Reviews
For Grip heater
I always use this because it is easy to install, although it is battery-direct.
I use it for Grip heater for wrapping.
View detail
![[K TOUR] USB Power Supply Kit (2-Ports)](https://img.webike-cdn.net/catalogue/images/104393/80-757-14700_1_TS.jpg)
Fits: HONDA CT125CT110 HUNTER CUB
USB power supply
I was worried about the OEM Cigar Socket, but decided to go with this product which has a USB Socket in one piece.
Installation was easy and took about 15 minutes.
We have yet to run in the rain, so we are looking forward to the waterproof performance.
View detail
There is not much difference in price between a bite and two bites.
The price difference between one and two mouthfuls is not much, so two mouthfuls are purchased and fitted.
Since we had previous experience installing this product, we were able to install it without difficulty, even though there were differences in considering the wiring path and mouth mounting points for that model of car.
If possible, I would like to see a Bullet Terminal included as well as a direct Battery terminal.
View detail
WaterproofRubber, lid, and other details are well made for a reasonable price!
As you can see from the pictures, the WaterproofRubber part and the lid are of high quality!
But at a very reasonable price! Hardly visible once installed on the car body, with great looking details.
Tie Wrap and Double-sided Tape are also included.
I was very impressed with the way they made their products from a user's point of view.
View detail
Fits: Others
USB power supply installedImpression
Since the Slim Body and the Transformer Unit are separate, I think the reliability of each part is high.
In my case, the Transformer Unit was wired together in the Head lineCase, so I am satisfied with the Large change in appearance and as a Refreshing.
There is a generous Ampere value even when charging a smartphone and SENNA at the same time, and there is a very high degree of practicality.
It is considered a recommended USB Power Socket.
View detail
Perfect for long distance touring!
I occasionally go camping touring on my Ninja 250SL for long distance trips of about 500 km each way and overnight stays.
I bought this because I want to charge my iPad mini, my phone, Mobile Batteryetc.… and many other things that I bring with me.
Frankly, the price is high, but the build quality is ◎!
Week Point is that the Connector part is a little easy to pull out, and the price is too high!
Overall, it's a RECOMMENDATION!!!
View detail
Fits: HONDA CT125CT110 HUNTER CUB
Is it an OEM Product!
The installation was not easy, even for beginners, as long as you follow the instruction manual. I don't know how it looks in the daytime, but when the sun goes down, it glows and looks beautiful. View detail
Compact
Compact, so the Handlebar area is clean. View detail
GoPro can now be charged.
I was using their 2.1A 2-port USB power supply and was unable to charge both GoPro7 and 10. I was able to charge my phone. This time I used a 4.8A (2.4A) The GoPro is now able to charge without any problems, which is quite convenient.
Installation is easy because the Plus side of the power supply is taken from the front brake switch by branching it out with a short cable.
However, if possible, it would have been better if the connector was the same as the connector that is taken from the battery of the 2.1A product. The cable of this product is thin and a little insecure, and its red color is conspicuous, so it requires some ingenuity to hide it around the handlebar. We also insulated the flat terminals & Bullet Type Terminal (water proofing).
In addition, the cable length from the transformer to the connector is shorter than the 2.1A product, and the USBConnector is larger, so it could not be easily attached to the original position.
In my case it was a replacement, but I think it would be easier for new installers.
View detail
Replaced one mouth with two mouths
Right now, I have two ports linked to the key, and one port with a constant power supply.
I purchased this product to change the car navigation system and Bluetooth transmitter power supply to a constant power supply.
I have been using two of them for 4 or 5 years now and have had no breakdowns, etc.
Wiring and installation is easy as long as the Tank is removed, which is recommended.
After the exchange, there will be 4 ports, but Ron Two is a Tank Bag guy, so he can also charge his phone (he has 2) inside.
The battery was also replaced recently because it seems to be a burden on the battery.
For touring in the rain, DAYTONA products have a cover for the plug side, which does not adhere closely.
It provides a reasonable amount of protection from the rain.
(I've had no problems with heavy rain so far, thanks to Cowl maybe...)
View detail
Small, unobtrusive, and good to be able to MonitorRing the battery status.
[How is it used?
Mounted on a ZX6R 2023. For charging your phone or Lap timer.
Was the installation difficult?
The ZX6R G-type has an Attachment power supply under the Right inner cowl.
