Reviews
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Good Cost performance
The construction is very good, the 8inch seems to be spread out in the front and back, so I think the 10inch is probably the best fit. View detail
Fits: HONDA CUB PRESS , HONDA DREAM50, HONDA MONKEY, HONDA NS50F, HONDA APE50, HONDA CUB LITTLE CUB , HONDA GYRO UP, HONDA GYRO X, HONDA MAGNA50, HONDA APE100, HONDA CHALY, HONDA GORILLA
Different from the picture shown
The headlight bulb seemed to have run out, and when I decided to purchase the original installation, it was unexpectedly discontinued.
The shape of the item seems to be different from what I received and the picture shown on the website.
It's not that expensive, so as long as it lights up, it's not a problem.
View detail
It's cheap
I dropped my OEM side cover while driving and got flattened by the car behind me, but I'm glad I didn't cause any Damage to the car behind me.
I had a side cover from GORILLA at home, so I installed it, but the design was not right, so I bought a cover and sticker from OEM Product, which cost almost 10,000 yen, so I checked Webig and found MINIMOTO's side cover. I found MINIMOTO side cover and bought it.
When I received the package and opened it, I found that it was packed as usual in a packing cushion, inside a thick Vinyl bag, inside a thin Vinyl bag, double wrapped to prevent scratches.
Side cover is painted in Black, not a nasty paint job, and if not, I was going to paint it with Compressor, but it is Level with no need.
The 3-pin installation was also done securely and without any discomfort.
I can't compare with MINIMOTO because I lost my OEM Product, but I am happy with my purchase.
P.S. There is a MINIMOTO note in the bag, which kindly enclosed a Screw Tightening Torque Chart.
View detail
Mounted on a return-type GORILLA
I did not want to damage my shoes when changing gears, so I attached them to the return-type GORILLA.
I feel some awkwardness in the foot placement of gear changing and footpeg, but I have no problem at all with this Change Pedal.
Thanks to you, Shoes is satisfied with the quality of the product without any damage.
View detail
Pretty good
This is a must for Grom drivers. After installation, the shift operation has completely changed, and it is so much easier to drive in the circuit and around town. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
Way bigger than stock
When receiving this fuel petcock I had no idea how much bigger you could go until I seen it.flows more fuel and perfect for my zongshen 190cc engine View detail
Perfect fitment
These wheel spacers was exactly what I was looking for when I went with the 10in 3.5j rim attached to the stock monkey hubs. Only issue is you will longer hub bolts if you use all the spacers at once. View detail
Not into TTR. (___;)
Not into TTR. (___;) View detail
Used in MONKEY
It is NTN, so no satisfaction or complaints. It is an ordinary Bearing. View detail
Fits: HONDA MONKEY, HONDA GROM, HONDA MSX, HONDA APE, HONDA MONKEY125, HONDA DAX, HONDA CHALY, HONDA XRMOTARD, HONDA CT125CT110 HUNTER CUB
Lightweight and just right for groms.
It is tiny and ExactlySize for groms.
I just put Swing Arm on it, but it is stable.
(Caution!)
Normal rear fender will cut your finger on the License Plate if you are not a little careful.
I will try Fender Eliminator one of these days.
View detail
Size matched Connector is a Honda car (GORILLA) does not seem to fit the
Size matched.
Connector is a Honda vehicle (GORILLA) does not seem to fit the
View detail
Not attached to JB03
The Bracket is no longer usable. I thought it could be attached to the current JB03 since it was indicated for JB02 and up, but I lost it. View detail
Fits: HONDA GORILLA, HONDA MONKEY
I bought it anyway.
I bought it anyway because everyone seems to have bought it to install the Watani. I was right to buy it because the Bracket that came with the Watani had no place to install it. View detail
just support, not strap like shown in ALL of them pictures, a bit misleading since there isnt any picture of just the plate
its just the support plate, not the bracket like shown in ALL of them pictures, a bit misleading since there isnt any picture of just the plate. though it looks good qality its not what I need. View detail
Battery depletion and bulb breakage countermeasures!
I have the impression that the 6vEngine runs out of battery fluid quickly and is prone to bulb failure…
I was looking on the Net and found out that the voltage is regulated by Lectifire and Battery?
And my own tl50 that I got used had dried up Battery fluid!
This is why I decided to buy it to make it Regulator like a modern Motorcycle.
For MONKEY parts, but there are only 4 Wiring, and even if the shape of the Connector is different, it is only necessary to modify the Wiring, so I guess the threshold is low in this area (laugh).
tl50OEM Lectifirer is vertical and horizontalQuantity:2 pcs of Connectors could be popped in.
View detail
Fits: HONDA DAX, HONDA MONKEY, HONDA CHALY 50
For CHALY's Swing Arm.
Used on CHALY's Swing Arm. This allows for Chain adjustment without having to pay attention to the paint. View detail
Fits: HONDA CHALY System Engine, HONDA SUPER CUB 50
MINIMOTO Kickstarter
MINIMOTO kickstarter
Hi all! Great kick, bought it already for previous mopeds. This time I bought a Little Cub for a Honda, it fit just fine. Good coverage, gum, no complaints. Particularly pleased with the normal price.
Hey all! Great kick, bought it already for previous mopeds. This time I bought a Little Cub for a Honda, it fit just fine. Good coverage, gum, no complaints. Particularly pleased with the normal price -------------------------------------- -------------- Minimoto kikstarter Hi all! Excellent Kick, purchased it already for previous mopeds. This time I purchased for Honda Little Cub, just came up wonderful. Good coating, elastic band, no comments. The normal price is especially pleasing. Hi All! Great Kick, Bouught it Alread for Previous Mopeds. This Time I Bouught a Little Cub For a Honda, It Fit Just Fine. Good Coverage, Gum, No Complaints. Particularly Pleased with the Normal Price Powered by Google Translator
View detail
Fits: HONDA LITTLE CUB, HONDA GIORCUB, HONDA LITTLE CUB
Cospa is good
Used for LITTLE CUB.
Compared to before installation, there is a slight pulling feeling in 4th gear.
If not combined with other Parts, there is no extreme realization in the NORMAL state.
Installation is easy, but beginners should check from the CDI position.
Wiring is short? Perhaps because the wiring is short, there is a slight sense of forcing when installing.
The instruction manual is included for your peace of mind.
Satisfied with the cosmetics.
View detail
Compact
Purchased to cut a Chain that was purchased with the wrong number of LINKs.
It is very compact.
View detail
Convenient to have
I purchased this to replace the Rear Sprocket on my APE 100.
The result was not easy to do because it was not spread out enough, but I was able to remove it.
This is a caution for those who use the same application.
But it is useful to have, so it is good to have.
View detail