Reviews
One more twist and it's excellent!
When I purchased and installed the handlebar grip, I replaced the handlebar grip with a rubber grip from For Motorcycle.
Now for the Review, the person who Tandem'd it said that the hand holding the Handlebar Grip hits the back, so in the summer, the driver's back heats up …w, but it doesn't seem gross if you wear a thick jacket and gloves. w
For those who carry children, it is likely to be safer to have it.
As a driver (MotorcycleUser), I struggle with the sensation of a hard object hitting my lower back while driving. It hurts a little. I would like to put a cushionetc. in between, but I can't because the sitting position is too far forward.
Quantity of Cushion:Pair (for Left and Right) If the Handlebar Grip is located on the backrest, it can be used as both a backrest and a tandem grip, and will be very useful.
I hope Manufacturer will improve it.
That said, the texture of the Stainless Steel part is good.
Also, when using the Center Stand or walking around pushing the Motorcycle, it is a different way of using it, but it can be quite useful.
View detail
Good looking exhaust
The attention to detail is incredible. Welds look great. All hardware supplied besides the ones you reuse. Fitment is perfect, nothing had to be modified. View detail
Rear Sets
There are 4 different positions to choose from, and so far I have used a setting close to the standard. I like the texture and the logo mark. The standard footpeg position was vertical, but the footpeg position has been moved back, which has improved the position of the footpeg! I wish I had changed it earlier. View detail
Big performance header pipe
About quality and texture, I can confirm that the quality is great and that the materials used is stainless steel for the muffler and stainless steel for the header pipe. About the feeling of use, I bought this exhaust system because it has a big performance header pipe to help obtain the most out of my modified and it does generate an enjoyable level of exhaust noise through the short muffler. Products to buy together, A larger throttle body to help obtaining even more performance would be ideal to also add to your cart. Difficulty of installation, I can say the fitment of the exhaust system was very easy due to the small number of mounting points for the exhaust and the easy acess to these mounting points on the bike. Everything from one end to the other lined up perfectly. Cost performance and comparison with other products, The pricing of the product is great. From a well renownd brand you receive an performance exhaust system that is made using high quality materials and has a design all of it's own. It's the best value big performance header pipe exhaust system you can purchase. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Over racing stainless titanium exhaust
A beautiful exhaust with amazing sound, fast shipping,low price very good quality with excellent paint job on it.thank you View detail
No more attacks on the calf.
When I installed the Brake Sidefootpeg, I thought about it a bit, but still, looking back now, I think It should be easy…" I feel that the difficulty was caused by the conceit that the OVER side is looking for. ABSBrake hose joint bracket must be removed. I ignored it at first and installed it all at once, but after I finished, I found out that the rotor was rubbing against it, which was interfering with the rotation of the rear wheel …, so I had to once again close it and reinstall it, which was a troublesome process. Please follow the instructions in the Instruction Manual if you are considering purchasing this product. View detail
OverSwing ArmType7
I installed it at my friend's Garage, but it's tough without two people.
Rear footwork is now lighter for comfort.
View detail
Highly detailed heel plates and smooth pedal operations
About quality and texture, I can confirm the quality great and the material used is aluminum that is CNC machined to shape and finished with an all silver anodized coating.About the feeling of use, Highly detailed heel plates and smooth pedal operations are a massive improvement over the original Honda parts.Products to buy together, Over Racing make many high quality parts for the Monkey 125 and the addition of their front fender mount bracket to your cart would be recommended to further add detail.Difficulty of installation, I can say the fitment of the rearsets for my installation was easy due to the ease of access to all the mounting bolts and included instuctions on how to assemble the kit.Cost performance and comparison with other products, The pricing of this product is good, you receive parts made from high quality materials and with a higher quality finish them most others offer. There are cheaper and higher priced options but I find the Over Racing product the best compromise.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Good news *optimized for little ones
I am short and have short legs.
Lowered with Lowdown Kit when purchasing GB350S
Seat uncoated and lowered to the limit.
The side cover was in the way and the footing was not good.