There is a BlueWhite + side and a BlackYellow Earth side inside the Waterproof Rubber cover along with a RightBlinker Connector.
Once the Bullet Terminal processing of this product is complete, it is easy and convenient to install by simply inserting the terminal.
The problem is where to put the USB port. ZX6R has no space around the handlebar. I mounted it on the SIDE of the Ram Air Duct, which is fixed with Magic tape so it is easy to remove.
Most people would install the Multi Bar and attach the insert there, but I had a hard time because I don't like clutter around the Handlebar and didn't want to install the Multi Bar.
The picture of the product does not show a Bullet Type Terminal, but in reality, for some reason, a Male Terminal was attached to Both Sides.
【good point】
It is good that it is Compact and unobtrusive. It also has a Lamp that tells the battery status, so it can be used as a simple voltmeter.
Anyway, it is a recommendation for those who do not want to put anything conspicuous around the Handlebar.
[Bad point]
It is unusually hard to insert the USB port into the slot. I don't know if it is made hard so that it won't come out while driving, but it would be easier to use if it were a little easier to insert.
Minus the slightly higher price.
It also has one port, so it is not convenient for those who charge various things or use Grip heater.
View detail
Exclusive Design makes it easy to use.
Quantity to Smartphone Holder:It is good because it is difficult for the Cable to interfere with other places, such as when the charging Cable is connected in the set state. View detail
![[K TOUR] USB Power Kit](https://img.webike-cdn.net/catalogue/images/116602/80-757-24400_1_TS.jpg)
Fits: SUZUKI GSX-R125, SUZUKI Gixxer 250, SUZUKI Gixxer SF250, SUZUKI GSX-S125
The texture is not bad.
I bought the USB Power Kit from KITACO, a long-established MotorcycleParts company, because it was new to me.
As for the texture...it is not that different from the Chinese products often sold on Amazon or other places.
Installation, although it's kind of nice that Wiring has it pre-prepared.
Translation (Please enter hereManual is hard to see say ha drill....
It is a little difficult to install, but the difficulty level will be low for those who usually do this kind of electrical work.
The feel is fine
It has a rubber lid and is Waterproof Specification.
When not in use, put it on tightly and use it.
However, as I mentioned earlier, I don't doubt that it is a little expensive in terms of texture.
Translation (enter hereManual, WiringThis product may be easy to install for those who do not know where to take it from.
View detail
USB power supply
I installed it in an inconspicuous place on the meter panel and am very satisfied with the large size. View detail
Simple and I love it!
I installed this for charging my DVR when touring and I like the simplicity of this OEM product. I also used webike's Point this time, so I can't say enough about the product. Thank you very much. View detail
Needed for going out a lot. Safe to use with a secure lid.
I bought it because I need a map when I go to the woods and touring.
The product was designed to be a battery charger, but we decided to use the Attachment power supply since there would be few situations like this. (Modification at your own risk~)
I bought it without much comparison with other products, but there was a box like IC Box in the middle of Wiring, so I was worried about where to put it.
If you go Off-road, you can rest assured that the lid is secure!
We drove through dust and rain, but no Large Trouble!
View detail
You must choose which Connector to use
The product is fine.
However, there are quite a few restrictions on the Connector to be connected with a deep USB port.
View detail
Fits: HONDA CT125CT110 HUNTER CUB
Must-have item
I installed it myself on a CT125.
Open the Headlight, make a few adjustments to the Wiring as per the Instruction Manual, and you're done. Very easy.
This equipment is indispensable for charging smartphones and as a power source for Grip heater.
View detail
Separate handle savior
Separate handle has no mounting space anyway, so I appreciate this kind of product.
I managed to get into Limit on the YZF-R3!
View detail
Fits: Others
Easy to run while charging
I thought about attaching it to the Handlebar, but decided on this location because it is as close as possible to the phone and GoPro, and also because the Cable does not move when the Handlebar is turned off. (See photo).
Looking into the wire exit from the body, the waterproof property is Zero. The inside Print board and soldering are visible and the construction is crude. I sealed it with Holtz sealer.
The installation itself is easy with a single screw, but it was very troublesome to remove the cowl when I wanted to install it in a position like mine.
However, it is now very easy to shoot Video and drive by Navigation while charging.
Two ports allow simultaneous use with both smartphones and GoPros.
View detail