Reviews
That's about it
I used it for the first time and was able to adjust it. It would have been easier if the tip was cut thinner to make it easier to get into the gap. View detail
Not for groms.
Purchased for installation of High Camshaft on Grom, but it was too short to fix. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
Fitted to a Gorilla
ive fitted this to a Honda Gorilla that is black and it ties in well, paint was in good condition and the product was exelent View detail
Direct Bolt on for chaly or dax
A nice OEM looking peice to finish off your cable management for both brake and speedo cables. and comes with bolts that fit both genuine and aftermarket guards View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA MONKEY
Fitted to a chaly
Ive fitted this to a chaly that is using a different ignition to stock and it fits well and holds everything in place will order another in the future for other bikes View detail
For Mini bike.
There are similar products, but this one is priced lower than the others, so I think it is a good cosmetic product.
I will use it with a Mini bike, but I think it will also be Large sturdy enough for other uses.
View detail
Perfect for MONKEY
The Universal Product I bought for my MONKEY at a flea market site needed to be shortened and modified, but this one fits perfectly. View detail
Used for CYGNUS6 type
Used to replace RaceBearing on CYGNUS Type 6
It seems to be strong and will last for a long time.
View detail
Used to convert 6V vehicles to Clear blinker
[How is it used?
[Color] I changed to ClearEuropean Blinker and needed Orange bulb.
How was your experience with it?
Works fine. Unlike the cheap Orange bulb, the paint was well done.
How did it compare to other products?
I'm afraid you don't have to worry about 6V Orange bulbs because there are very few options.
View detail
Fits: HONDA glom, HONDA PCX150, HONDA PCX125, HONDA LEAD125, HONDA DIO110
A simple part that helps to bypass a faulty switch
About quality and texture, I can confirm that the quality is great and that the materials used are a combination of white moulded plastic for the plug, copper spade fittings for the electrical connectors and black insulated wiring for the jumper wire. About the feeling of use, This simple part has helped to bypass my faulty side stand switch and get my Grom up and running again. Products to buy together, While working on the wiring on the bike it would be ideal to also add a USB charger to your cart for the convenience of charging your mobile phone. Difficulty of installation, I can say the fitment of the side stand switch canceller for my installation was very easy due to the open access to where this plugs into the main harness and the plug and play design where no modifications is required. Cost performance and comparison with other products, The pricing of the product is great. You receive a product made from quality materials that does away with the original part that can fail causing problems and saves weight and space, also available from Kitaco at the same price. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Used for PWK28.
Used for Chinese PWK.
It's a Jet, so there's nothing to write home about it, but it's cheap but made with precision.
I can use KEIHIN-compliant Jet for Chinese PWKs, which is very useful.
I think it is a necessity at the time of Setting.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
Good quality and sound from minimoto.
I have two of these pipes. I use them on 1969 k1 rigid framed with 108cc stroker kits. They sound good without the baffle and not too loud. Bike runs great with them. The finish and fit is very high quality. Polished nicely. Beautiful welds. View detail
cute little
It is good to have the name CT110 HUNTER CUB written in Retro. View detail
Retro feel is good.
The material of the Key Holder is soft and will not damage the keyhole.
The design is also good with a retro feel.
View detail
Thick copper
I usually buy in bulk, but I had to adjust for shipping costs.
I prefer copper to Aluminum.
It is quite thick. It may not need to be this thick.
I replace them every time, so it is easy to purchase.
View detail
Fits: Others Product ID 0311 Loncin 125cc, Product ID 0313 Loncin 125cc, Product
Oil Temperature Gauge Stick Type (CROSS CUBJA45)
It has been almost 6 months since I purchased it.
Can be used interchangeably with OEM Oil Dip Stick.
The intake and exhaust system is NORMAL, so temperature control is not necessary, but it is just right for a little custom.
In the winter, the temperature was 60°C, and the other day, when the temperature was 36°C, it was up to 100°C.
The amount of engine oil is the same as the OEM length, so the amount of oil can be controlled when changing oil.
I think it's good
View detail
Full set
Complete kit to upgrade all locks: ignition lock, helmet lock and interlock lock.
Everything fits like the original, excellent quality.
I draw your attention to the fact that the wiring will need to be redone in order for everything to fit. -------------------------------------------------- -------- The full set to update all the locks: the ignition lock, the helmet lock and lock lock. Everything is suitable as the original, of great quality. I note that the wiring will need to be redone so that everything comes up. Powered by Google Translator
View detail
Grom JC92 can't be used as it is, but I was able to get the Piston Pin out with ease.
Piston Pin Puller, very useful.
I bought it because it was listed as having a compatible Piston Pin Size of 12mm to 25mm, but I need to take a moment to pull out the 12mm Piston Pin of the Grom JC92.
The construction of the product is very good, the grips are anodized, and it is not cheap.
Four types of attachments are included for pulling out the Piston Pin, which may be used on Large Motorcycle.
In the case of the Grom JC92 Piston, the smallest attachment has an outside diameter of more than 12mm, so the attachment is caught on the Piston perimeter and does not reach the Piston Pin.
So I pulled it out by biting a Spacer with an outside diameter of less than 12mm and about 5 cm, as shown in the photo.
The Curve on the Piston contact side of the Grip section was also fit to the Piston.
The Piston ring acted as a good buffer to prevent damage to the Piston, so there was no need to protect it with Dustclothetc.
View detail
ct125
search webike
I ordered a curve keyring.
Small and cute just like the picture
It goes well with the Hunter Curve. I ordered it together.
Raincoat and Kumamon Yoshimura Backpack
I like them all, the price is good and the quality is also good
Actual photo attached
Take care and prosper
I ordered another product, but I want to get it ------------------------------------------ ---------------- Webike I ordered the curve key ring It's small and cute like a picture It goes well with Hunter Curve. I ordered together Rain and Kumamon Yoshimura Backpack Everyone likes it all. The price is good and quality is good Licent photo Please look pretty and flourish I ordered other products, but I want to get it. Powered by Google Translator
View detail
Necessary and sufficient performance
The engine side mounting screws are difficult to remove without removing the UnderBracket and other parts. Other than that, the Large is strong enough for anyone. The performance of Large and Single4Stroke engines' exhaust systems are all similar. Silencer and exhaust pipe made of steel are impossible. There, the high price by name makes me doubt the thinking of those who buy them. As I mentioned earlier, two horsepower and three horsepower are no different. It is definitely better than rusting. As for the volume, it is not noisy at Idling and is at a level that is not a problem. It is not so loud at high rpm, but I don't think it is noisy. 100km is enough with the meter reading of ct125. Fuel consumption is not much different from NORMAL. If the one you put on is worse than NORMAL, please re-educate the Right hand. View detail