I wanted to keep the GB350S Logo, but when I asked the manufacturer about it, they said it was a little bit too small.
I bought it because I thought it might improve my footing.
The Side Cover Left Side can also be fitted with the original key.
The Left Side has a slight bulge of the Side cover on the inside due to its structure.
The Side cover of the Right Side is almost flat, which contributes to a large footing. Thanks to this, the right foot can step on the ground firmly.
When installing Right Side, it can be installed by lifting it up slightly without removing the tank.
Minus1 because there was a hole in the License Plate and it was unnecessary for me who wanted to Design.
View detail
Fits: HONDA CBR250RR
IdolUp in the morning is pretty bombastic.
It's pretty cool, and the satisfaction of a Full Exhaust System is outstanding!
As the title says, it is quite noisy during IdolUp in the morning. I have my neighbors' eyes on me, so when I hang up my Engine, I immediately start off at a low speed. When I enter a residential street on my way home, I put the engine in 3rd or 4th gear and try to keep the rpm low. Also, I always greet my neighbors and Sorry for the Motorcycle being a little loud, Sweat." It is very important to say "I'm sorry. I believe that modified cars are looked at more strictly by neighbors than you think.
Also, I installed it on a 2023MODEL, but it is an illegal modification, since it is not Manufacturer compliant and has not been Japan Government Certificated.
To install, purchase two new exhaust manifold Gaskets separately. Even if you reuse the gasket, the shape of the flange is completely different from the OEM manifold, so it will leak gas even if it is tightened.
Once the IdolUp settles in, it is moderately loud and does not make your ears uncomfortable while driving due to the sound of your own exhaust, and it definitely improves the overall quality of the car body, even though it is very expensive. The sound quality and appearance are definitely different from the cheap straight pipe-like Slip-on Silencers that students tend to wear.
View detail
Fits: HONDA CBR250RR, HONDA CBR250RR
Downward is Recommendation!
It is a definite product. Accuracy and workmanship are unquestionable.
The caliper can be installed either up or down, and if it is up, the hose can be used as OEM, so it is not so difficult to install. However, if you are going to install Brembo caliper, it is recommended to install the caliper facing downwards, because it gives a race ish atmosphere and it does not cover the exhaust system, so it has a great stress-up effect. However, the hose needs to be extended with other brand products.
Since we are here, I would like to introduce the Caliper that was installed. Crab caliper 84mm. Mounting Pitch 84mm. The mounting pitch is 84mm. Also, a banjo bolt for Brembo 1mm pitch is required.
Parts required for downward mounting are 800mm hose (Swage line for me), SIDEBend 20 degree Banjo adapter, and Flare nut adapter (convex). And of course DOT4Brake fluid. There is a hang for air venting, and the Caliper must be removed from the Bracket and turned upward to vent the air.
View detail
Fits: HONDA CBR250RR, HONDA CBR250RR
No problems at all. Reliable product.
Brake, so I made the work SuKill a PRO class.
The actual difficulty of the work is about medium-low. However, do not do DIY unless you are absolutely confident.
The product is very accurate and everything worked without difficulty with Bolt On, all Bolts that hold the Bracket and Caliper in place are included.
Since we are here, we would also like to show you the Brembo caliper that we installed. Brake CaliperP4 30/40 40mm for Right Side It is. The Point of choice is “40mm Pitch” and “for Right Side”.
The hose can be installed as OEM. However, the banjo bolt requires a special brembo “1mm pitch”.
1L of DOT4-rated Brake fluid is more than enough.
View detail
Best product for the price!
This is one of the most expensive Fender Eliminator Kits available, which is why it has a satisfying and luxurious feel to it.
The Aluminum Cut-Out Body has a luxurious feel that is different from inexpensive kits that are simply folded steel plates.
The quality and precision are unquestionable, as you would expect from OverRACING.
It was a little more difficult than expected, and required some dexterity in the wiring process and the need to support four bolts and collars of the mount at the same time. But if you take it one at a time, you should be able to do it without any difficulty.
