Reviews
Fits: Others 50cc-750cc for each company/Pipe handle
It was a good purchase at a low price!
The delivery took about 4 days (order this gold, arrive next week) and installation is simple. But I didn't know how to fix it on the handlebar, so I put it on the handlebar... It goes well with w800 Haha First of all, I only have a screen, but I think it looks good on me. View detail
Bolt is highly universal and can be used for various purposes other than Screen.
[How is it used?
I purchased the OEMPin that holds Screen to Cowl because it was getting tired with age, but I had a few left over and decided to use them for another purpose.
Was the one you received as per Image?
The product was just as bright Blue alumite as the image in Webike's product introduction section, and the color was exactly as shown in the Image with almost no difference in color.
Was the installation difficult?
When used for Screenetc., the OEM fixed pin (Rivet?) may need to be removed depending on the car model.
It takes some time to remove the OEM parts that are not Bolt type.
Once you have finished removing it, it is easy to fix using this product.
If you simply want to use it as a 5mmSize Bolt, it is even easier to simply replace it with the part that uses the OEM 5mmSize.
How was your experience with it?
Although not much time has passed since I started using it, I have not seen any fading, which is common with anodized dyed products.
Since it is a 5mm size bolt, it is not used often except for the Screen, but since a 5mm bolt was used as part of the exterior fixing of the Little Cub, the extra bolt was used to fix it in place.
Since the material is aluminum, it is not suitable for places where high additions are applied, but it works well enough for places where the exterior is fixed.
[Included Parts:were they on?
Material:Bolt of Aluminum with 2 Washers of Nylon and Well nut Quantity:Set contains 10 pieces.
[Was there anything that disappointed you?
If you can use it as described above, you can save money because there is a surplus even if you use it for screen depending on the type of car.
Other items that would be helpful
Point and hang of installation
Unlike steel or Stainless Steel, Aluminum is a soft material. When tightening or unfastening, insert the Hexagonal Wrench firmly and work carefully.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
Bolt and Nut's Quantity in a nutshell.:It is a Set, a very straightforward product.
[Notes]
As I said above. Proper Torque Management with Proper Tools." Anodized dyes and anodized dyes will inevitably fade under ultraviolet light, so if the dyes are not to be used for a long period of time, it is advisable to cover them with a body coverretc. to cut the UV rays.
[ITEMS TO BUY TOGETHER
If you want to use it to fix the screen when replacing the screen, use a new screen; for other uses, use a new screen. . the goods that will be required for its use." at the same time, you can save on shipping costs.
[Opinions and requests to Manufacturer
Please continue to sell this product as long as possible as it is easy to use.
View detail
Replacement
I had to replace my previous Screen because it was deteriorating and my visibility was getting worse.
Good visibility and very good wind protection.
Recommended for winter and highway use.
In midsummer, it is hot with no wind, so it may be better to use Short Screen.
View detail
Quantity for Side Mirror Base:Pair (for Left and Right) The installation was tilted because of the different height of the
The Back Mirror is to be removed and this product is to be installed, but the Quantity of the Side Mirror Base:Pair (for Left and Right) The left side is about 1cm higher than the right side. I would like to find a shorter bolt and cut the Pipe to adjust it.
Also, I don't feel any wind from the front, but the wind (air) that comes around blows from my back, so my back is cold. I think I should have chosen something a little smaller. Well, it's a good thing that I don't get wet on rainy days.
View detail
Fits: HONDA SUPER CUB 50 , HONDA SUPER CUB110, HONDA SUPER CUB110
Short Visor for appearance
I saw a SUPER CUB110 with Short Visor installed in town and it looked good, so I bought it based on the reviews.
Installation is so easy that even a beginner can install it without looking at the instruction manual as long as Spanner is available. (about 30 min. working time)
However, JA59 has a Mirror position of Quantity:Pair (for Left and Right) Since it is asymmetrical, I had to be careful to straighten the Screen.
The look and feel of the installed product has changed considerably, giving it a stylish look and feel.
Since it is a Short Type, the wind naturally hits the face, but does not directly hit the body, so it also serves as a windbreak and reduces fatigue when running.
However, as a precaution when Visor is installed, if it is placed outdoors under the blazing sun in midsummer, the windshield is a convex lens, and like a magnifying glass, it may reflect sunlight and melt the area around the Meter.
After installing and running the system, I found that the Instruction Manual was very easy to understand, and even a cloth cover was included to prevent reflection and light collection.
