Reviews
Genuine Akrapovic Heat Shield for RSV4 2020
This was a replacement heat shield that I needed for the RSV4 2020 that got a little damage after a small spill. The exhaust was perfectly fine but the heat shield took some scratches and looked bad. Finding the right one for this model bike was super easy as I just searched for the bike and then the brand I wanted into Webike and thisd came up. Very good on price too and slightly cheaper than could be sourced locally. I did have a couple of other small parts in this order too and shipping them all together saved on cost. My order was shipped using EMS and arrived safely in 5 days. The packages in side the box were very well padded and there were no damages to anything inside. This heat shiled is a carbon fibre one and although they are very tough, you still need to be careful not to scratch the outer coating. The heat shiedl itself is a gorgeous piece of craftsmanship and looks absolutely stunning. The weave is precise and the finsih is super glossy. The fitment was a piece of cake and went on smoothly and without a hitch. As I said, there was nothing badly damaged with the exhaust, it was literally a few scratched that would not buff out. Very happy with how this now looks and the bike is back to how it should be, pristine. Great work Webike, thank you. View detail
Fits: HUSQVARNA TE511, HUSQVARNA FE501, HUSQVARNA TC250, HUSQVARNA FE350, HUSQVARNA FC250, HUSQVARNA TC125, HUSQVARNA FE250, HUSQVARNA FS450, HUSQVARNA FC450, HUSQVARNA WR125, HUSQVARNA TE125, HUSQVARNA TE250, HUSQVARNA FE250, BETA X-Trainer 250, BETA RR2T 250, HUSQVARNA FE501, HUSQVARNA FE350, KTM BREMBO 125-530 XC-W 06-17, HUSQVARNA TE300, KTM 450 Rally
Nice upgrade
They will fit. They fit in the factory perches as good as the factory levers, and do fit behind the factory handguards with plenty of clearance. They are a well made product. Best levers I've ever owned. Crashed multiple times in hard pack, and soft conditions. They haven't even deformed. Will purchase for every dirtbike I own moving forward. View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer, YAMAHA TRACER900, YAMAHA TRACER900, YAMAHA XSR900, YAMAHA XSR900, YAMAHA XSR900
The rigidity is increased, the crotch is solid, and the comfort is increased. It is worth installing. The logistics is very fast, and the overall quality is very good.
Increased rigidity, solid crotch, increased comfort, worthy of installation, fast logistics, overall very good--------------------------------- ------------------------------- The rigidity is increased, the crotch is solid, and the comfort is increased. It is worth installing . The logistics is very fast, and the overall quality is very good. Powered by Google Translator View detail
Took a while but it’s perfect. Has the flared opening making it a true upgrade over stock. Very cool
Really nice piece. Flared mouth so it is an actual upgrade. Might add some more urethane to smooth the transition from CF to plastic insert View detail
Fits: SUZUKI Vstrom 250, SUZUKI GSR250, SUZUKI GSX250, SUZUKI GSX250R, SUZUKI GSX250, SUZUKI GSX250R
perfect product and high quality ! View detail
very well machined carburettor kit, high quality, I recommend to add an English language manual to it as only in Japanese. View detail
Fits: HONDA CR250, HONDA CR500, HONDA CR250R, HONDA CR250R, HONDA CR500R, SUZUKI RM250
ดีส่งไวพนักงานดูแลดี ไว้จะมาสั่งใหม่อีกนะครับผม ขอบพระคุณคร้าบบบบบบบบบบบบบบบบบบบบบบ View detail
![[Stock Lever] Brake Master Cylinder Kit [Horizontal Type 1/2" / Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/images/105373/61739_TS.jpg)
Fits: YAMAHA Cygnus X SR, HONDA XR50 Motard, YAMAHA XT660X, YAMAHA TZR50, YAMAHA TT250R Raid, YAMAHA RZ125, SUZUKI volty, SUZUKI cobra, SUZUKI Across, SUZUKI VX800, SUZUKI TS200R, SUZUKI TS125R, SUZUKI DR-Z400SM, SUZUKI RMX250S, SUZUKI SV400, SUZUKI GS125, SUZUKI GS125E Katana, SUZUKI RMX250, SUZUKI GSX250S Katana, SUZUKI RG200
Good product
Fits kawasaki w800 Improved the sponginess feeling Arrived well without any problem with customs Good service Highly recommended View detail
Daytona spool nut
I'm very satisfied with my order,its my first time to order daytona accessories and it fits well on my Monkey125.the item is well packed and secure.very accomodating seller..item arrived fast..surely i will order again very soon..thank you webike and godbless you more View detail
![[K TOUR] Rear Carrier](https://img.webike-cdn.net/catalogue/images/107660/80-539-11220_1_TS.jpg)
It's best
Because it is small in size, it seems difficult to lift luggage.
The quality is good and the overall balance seems good.
It creates a pretty look and looks better than when it was original.
It cannot be installed on the Ape 100 seat and fits perfectly on the Ape 50 seat.
