PAGE TOP

【DAYTONA】Blast Barrier

Product images are for illustrative purposes only and may differ from the actual product.
Price: ฿4,644
Webike Points: 46

Best Selling Products

Product detail

[Specification]

Color: Clear
Material: Polycarbonate (Thickness 3mm)
Size: 305mm (H) x 360mm (W)
[Set Contents]
Screen x 1
Sponge x 1
Double-sided Tape x 1
Countersink Cap Screws (M6 x 25mm) x 2 2pcs
Countersunk Cap Screws (M6 x 20mm) x 2pcs
U-Nuts x 4pcs
Flat Washers x 4pcs
Rosette Washers x 4pcs
Cushion Rubber (2mm thick) x 2pcs
Rubber Spacer (3D Rubber) x 2pcs

[Caution]

Installation image is for reference only.
※ The Installation brackets are sold separately.
※ CB1100 RS (SC65) 17: Part No. 61380 and 92322 are required separately.
※ Not for CB650R (RH03) as the throttle wire contacts the screen when the handlebar is turned to the left. The visor can be replaced by purchasing only the visor itself without changing the Installation bracket.
※ It will be unreasonable to install the screen after the bracket is fixed to the motorcycle. Please temporarily fasten the screen to the bracket and install it in such a way that the force escapes to each part. When tightening the screen and stay, be careful not to over-torque the screen. Over-tightening may result in damage to the screen.
* Do not use water repellents that contain solvents in their ingredients. It may cause cracking, etc.

[Description]

Blast Barrier comes in 4 colors to choose from!
As a high grade type of aero visor, we have rethought from the basics to make touring & street riding more comfortable, and created a design with a high degree of perfection that you will never get tired of. Polycarbonate (3mm thick) made in Japan is used. It is about 30 times stronger than acrylic of the same thickness, and has both high transparency and durability! Streamlined yet highly transparent, with little distortion and safety-oriented finish! The visor is 305mm x 360mm (250mm from the top edge of the headlight notch to the top edge of the visor) with a high wind protection effect. For comfortable touring and city riding! Compatible with a wide range of bikes by combining with the bracket for specific bike models sold separately!

【Example of fitment】
HONDA: CB1100 RS (SC65) 17

Reviews

  • 4.4

    41 Reviews

  • 5

    Perfect

    22

    4

    Very Good

    15

    3

    OK

    4

    2

    Poor

    0

    1

    Very Poor

    0
  • Write a review

    Simple that does not kill the merits of NAKED is good. I'm pretty lucky, so I will use my nerve to work so I will not scratch it. I need a lot of hang in combination with Bracket, it might be soft and comfortable with warm days and Dryer. Bracket is sold separately, but it is also cheaper than other companies' NAKED Shield. Although DAYTONA products are not gaudy, there is a sense of trust and I love them.

    NC 39 of CB 400 SF (spec3) Purchase after confirming with Daytona's HP that it conforms to. In terms of product number, the screen is 68303, the mounting hardware is 61380. These are all Sufoa after 1999 (spec1・2・3,vtec) And that it is compatible with. Because I do not want to change the look of Naked, the color of the screen clears. In the case where strong sunshine is reflected as seen from the front of the car body, although the presence of the screen is a little worrisome, it is transparent and does not matter if there is no reflection of light. The motive for purchasing felt that it is painful to receive wind and rain properly when traveling on a highway. Looking at the evaluation of cheap things and high price items of this product, cheap ones have few descriptions about the windshield performance, and expensive ones often mention windscreen performance, so if you buy it for windbreak use it is cheap Judge to avoid. When I tried it, I realized the windshield effect so much as the speed increases. When you hold the left hand in front while driving, you can see the boundary of the wind well. You can adjust the wind flow according to the angle of the screen, gradually make an angle, let the wind flow around the helmet. Since it dries sweat when it is a mesh jacket, it is not windy but wind pressure is lost. Although the screen is notation with 3 mm, it seems to have more thickness, and when you touch it in attaching or adjusting the angle, the making is solid and it feels durable. Although there was an explanation when cracking the bolt with a strong torque, there was an explanation, I was worried during the installation work, but there is only compatible model and forcibly bending it is not forced by 40 minutes alone by one person. When adjusting the angle, moving with moving hands with both hands slowly moves, but it was nice to move with the running wind. The bottom of the screen does not overlap the headlight, but the light reflects at the bottom. It is an advantage if you think that the light is on. Although there was a statement that it is good to paste the attached sponge on the bottom, since it does not want to present the presence of the sponge, it is used as it is. Even after installing the screen, I was able to use a bike cover of exact size without stress.

