Reviews
Not worth talking about. It's too thin.
For OEMShaft O.D. 11.93~.
Kochira is 11.85mm to 11.87mm in diameter.
It rattles. Somehow, it has turned into a TaperShaft!
Left11.85 Middle11.87Right11.90mm What is this?
Also, Mt. Screw's effective length is too long.
Some Swing Arm you are using has a thin shaft.
It goes wild and leaves a Screw Mountain scar.
Why did I buy this one, lol?
View detail
No Recommendation on buying if you want to pimp
I bought it for MONKEY because I had used it for APE and didn't have such a bad impression of it.
It doesn't look bad,
When it comes time to install it, it is a rickety gubba-gubba.
First, the Pivot part. This is the most important part.
It comes with four Pivot Collars.
All four are RoseRose in length.
And the Pivot Collar is not long enough.
Shim adjustment is made to the width, though,
Even if you don't want the width to rattle.
The Pivot Collar is not long enough and the Swing Arm does not move when tightened.
This can only be solved by rebuilding the Pivot Collar itself.
Then, the Shaft is passed through the Pivot Collar,
It is rattling.
Since the shaft is OEM, the inner diameter of the Pivot Collar seems to be Large.
So even if you could adjust and tighten it well at this point
Even with the Shaft in, the Swing Arm is still Oversized, so the Swing Arm will be out of control.
(One-off color is the solution for us)
Next, WheelAxle Shaft.
While the outer diameter of M12Shaft is approximately 11.92~mm
Rear axle bore diameter is 12mm or more.
This one is also rattling… This one is… already!
I thought Chain Adjuster would be nice too,
There is no reference line on the Shaft side, so you have to mark it to know….
These two points. [Color] I need to Clear.
Dangerous while driving.
I really wanted to return it, but I opened the package ….
I mean, it's not like this is a non-returnable issue if you don't know how to put it on.
I understand a certain amount of QUALITY.
This one was kind of the worst….
Oh, and for the Drum.
The Brake Rod also requires modification.
It has to be angled a little to hit the suspension bracket.
It's something for people/experts who already have … lathes and such.
WeBig sometimes has a Sale.
I regret that I should have worked a little harder and bought GCraft's Swing Arm.
If anything, Tanaka Shokai's Swing Arm is better.
Is anyone using this as is 、、、、?
View detail
Cancellation.
I can't wait until August, so please CANCELLATE. Instead, I will buy other Swing Arm. Thank you very much for your cooperation. View detail
Rough processing
The bolt tip is poorly processed. The last time I bought a 235mm bolt it had the normal shape, but this time the 220mm bolt has a beveled surface with no finishing work done, so I'm a little worried that it might get caught in the Lock nut. 。 It was an out-of-stock item, but I'm sorry that I didn't rush the delivery date. (It was delivered much sooner than expected, but I hope the product will be reliable even if it takes longer) View detail
Appearances are fine
If there are any bumps in the road, it's not a problem Handlebar is shaken When the hook is removed, the clearance between the inner diameter of PipeGuard and the outer diameter of the hook is wide Rattling Quantity:Pair (for Left and Right) Both are wide on PipeGuard? Is the CB400T thin on the outside? I'd like to replace PipeGuard with an OEM to see if it's OK with the OEM Parts replacement, please View detail
worst case scenario
It's so bad that it ranks as the first or second worst Chinese I've ever bought
The threads are crushed in seconds, and Wiring has a torn film and bare conductors even though it's not used
Mounting the Lens is very difficult because it stops at the four springs and
If you run out of balls while driving, you can't very well change them locally
Waterproof processing (GasketRubber) There is no such thing as a target
I can't wait to see how long it lasts
View detail
![Aluminum Frame Oil Cooler with Bracket [Rubber Hose]](https://img.webike-cdn.net/catalogue/images/36162/mky-00026-SUPER_1_TS.jpg)
Fits: HONDA GORILLA 12V compatible, HONDA GORILLA 6V compatible, HONDA MONKEY 12V compatible, HONDA MONKEY 6V compatible
Included Parts : There was a Garbage named.
First of all, the inside diameter of Hose is Large, Hose is a skusca, it does not become usable, I bought a Hose of Bridgestone again (About 600 yen).
Next, the shape of Oil Outlet Port (fin) It was no good and Plug cap could not be installed.
This was also about 5000 yen when buying again.
After all, only Core and Banjo kind could be used, it became high shopping.
It is a result thought that it was good to buy only cheap Core.
View detail
Fits: HONDA MONKEY, HONDA GORILLA
I installed this kit and GM-MOTO swing arm simultaneously. It is a kit for 8 Inches. The gap between the wheel and the caliper is about 1.5mm. I was very surprised about it although they didn't touch each other.When I tried the work of air bleeding, I
I installed this kit and GM-MOTO swing arm simultaneously. It is a kit for 8 Inches. The gap between the wheel and the caliper is about 1.5mm. I was very surprised about it although they didn't touch each other.
When I tried the work of air bleeding, I had to step on the pedal further although I tried many times. I couldn't finish it completely because the stroke amount was so deep. So after I took off the master cylinder once, checked the inside and tightened each part furthermore, I did the work of air bleeding again. But the air didn't bleed completely and the situation of the pedal remained deep.
Then when I removed the calipers and checked them, some thin rubber pieces came out from the plug hole. So I cleaned up the inside of the master cylinder and brake hose carefully. Nine rubber pieces came out from the inside.
I was so surprised about that. It made me so angry and I was really shocked about the Chinese quality. After finishing the work of air bleeding and the installation, I rode on my motorcycle. This time the braking force was increased to be doubtless and the stamping margin of the brake pedal was OK, but the subtle adjustment of the braking force was not so good.
Owing to it, it took more than half day. Although the appearance is good considering the price, about the performance, I can't say anything... It might have been unlucky in my case but I cannot recommend this product as the merit is only cheap price.
View detail