Thank you for the fast delivery. -------------------------------------------------- -------- Because it is small in size, it seems difficult to lift luggage. The quality is good and the overall balance seems good. It creates a pretty look and looks better than when it was original. It cannot be installed on the Ape 100 seat and fits perfectly on the Ape 50 seat. Thank you for the fast delivery. Powered by Google Translator
View detail
Good looking stickers
Looks great, thick and durable, bonds good.Doesnt get scratched easily.highly recommend this. Easyl install,Cleaned surface of forks where these were to be applied and visually aligned the print applying the center as I held both ends back with one hand. Once the center made contact and I was satisfied the alignment was good I began pressing from the center up and down the full length of the decal to assure no bubbles were being trapped until one half was fully attached. Then worked from center again the other direction until it was fully wrapped around fork.Repeat on other side. View detail
The piston ring set contains what you need to freshen up this area
About quality and texture - The piston ring set from SP Takegawa is made from steel with a heat treated surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - SP Takegawa make it too easy to maintain their engine kits. The piston ring set contains what you need to freshen up this area of the engine without having to repurchase the whole engine kit previously installed. Products to buy together - A key product to purchase when freshening up the top end of the engine is a new gasket set as it is far from advised to reassemble this area with used gaskets. Difficulty of installation - The installation of the piston ring set is an advanced task that took 2 hours to complete. Mechanical aptitude and the use of assorted hand tools is what is required to disassemble this part of the engine, correctly fit to the piston and then button the engine back up. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the piston ring set is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the piston ring set, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Polisport Radiator Shroud Set for CR125R 2001
This was a set of radiator shrouds that needed replacing for wome new ones as the old ones had a lot of damage from rocks etc. I decided on the Polisport ones as I have used them a few times before and have had good experience with this brand. The radiator shrouds were pretty good value and are cheaper than some of the other alternatives out there. With a few other parts in my order, all were shipped together to save some costs. My order was delivered by EMS and took 5 days to arrive. The shrouds arrived in the Polisport packaging and were surrounded in buibble wrap to keepo them from sustaining damage in transit. The shrouds are made from a strong plastic material and are pretty robust and strong. There is a bit of flexibility so you can sit them fairly easily. I would recommend this brand for off road bike body work as they are cheap enough and last a while. The quality is really good and I found no flaws at all. Very pleased after fitting and the bike looks a lot more appealing now. Thanks Webike. View detail
Looks good. Fit nicely.
Compared to the old hose, this is much more flexible. Fitment is good, don't think there will be any issue. I can recommend this hose for replacement need. View detail
จัดส่งรวดเร็วการแพ็คสินค้ามาดีมาก สินค้ามาถูกต้อง ไม่ผิดออเดอร์ ออเดอร์อะไรไป จัดส่งได้ตามที่ต้องการ และรวดเร็วอีกต่างหาก View detail
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA Monkey Baja, HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MOTRA, HONDA MAGNA50, HONDA MAGNA50, HONDA CL50, HONDA BENLY50CD50, HONDA BENLY50CB90, HONDA BENLY90 S, HONDA BENLY50S, HONDA CUB PRESS, HONDA CUB PRESS, HONDA CUB PRESS
Genuine Kitaco Exhaust Gaskets for SUPER CUB 50
These gaskets were purchase due to needing an exhaust change on the Super Cub 50 and I do not like reusing the old ones if at all possible. These Kitaco ones were reviewed well and so I decided to give these a try myself. The price for the gaskets was excellent and far better than buying the OEM ones which essentially do the same job anyway. I have used a few Kitaco parts before and they really are great quality. I did have some other parts in an order and everything arrived in 5 days from being shipped. The gaskets arrived in the Kiataco packaging and were spot on. No issues or problems and the specs were perfect too. Very pleased with this purchase. View detail
very good product
There are various engine guard products for the Rebel 1100, but this product is the most compact and seems to cause less damage to the car body when used.
The price is reasonable too
Installation seemed simple, but it was not easy to do alone.
Still, the paint condition and finish of the product are really good.
This is a very satisfactory product. -------------------------------------------------- -------- There are various engine guard products for the Rebel 1100, but this product is the most compact and seems to cause less damage to the car body when used. The price is reasonable too Installation seemed simple, but it was not easy to do alone. Still, the paint condition and finish of the product are really good. This is a very satisfactory product. Powered by Google Translator
View detail
Genuine G-Craft Suspension Hools (stand bobbins) for Honda Monkey 125
Whilst I was ordering the clutch cover for the Monkey 125, the customer asked to order a set of these stand bobbins too so it would be easier to work on the bike. Not a problem and super easy to find. The cost is ridiculously low and for what you get for your money a cool. Witht he other parts in my order, I got them all shipped together to save some funds and were all delivered in 5 days. The stand bobbins came in the shrink wrapped packet and were well presented. These do come in 2 parts so are pretty straight forward to fit together, then it is just a case of bolting to the bike. The quality of these look awesome and do look like they will last a fair while. I did have my doubts with the small bolts but they do seem to hold up well. No issues there. Very pleased with how they fit sand how easy they are to install. Thanks Webike View detail
Fits: HUSQVARNA SVARTPILEN 401, HUSQVARNA VITPILEN 401, HUSQVARNA SVARTPILEN 200, HUSQVARNA SVARTPILEN 125, HUSQVARNA SVARTPILEN 250
The best choice for waterproof bag storage
It was useful during long distance tours.
Since the rear seat of the Svartpilen is short and narrow, this carrier can stably hold a waterproof bag of about 40 liters.
The design is simple, so it doesn't look too distracting.
Both 1st and 2nd generation fillens can be used. -------------------------------------------------- -------- It was useful during long distance tours. Since the rear seat of the Svartpilen is short and narrow, this carrier can stably hold a waterproof bag of about 40 liters. The design is simple, so it doesn't look too distracting. Both 1st and 2nd generation fillens can be used. Powered by Google Translator
View detail
It goes well with the 2018 Crosscub.
There are about 3 to 4 front carriers for crosscurves on sale, and I like them because they are just the right size and not too big.
Anything that is too heavy will affect the steering, so it is better to load a sleeping bag or light camping gear and it is convenient to tie it down.
-------------------------------------------------- -------- There are about 3 to 4 front carriers for crosscurves on sale, and I like them because they are just the right size and not too big. Anything that is too heavy will affect the steering, so it is better to load a sleeping bag or light camping gear and it is convenient to tie it down. Powered by Google Translator
View detail