborhood is good for purchasing to a trial also in price ]. A feeling of operation of the circumference of a Clutch actually changes suddenly! An original manufacturer's product stops getting used to the mind care again. It is a Recommendation absolutely. View detail
The Renthal and Pro taper which make the two greatest authorities of a Handle community. Since I felt that there was more Renthal in Japan, it was dared to choose the Pro taper. It exchanged with EVO Bar CR HI from the pure Steel handle.
The Renthal and Pro taper which make the two greatest authorities of a Handle community.
Since I felt that there was more Renthal in
Japan, it was dared to choose the Pro taper.
It exchanged with EVO Bar CR HI from the pure Steel handle.
If pure, it is low and treats, and the hot Handling becomes light and becomes easy to carry out a Standing.
With the Magnesium, color also becomes individual and is very pleasing again.
View detail