Reviews
GOOD!!
very nice screen!
I'm a Korean,
It blocks the wind very well, the delivery was very fast and the dress-up effect is excellent.
It is a product that I strongly recommend.
Get it quickly and install it pretty and practically,
This is Anra Mubok. ------------------------------------------------------------ -------- It blocks the wind very well, the delivery is very fast, and the dress-up effect is excellent.
I highly recommend this product.
Get it cheap and wear it pretty and practically.
View detail
The windproof effect is moderate, but Visual is good.
The Screen is moderately high and not as windproof as the Puch Touring screen. But the Visual is good.
I like the fact that the Screen extends right above the Mirror Bracket.
View detail
Parenthesis OK
Buy with Y's GearScreen→MRA.
DesignIt's good and powerful.
View detail
It says Original Shape.
I bought it because it is original shape of GSX1100S KATANA.
It is wider than Original and less sharp
No change in height.
The person who installed it is pleased with the increased windproof effect, but
Please be careful if you insist on Original Shape!
View detail
It took a while, but I'm satisfied.
After 22 years, the OEMScreen became brittle with age and cracked just by catching the Motorcycle Cover, so I bought it for replacement.
In addition to the body, it comes with Rubber molds and Stickers for the Edge. There is no protective film on the body and there are some scratches. It will be scratched sooner or later, so I'll just ignore it.
It seemed that there was no stock in the FOR JAPAN MODEL, and it took more than two months to arrive. Because it is not a very MAJOR car model, it is unavoidable, but it is not possible that the delivery date had become 2 or 3 weeks in the purchase page.
The thickness of the body is a little thinner than OEM and the center part is bubble shaped. The center part is about 3cm upward in bubble shape, and both SIDEs are spread out about 2cm to the front side, and the area increases, and the windproof effect can be expected.
Although the installation accuracy is still not as good as OEM, I was able to install it without any problems in about 30 minutes.
I didn't like the design where the front side was raised as if it was for touring, so I am satisfied with this Screen including the design.
View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R750 R, SUZUKI GSX-R1100
I ordered it three months ago.
[Color] I ordered the Clear/Gradation but received the Ku Only rear. View detail
Only at high speed!
I bought it looking for a Screen that would look good on NAKED.
Looks good and parenthesis well, fast and very easy.
After all, it's so much easier when the wind doesn't hit your body!
If you like NAKED, but find it hard to go fast, try it!
View detail
Design looks more sporty!
[How is it used?
I go to Touring and mountain passes exclusively.
As for the purpose of purchasing this product It will be dressed up.
Was the installation difficult?
The Allen Wrench is used to remove and install the 3mm Hexagon Socket Bolt, so it's an easy swap!
This time I bought a black one, but by replacing the bolt with Honda OEM black plastic bolt, it looks more sporty! (Black Plastic Bolt part number:90109-MCJ-750)
How was your experience with it?
In daily use, I could not perceive any specific difference from OEMScreen.
I haven't driven on the highway yet since I installed it, so you may see a clear difference there.
[Included Parts:were they on?
The braid that covers the edge of the Screen is included, but it is long, so we recommend that you cut it after installation.
[Was there anything that disappointed you?
It may be individual, but I may have run over an outlier as it appears to be slightly less adherent.
It is very easy to get dust and water stains, so you might want to hang Coating when you install it.
The price is a little high, but I was highly satisfied with both Design and Coloring!
View detail
Fits: YAMAHA TRACER900 GT (ToRacer900GT), YAMAHA TRACER900 (Tracer900)
The wind hits more than OEM
Because it becomes Smaller than OEMScreen, the wind naturally comes to hit it.
The reason why I bought this Screen is because when I took a picture, I thought it was OEMScreen. [Color] Because it is Clear, the existence does not seem to be thin, so ignore the windproof effect. [Color] It's smoky and photogenic, and I decided to go with this product, which is Sporty and Small.
I bought this for looks and it was less windproof than the OEMscreen.
View detail
i love this
smoke is better look. very nice thanks it took 2months to wait time when warehouse arrived it was fast delivery. works good with 21 cbr650r View detail
Instruction Manual is completely useless.
The product is fine, but the installation instruction manual is in Italian and the pictures are not clear.
I have no idea how to fasten one place.
No response when I contacted the agency.
View detail
Fits: KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200R
It looks and performs well.