    NC 39 of CB 400 SF (spec3) Purchase after confirming with Daytona's HP that it conforms to. In terms of product number, the screen is 68303, the mounting hardware is 61380. These are all Sufoa after 1999 (spec1・2・3,vtec) And that it is compatible with. Because I do not want to change the look of Naked, the color of the screen clears. In the case where strong sunshine is reflected as seen from the front of the car body, although the presence of the screen is a little worrisome, it is transparent and does not matter if there is no reflection of light. The motive for purchasing felt that it is painful to receive wind and rain properly when traveling on a highway. Looking at the evaluation of cheap things and high price items of this product, cheap ones have few descriptions about the windshield performance, and expensive ones often mention windscreen performance, so if you buy it for windbreak use it is cheap Judge to avoid. When I tried it, I realized the windshield effect so much as the speed increases. When you hold the left hand in front while driving, you can see the boundary of the wind well. You can adjust the wind flow according to the angle of the screen, gradually make an angle, let the wind flow around the helmet. Since it dries sweat when it is a mesh jacket, it is not windy but wind pressure is lost. Although the screen is notation with 3 mm, it seems to have more thickness, and when you touch it in attaching or adjusting the angle, the making is solid and it feels durable. Although there was an explanation when cracking the bolt with a strong torque, there was an explanation, I was worried during the installation work, but there is only compatible model and forcibly bending it is not forced by 40 minutes alone by one person. When adjusting the angle, moving with moving hands with both hands slowly moves, but it was nice to move with the running wind. The bottom of the screen does not overlap the headlight, but the light reflects at the bottom. It is an advantage if you think that the light is on. Although there was a statement that it is good to paste the attached sponge on the bottom, since it does not want to present the presence of the sponge, it is used as it is. Even after installing the screen, I was able to use a bike cover of exact size without stress.

    This product is a Universal Product, but Forme which does not destroy the atmosphere of NAKED has become the deciding factor of selection.
    Screen's Size is also "Modest Large Kimono" With the feeling that it is quite effective in high speed driving.
    If it is Bikini cowl or something, the color does not match delicate colors with the car body, or somewhere interferes with other parts, but this product is offered as Exclusive Bracket model, so few such Risk I think. The price was not that high, so it was really good shopping.

    This product is a Universal Product, but Forme which does not destroy the atmosphere of NAKED has become the deciding factor of selection.
    Screen's Size is also "Modest Large Kimono" With the feeling that it is quite effective in high speed driving.
    If it is Bikini cowl or something, the color does not match delicate colors with the car body, or somewhere interferes with other parts, but this product is offered as Exclusive Bracket model, so few such Risk I think. The price was not that high, so it was really good shopping.


    【What made you decide the purchase?】 : Low price
    【How was it actually used?】 : Wind pressure per chest dramatically decreases
    【Was it difficult to install? (Hard parts case)】 : Bracket and Set so I put it on
    【Please tell me the point of installation and hang (in the case of Hard parts)】 : Since there is BALI in Bracket, it is good to curb two people or Shield for scratch prevention
    [Is there anything I was disappointed about?] : I can not adjust the angle of Shield
    【Hope for Manufacturer - Please let me know if you have any improvement points] : Since it is also optional, Spacer for more angle adjustment & more Long version
    【Have you compared items?】 : Road Comet (CHIC DESIGN)
    [Others] : Even if you drive at high speed it will not shake! (Shield is thick)

41 reviews View all

Most Viewed Products

【DOREMI COLLECTION】Type R Mole for Screen
Type R Mole for Screen DOREMI COLLECTION CB1100 RS
【DAYTONA】Aero Visor
Aero Visor DAYTONA CB125R
【DAYTONA】Blast Barrier X
Blast Barrier X DAYTONA CB1100 RS
【DAYTONA】Blast Barrier
Blast Barrier DAYTONA CB1100 RS
【DAYTONA】Aero Visor
Aero Visor DAYTONA CB125R
【CHIC DESIGN】GUYRA Shield
GUYRA Shield CHIC DESIGN CB1100 RS
【DAYTONA】Blast Barrier
Blast Barrier DAYTONA CB1100 RS
【DAYTONA】Blast Barrier X
Blast Barrier X DAYTONA CB1100 RS
【World Walk】Alternative Screen
Alternative Screen World Walk CB1100 RS
【DOREMI COLLECTION】Closeout Product]mold for type R Screen[special price].
Closeout Product]mold for type R Screen[special price]. DOREMI COLLECTION CB1100 RS