Reviews
Z2 Mirror has ….
The diameter is too narrow and it was not suitable for Z2 Mirror. View detail
MIRAX OvalBar end mirror
When the Windshield Bracket and Mirror were co-tightened, it was too complicated to remove and adjust the Mirror, so we changed to a Bar end mirror.
The Mirror itself is also smaller than the ones I have used in the past.
I like the design. Quantity at this price:Pair (for Left and Right) I appreciate the fact that it is
The supplied bolts for fixing were not suitable for ADDRESS V100, which has a narrower diameter at the throttle, so we used bolts for fixing the OEMBar End and other bolts.
View detail
Fits: SUZUKI LETS4 [LETS]., SUZUKI ADDRESS V125 [ADDRESS] CF4EA, SUZUKI ADDRESS V125 [ADDRESS] CF46A, SUZUKI LETS4 [LETS]., SUZUKI ADDRESS V125 [ADDRESS] CF4EA, SUZUKI ADDRESS V125 [ADDRESS] CF46A
easy to read
Mirror surface is large enough for a clear rearward view. View detail
The shape is beautiful and it gives off a great vibe, but…
I've had them on my CUB before.
I thought the Round Type Plating was nice and classic....:I made it Plastic.
good point
●The texture of Plating is good and the shape is beautiful, so it looks good on CUB.
It's worth polishing.
and it looks good, but...
A bad point
It is a Honda car, so Adapter is necessary.
● Visibility is not good. Gap quickly with vibration.
The vibration will cause the Mirror angle to GapGap and break. Durability is low.
Honestly, I don't do Recommendations.
Material:I think you'd be better off using Plastic or a used OEM.
It's a preference, but I think you should also consider practicality and durability.
It looks meh, though.
View detail
MIRAX102 has the same function as Napoleon's reverse thread AdapterH-10
I used something called Adapter102 from MIRAX for YAMAHA's AsianMODEL/Exciter 150.
▼OEMPattern is a
Left Side:Mirror (reverse thread) Adapter (Female with reverse thread/Male with positive thread) Body (Female with positive thread)
Right Side:Mirror(Female with straight thread)Adapter(Female with straight thread/ Male with reverse thread)Car body(Female with reverse thread
When replacing this with an external Mirror
Left Side:Mirror (Positive Thread) Spacer (Female with Positive Thread/Male with Positive Thread) Body (Female with Positive Thread)
Right Side:Mirror (Positive thread) Adapter (Female with positive thread/Male with negative thread) Body side is Female with negative thread
I bought it to make a combination of the two. It's complicated to write in letters.
[Napoleon On H-10 equivalent
MIRAX102 is the same etc. as Tanax Napoleon's reverse thread AdapterH-10.
https://www.webike.net/sd/20316827/
It is cheaper than the Tanax H-10 and functions the same. I didn't feel any problem in quality.
The mirror holes on Yamaha models have always been Right=reverse thread, Left=right thread. However, my machine (Exciter 150) has the same mirror holes as NMAX. Side is reverse thread and Right Side is forward thread.
this
Other Brand ProductMirror(Screw Diameter 10mm Quantity:Pair (for Left and Right) (both positive thread) ← important
When replacing the adapter with the one from the body side, remove the adapter from the body side and replace it with this product.:Pair (for Left and Right) Both can be positively screwed.
[Dimensions and assembly ingenuity
I was also pleased to see that the height of the bulk was only about 17mm, which was almost the same as the height of the Adapter that came with the OEM.
Since the commuter is exposed to rain, CopperGrease was applied to the male screw part to prevent sticking, and it was assembled strongly.
This is especially true on the Right Side (because the Handlebar side is reverse threaded), which may loosen from the root when the Mirror is tightened.
Others
The one with the slit in the Nut part is the Right Side (Male of the reverse thread).
I chose Black so that it would not be noticeable even if it rusted a little, but I am not sure about the rust prevention durability.
View detail
Fits: SUZUKI LETS4 [LETS]., SUZUKI ADDRESS V125 [ADDRESS] CF4EA, SUZUKI ADDRESS V125 [ADDRESS] CF46A, SUZUKI LETS4 [LETS]., SUZUKI ADDRESS V125 [ADDRESS] CF4EA, SUZUKI ADDRESS V125 [ADDRESS] CF46A
Same as the OEMMirror, same as etc... feel, cosmopolitan!
