Reviews
Parenthesis is good, it's been updated.
It's up-dated.
Before
The design surface looks like Rubber Print, and the rubber part deteriorates over time.
present
The design surface is made of nylon fiber. I hope the perimeter doesn't break...
Some people say it's to prevent blisters, but in my case, I just wear it because it's good for parenthesis.
It's self-satisfying, but it increases Tension.
View detail
The Grip feels good, but the Red fades.
While installing the Jita Hand Guard Mount Side Type, I also replaced the faded grips.
The grip is a soft compound that reduces vibration and provides an excellent feel.
Next time I replace it, I'll probably use Color:Black/Gray.
View detail
It is not the same as the Pad of the genus with Handle.
The quality is different from that of the Pad in the Pro taper Handlebar's Included Parts:.
The quality of the Urethane is higher on this product, and the pro taper logo is on both sides of the Urethane for a cool look.
View detail
Safety and Dress-up
Bought it for safety, as I've hit my Helmet on the bar a few times with failed Jump landings!
Plus, Parenthesis just got better!
View detail
You look like a Works!
Purchased because the OEM Handlebar Pad was lost due to a fall during a race. First of all, compared to the OEM Styrene foam Cushion, it seems to have a higher level of protection at the time of crash due to the excellent shock absorbing urethane material. (Haven't had a chance to try it yet, though...) As for the appearance, the flashy Pro taper Logo that gives a sense of Works is impressive, and the impression of the appearance was changed at once by this one. The appearance and the performance are wonderful. View detail
More rigid, lighter!
It's more rigid and stable!
That's what I call a Pro taper!
View detail
Sturdy, 2 cm Up!
It's so stiff, and it's 2 inches up, so standing is a breeze! View detail
All good, except delivery waiting time is too long
The items came as ordered- no issue. However, waited two weeks for them to get the order ready and shipped is relatively too slow, compared to other website. View detail
Used on Honda Grom
We had to replace the entire Handlebar area, so it was a bit of work, but not too difficult.
Taper Handlebar is thicker where it attaches to the Handlebar Post and thinner towards the end.
I replaced the OEM Handlebar with this one because I heard that it bent easily.
Used at Gymkhana. I had a couple of falls, but it didn't freak me out.
View detail
Used on Honda Grom
It wasn't difficult because I just removed the original one and installed this one.
I wanted to put a thick Handlebar on it, so I am very grateful for this kind of product.
It does not loosen after installation and is firm.
View detail
Grip power is good!
[How is it used?
It is being used for the Machine that goes out to Enduro.
Was the one you received as per Image?
It was as lumpy as the Image. It is unexpectedly soft.
Was the installation difficult?
I cut the end part because I had a hand guard on it.
It's plastic, so it was pretty hard.
How was your experience with it?
It's pretty good!
Even with the mud on it, it held up reasonably well.
View detail
The quintessential Pro taper
I bought this to make the Handlebar on my xsr900 more wide, it's strong and accurate, but the Left Side GizaGiza was in the way. View detail
สินค้าส่งเร็วคุณภาพดี สมราคา View detail
Suitable for MOTARD
In use with dTRACKER.
The height aperture width is excellent.
View detail
Good?
Cost performance is the best, quality, looks good, good purchase! View detail
I'm Race ish with Fashion!
I'm not running a Circuit or OffRoad course, so I wasn't looking for a functional effect, but the way the Cushion feels, I'm pretty sure it works!
I bought it just for the look and feel, and that one turned out to be just as Parenthesis as I hoped!
View detail
There is an error in the numerical table.
I thought I had purchased the Large size of the pull, pondering while looking at the numerical table of the product Page.
In fact, the C (pull) part was the rise and the E (sweep) was the pull.
The other diagrams in the productPage helped me to understand it correctly.
I was only looking at the numerical table and overlooked it.
I'm honestly bewildered, but it's not a bad product so I'll keep using it.
It would be great if webikeStaff could review this Review and correct any errors.
View detail
I like that it has Memory in it.
I used this for the Handlebar on my KLX230R.
I didn't have any problem with the NORMAL Handlebar, but it was a little too wide and I felt a little uncomfortable when standing, so I replaced it.
This Handlebar also had a length of 800?:Pair (for Left and Right) I cut about 1? at a time, but as expected of Pro taper, Memory was included for Cut so that I could adjust the width of Handlebar from the beginning.:Pair (for Left and Right) I'm glad that I was able to get it together and Cut it easily with
Also, the Clamp section contains Memory that is easy to adjust, so I think it's a good Part that conveys the idea that Handlebar is a Part that adjusts Position.
It has a more subtle bend than the NORMAL, and is easier to ride when standing.
View detail
All this time.
[How is it used?
I compete in the Enduro race and have a habit of clinging to the Handlebar and getting blisters on my hands easily.
This Grip is very soft and thick. This grip is very soft and thick, so it is hard to get blisters. I've been using this grip for 6 years now.
I like it because it's surprisingly hard to slip on Muddy.
Was the one you received as per Image?
It's a Repeat buy so it's as per Image.
Was the installation difficult?
Cut and peel the old Grip with Cutter to remove the adhesive.
↓
Degrease and apply reliable and proven Cemedine SUPERX.
↓
Fix with Wire after inserting
How was your experience with it?
I've tried Half waffle products and others, but I keep coming back to this one.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
It's not disappointing, but it's softer and a little less durable. But it doesn't wear out too fast.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Think carefully about what you do with the Wire you tie in Twister. Sometimes I see people who tie their hands in a direction and place that kills them.
View detail
Enduro orientation
Slightly thicker than MX Grip, but not slippery even when wet or muddy View detail