Compared to the NORMAL Screen, it looks much better and gives a more custom look. It is easy to install with just one Hexagonal Wrench, and the precision of the brand is high. View detail
Windproof effect + Parenthesis goodness
Is it in the category of STREETFIGHTER? Z250, but it is Naked motorcycle in Large frame.
I don't feel much wind in the lower half of my body because of the Large pattern Shroud, but the Meter visor that comes with the OEM has Zero wind protection.
I installed it to reduce the wind on my upper body when driving on long touring and highways.
As for the effect, the wind that was hitting my chest became about the mouth of my shoulder, and high-speed driving became considerably comfortable.
However, it doesn't have the same effect as making the Full cowl model High Screen.
If you are looking for even more wind protection, the UniversalHandlebar MountingMODEL may be more effective.
The installation itself is not so difficult because it can be done by changing 4 screws.
In my case, I didn't want the wiring of the back of the meter to be visible because the space that can be created after the replacement is large, so I installed it on top of the OEM screen.
I hesitated with Screen made by other companies, but I chose it by simple design.
I was a little concerned about the small visor figure, but after installation, I think the balance has improved and I think it has become quite manly.
The price may be a little high, but the effect is there and the Design is Good.
View detail
Does it work so-so?
I switched from Full Cowl (YZF-R1) to NAKED (1290 Super Duke R).
I felt that the influence of the wind was rather bad while driving on the expressway, and I thought that I would be able to protect myself from the cold because I was going to move to Hokkaido.
I've only driven about 200km due to a declared emergency, but I'm comfortable there on the highway.
I don't think it is comparable to Large Threshold Screen like Tourer, but I think you can feel the effect.
I think the installation process is pretty easy, but the positioning was a bit troublesome for a clumsy amateur like myself (I installed it once and readjusted it later).
If you apply too much force, the bracket and the screws will come off.
View detail
Well, the windbreak is not so bad.
I'm using it on my SV650ABS.
Installation is easy. As long as you have the tools, I don't think you'll have any trouble.
The design is rounded line, and I think it's the best parenthesis among many Screen.
As for the feeling of use, since the Screen bar is fixed to the HandlebarStem, the bar interferes and restricts the installation of ETC. As a result, the Handlebar area becomes a mess.
As for the windproof effect, I have not been able to compare because I have only used this, but the wind hitting the body (chest) has decreased.
However, it seems that the wind concentrates around the Helmet. (It may be my imagination)
View detail
Vehicle Inspection Measures
MRAScreen is installed, but the bracket of the braid fixation is lost (often). I had to replace the braid because it was deteriorated. It is very nice that you can sell it as a lacing braid set. View detail
It's cool and functions well.
[How is it used?
OEM was also no Brown pain Brown clean, but in order to make the whole Motorcycle sharp Stylish, Aero replacement also in view.
The result is cool and beautiful.
Good wind protection.
It's cheap. Satisfying.
Was the one you received as per Image?
Yes
Was the installation difficult?
Inner cowl needs to be removed.
It's a pain in the ass.
How was your experience with it?
Satisfactory
[Included Parts:were they on?
No
[Was there anything that disappointed you?
None
It makes it look tighter.
View detail
Fits: KAWASAKI NINJA650R, KAWASAKI ER-6f, KAWASAKI NINJA400R
I'm Well in the Clear!
I was a little concerned about the strength of this product, but it is Large strong!
It's softer than the OEM Product, but not a problem at all.
I like it because it is clear and gives the motorcycle a tighter look. Guard on the rim, easy to install!
I think I'll Repeat next time.
View detail
If you like the look, it's Recommendation!
[How is it used?
Mainly used in Touring of 100-200km
Was the one you received as per Image?
It's a lot bigger than I imagined.
Was the installation difficult?
The Screen itself is easy to install. I didn't install the molding because it was difficult to install.
How was your experience with it?
Much less wind pressure from the neck down on the highway!
It's a lot easier to get down lightly.
[Included Parts:were they on?
[Was there anything that disappointed you?
It's a matter of taste, but I thought it was a little too Large.
I hesitated with the GIVIScreen, but I decided to go with this one, which is a little bit larger and emphasizes the windproof effect.
View detail
Fits: KTM 390DUKE (390DUKE), KTM 200DUKE (200DUKE), KTM 125DUKE (125DUKE)
More effective than Bikini cowl
It fits perfectly with the design of my DUKE125, it's a 125 so it's more about looks than wind protection but it's very good looking and I love the visibility.
No doubt about it.
View detail