View detail
2023MODEL requires processing
The OEM handle position was looser than I expected, so I installed it to make it more Sporty. The position was not so Spartan, so it is easy enough to ride. Above all, it looks cool!
There are a few things to note. The 2023MODEL has a different Left switch box, so the position of the positioning potches are different (if the model is compatible, the potches are pre-drilled and can be installed without any modification). I drilled the holes myself with a drill.
Also, the Handlebar is hollow, but has a strange structure with 16 pies about 2 cm from the entrance and 14 pies at the back. It is better to choose a bar end with a deep structure and a 14-pie size. Of course, bar ends for cbr250rr cannot be installed.
So there is a little Habit, but the product is great.
View detail
Quick shifter interferes with Cowl
I installed it on my 2023MODEL. First of all, the appearance and quality are great! The position is cool and sporty. The position is cool and sporty, but the knees are more folded down, so long touring is a bit tight on the joints. When I put my foot down at a stoplight, the OEM footpeg is right where the footpeg hits my foot, but with the Rear Sets, I can put my foot down without any stress. Also, as mentioned in the Title, the RubberBoots of the Shifter interfere with the reverse side of the Cowl on the Quick shifter car, and the Shift does not return, and the Pushing feel is lost. I was very disappointed at first when I didn't know the cause. As a solution, I put a washer on the Shift link and adjusted the position of the Linkage. The manufacturer does not provide the 2023MODEL compatibility, so you are on your own. View detail
The product is very good. But it is expensive.
Folding feels good as a Snap. The finish is also good.
It is very good as a product, but the price is too high. But the price is too high.
View detail
Fits: SUZUKI KATANA, SUZUKI KATANA, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT
It's safe!
I bought it to prevent Wound when I was standing up.
Loved the look of it.
The printing on the Right Side was a little smudged.
Installation was easy.
Tightened by torque wrench
I am glad I purchased it in terms of Total
View detail
Highly detailed centre piece and comes with sleek constructed arms
About quality and texture, I can confirm the quality great and the material used is aluminum that is CNC machined to shape and finished with an all silver anodized coating.About the feeling of use, This front fender mount bracket has a highly detailed centre piece and comes with sleek constructed arms.Products to buy together, By relocating the front fender from it's original position you have removed the ability to secure the front brake hose, the addition of a fork leg clamp to your cart would be recommended to bring back this ability.Difficulty of installation, I can say the fitment of the front fender mount bracket for my installation was easy due to the ease of access to all the mounting bolts and included instuctions on how to assemble the kit.Cost performance and comparison with other products, The pricing of this product is good, you receive parts made from high quality materials and with a higher quality finish them most others offer. There are cheaper and higher priced options but I find the Over Racing product the best compromise.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
That's what I'm talking about, Mr. Over.
I decided on Over's Rear Sets because they were the best looking. Although the price is not kind to my pocketbook, the construction is solid and reliable. I decided to go with the more expensive black color, but it turned out to be the right choice. View detail
Satisfied
About Quality and Texture-> Like The Sturdy Quality Rather Than Plastic of Genuine, and the Embossed Finish is Great About the Feeling of Use-> FITS VELL LIKE ITS Genuine Parts Different Cost Performance and Comparison with Other Products-> a Bit Expensive Compared to Other Products, But Worth It About Shipping and Packaging-> SHIPPING WAS FAST and The Packaging Was Indian Packaged Carefully. Any Concerns, Cautions, or Advice When Purchasing-> Satisfied So Much Installed on CB1100EX. It fits very well. The genuine cover is plastic, so I was a little worried, but I like it because it is very sturdy.
The embossed design finish in the shape of the cooling fins is also great. Delivery to Korea was very fast, and the packaging was individually wrapped on both sides ----------------------------------- ----------------------- Installed in CB1100EX. It fits very well. The pure cover is a plastic, so I was a little nervous, but I like it because it was very solid. The finishing of the embossed design of the cooling pin shape is also excellent. Delivery was also very fast to Korea, and the packaging status has been packed individually. Powered by Google Translator
View detail