I've been unable to adjust the angle of Mirror on Left for some time now, and in addition, I fell over and I damaged the Mirror on the Right and decided to replace both Mirrors
The OEM Mirror is a 10mm reverse screw type, so I looked for it on We-Big There was Right Side, but there was no Left Side, so the Mirror conversion I thought about buying an adapter as well, but my CUB has an OEM windshield installed on it The windshield mounting hardware with an adapter for height adjustment The OEMMirror was attached, so I took it off just in case Then the bottom side was the Nut of the Normal Thread Screw, the Adapter was Opposite Thread Screw→Normal Thread Screw It was a conversion adapter Now I know that I can also use the positive Screw type
Because OEM is elliptical, I also thought about round-shaped mirror for a change of pace I was looking for an oval mirror and decided on this one at a reasonable price
I thought about buying an Adapter for height adjustment at the same time, but this product has a standard Bracket I decided not to buy the Adapter because it was longer and could be taller than the same etc
Comparing the product I received with the OEM Product, the shape of the Mirror is OEM It is almost the same as the Product
Comparing the large size of the mirrored surface, the width is the same, etc., and the height is outside the center was slightly lower and the overall size was about the same overall size
I tried to use a 14mm glasses wrench to mount it, but it was not possible to use the windshield mounting parts and the I gave up using it because it didn't fit in the gap between the Handlebar Cover Use the MONKEYSpanner to tighten the underside, then put the Mirror Bracket I tightened the Mirror side Nut while gripping and securing it
After the installation, I test drove it, but there is no rattling and it seems to be Large sturdy However, I ordered the 14mm Spanner separately because of the future
14mmSpannerQuantity for installation:We recommend that you have a 2pc
When I used it, there was no distortion in the mirrored surface [Color] It is the same as OEM Mirror with clear vision, etc
View detail
Windshield and Knuckle Visor
The Screen and Knuckle Visor of the Asahi Windshield installed on the ADDRESS110 I bought it to combine
Because the Bolt of the windshield attachment is 4cm, when you put Knuckle Visor on top of the Bolt When I was wondering what to do about it, I found this one Spacer of Spacer caught my eye
To match the height of the Bolt, the Quantity:Pair (for Left and Right) I bought two pairs in total, one at But if I did so, I might have won Screen this time, so I made it a double pair
When I put it on, it went well Exactly So it was still the right decision to buy two sets
You can find Chinese ones on Amazon and other sites for cheap, but some of them seem to be inaccurate hellip;…
This Spacer was tightly made, too
View detail
Purchase processing premise
I did not get YamahaOEMShort mirror, I made MIRAX affordable with Mirror of Standard Type Style. Mount the new item as it is and turn the expressway 80 km / When traveling in h, Right Side Mirror shook and was a backward vision Zero. Compared with OEM, Mirror Body is light weight. Bracket is thin and long. It seems he was shaking.
Perform initial work scheduled work. Shortening Bracket to the position I thought, the blurred backward view was Zero was improved, and the blur was completely eliminated. Well, in my case because it is an external MASTER, NORMAL can not be installed so I can not return it to the original, so I worked hard.
Processing is different from OEM, Bracket is thinner once, Cut in Grinder, and it is easy to just cut Screw Mountain with Tap.
View detail
Fits: SUZUKI LETS4 [LETS]., SUZUKI ADDRESS V125 [ADDRESS] CF4EA, SUZUKI ADDRESS V125 [ADDRESS] CF46A, SUZUKI LETS4 [LETS]., SUZUKI ADDRESS V125 [ADDRESS] CF4EA, SUZUKI ADDRESS V125 [ADDRESS] CF46A
GOOD for the price
It is very cheap, but the making is firm.
In some cheap Mirror the mirror surface may be distorted and the eyes may get dizzy
The mirror surface of this Mirror is very beautiful without distortion so visibility is very good.
Because the shape is also very common, I think that I will match well even if it is not Scooter.
View detail
MIRAX Mirax Big Naked Mirror for YAMAHA
I bought it because I thought that the price is cheap and looks like OEM, but it was Ha Gap. It was disappointing price! OEM (Y's Gear) It is about half as heavy as the one around the outside as compared with the product. The difference in weight is attached with ABS + Plating body The movable part is against the OEM of zinc Die-casting + Plating. Hap Gap products were all ABS + Plating and anxiety remains in strength.
The bottom is the product of Y's Gear.
View detail
Since the Mirror of the Stadium type is attached to the ClipOn, it has attached for padding of a Mirror.Although I think that a Cost performance is good in goods, I think that a product of this sort is covered over a decisive choice. -- when calling it p
Since the Mirror of the Stadium type is attached to the ClipOn, it has attached for padding of a Mirror.Although I think that a Cost performance is good in goods, I think that a product of this sort is covered over a decisive choice. -- when calling it padding of the Mirror well, it was to it, but it obtains also in texture and a Design and just called it a voice. View detail
I purchased in accordance with left-side. Although I didn't care about the appearance and decided only at the price, it is good.
I purchased in accordance with left-side. Although I didn't care about the appearance and decided only at the price, it is good. View detail
I was charmed by a low price and purchased. Although I did not expectat too much, it is not so bad. However, since it was bigger than I though, it is -1.
I was charmed by a low price and purchased. Although I did not expectat too much, it is not so bad. However, since it was bigger than I though, it is -1. View detail
It is attachment at majesty. Since he wanted to attach a mirror with short stay, purchase attachment was carried out to serve also as a spacer. Since it was cheap goods, finishing was anxious, but it was not so bad and carried out. However, th
It is attachment at majesty.
Since he wanted to attach a mirror with short stay, purchase attachment was carried out to serve also as a spacer.
Since it was cheap goods, finishing was anxious, but it was not so bad and carried out.
However, those who expect, such as mirror finish, consider that it is better to choose a higher thing.
View detail