View detail
Easy to install
It is high enough to provide good wind protection. There is a 10cm gap between the bottom edge and the meter, and I have read some reviews about the effect of wind passing through the gap, but I did not mind it that much. The bar for attaching a cell phone, etc. is also sufficient for me, as I do not plan to attach more than one item, and there is little to obstruct my field of vision. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Resonates badly above 150kmh
Wanted it for a bit of trackday work. Makes the bike unrideable. Resonates left an right. The faster you go the more movement you get. If you like your screen moving an inch left to right in increasing frequency, which causes your helmet to do the same thing than this screen is for you. 2mm is to thin. Ok below 100kmh. View detail
Very good
This wind shield is very good and high quality ! The Gixxer 250 SF is looked very cool with this wind shield ! I recommend it. View detail
Wind protection is extremely Large.
Tell me how you are using it.
Long touring
Was the one you received as per Image?
Yes
Was the installation difficult?
The instruction manual was in DL format, but it is easy to understand because it comes with pictures.
How was your experience with it?
Wind protection effect and no body fatigue
[Included Parts:were they on?
Dedicated Screw is Quantity:2pc. Set was attached to the machine, and the rest is like using the removed Screws.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: BMW R1200GS, BMW R1200GS ADV, BMW R1200GS RAL, BMW R1200GS EXC, BMW R1250GS, BMW R1250GS ADV, BMW R1250GS HP
High wind resistance
The windproof effect is high, with a larger size than OEM.
The wood is thicker and more rigid than OEM, so the chattering noise that bothered me in OEM is gone.
The top edge is at eye level. [Color] Clear? [Color] Smoke colors provide good visibility, but be careful with dark colors.
View detail
Windproof effect is moderate
I used to wear Pooch's Long Screen, but the look didn't really stick and I had to remove it.
I still wanted a little wind protection, so I bought this Short Type.
The effect is certainly there, though not as much as Long.
There may be a difference in fatigue between the two.
And in terms of design, I think it is the best among the various external screens for Z1000, and I am glad I bought it.
Installation is easy, and the ScreenBody and Bracket are well made.
If there is anyone who is not sure about this product, I would like to recommend it to them.
View detail
Fits: Others ZETA COMP Handlebar, Others ZETA CX Handlebar, Others RENTHALHandlebar, Others HondaOEM 11mm diameter Brace
Lighting speed shipping to Oregon USA
The part arrived in 3 days after shipped total time from order 5 days-Delivered !!!. Highly recommend Webike for all your after market MC parts, way better than Ebay or Amazon. I will defenetly be back. View detail
Classy Look for CB400SF
The Honda CB400SF without the meter visor was naked looking. Now with the additional meter visor installed, it produces the classy naked bike look, and it is diverting air flow to the rider's chest and above area, providing more comfort during riding. View detail
Good luck DAYTONA.
I contacted Manufacture, but they replied that they had not confirmed the compatibility with the 2023MODEL. Since I had opened the package and could not return it, I installed it and it installed without any problem. I wish they would do a little more research on their own products. I think they could have handled the situation differently. View detail
Fits: KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
R is so tight that it cracks.
As shown in the title, the R is too tight and the screw hole position does not fit.:Pair (for Left and Right) The Bolt hole in the middle cracked. I would like to return it if possible. The price is reasonable and I would like to have it exchanged or returned for gold. If you are considering purchasing this watch, you might want to bend it in the bathtub a little before installing it like a windshield.
Added on 11/01/2023
Currently checking with Customer Support and suppliers.
View detail
Good quality and cosmetics
Higher and more rectified than OEM
High-speed driving is now easier.
ScreenBody and the dedicated PlasticRivet are
It will be attached.
Remove all OEMScreen, screws, etc. for installation,
Simply attach this product by following the reverse procedure.
Only the supplied plastic Rivet is used for fixing. At a glance
It looks unreliable, but in fact it can be firmly fixed.
When assembling this product to the vehicle body, the hole position is slightly gapped.
There were some parts that needed to be repaired, but not to the extent that they require modification.
The work can be completed in 10 minutes.
● Protective Film enters the Rubber Mall at the edge of the
But if you pull off the Film as usual, you can get a good result.
Film can be peeled off without leaving the molding intact.
The instruction manual is not included in the package, so that's a no-no.
View detail
good-looking
The function is, but the look is Parenthesis better. View detail
Style and effectiveness are excellent!
I have used it in the past for C125 and CROSS CUB and was satisfied with both Style and effect. This time, I used it for JA61Cub Pro and it was pontooned without any problem. View detail
[Color] Purchased and installed Clear and it looks good.
Personal opinion, [Color] Since we chose Clear, the BaRear does not have such a strong presence and does not disturb the atmosphere of the XSR900 too much. View detail
Eliminator
I'm glad I put it on Eliminator. View detail