Reviews
Fits: HONDA LITTLE CUB, HONDA MONKEY
A practical introduction to understanding the basics of 4-Stroke EngineCrank
Crank for 4-Stroke Engine (Under the waist) Purchased for basic understanding of maintenance. it is for MONKEY/SUPER CUB Horizontal TypeEngine, but the basic structure of 4-stroke EngineCrank is the same, so where does it go? What is the basic structure of 4-stroke EngineCrank, where is it necessary to insert oil, what is the procedure, what are the precautions? What is the procedure, what are the precautions, etc.? It is a good textbook to learn from practical basics, with explanations of detailed vital points and easy-to-understand pictures. I think it is a good book to learn from the practical basics, and from here, it is also good to actuallyose and maintain the engine and crank, and then move on to older cars such as 400cc and up. There are some specialized books on crank mechanism, but this book is an introductory book that you should read through because it starts from the basics. View detail
Fits: HONDA SUPER CUB 50, HONDA MONKEY
Practical Basics of 4-Stroke Engine Overhaul
4-Stroke Engine (above waist) Purchased for basic understanding of disassembly, assembly, and maintenance of MONKEY/SUPER CUB Horizontal TypeEngine, but the basic structure of 4-stroke engine is the same. Where do you need to oil, what are the precautions? You can understand what the procedure is. It is a good textbook for learning practical basics. From here, I think it would be good to actually start with the actual maintenance of the engine and crank, and then move on to older cars such as 400cc and up. There are some specialized books on engine mechanisms, but this is an introductory book that you should read through because you can learn from the basics. I think it is inexpensive at 900 yen per book. View detail
Lightly raised.
It goes up surprisingly easily.
The first time I did it, I didn't always notice if it went up in time.
Since we do not exchange Tire, this is sufficient.
View detail
Lightweight, portable, and fully functional
[How is it used?
Used for maintenance
Was the one you received as per Image?
Stainless steel (maybe), good texture
How was your experience with it?
Stable and lightweight when in use, easy to carry, and foldable when not in use, so it doesn't take up too much space.
[Points to note]
None
How did it compare to other products?
Cost performance is good and nicely done.
View detail
Garage is Race ish and feeling great!
It is useful for maintenance of the Motorcycle in an upright position. It makes it easier to clean the wheel along with maintenance. View detail
SizeExactly！
After all, this is effective in order to keep Motorcycle from Wound!
Size is also an Exactly requiredItems!
View detail
![Service Manual [Complete Version]](https://img.webike-cdn.net/catalogue/images/111384/service_manual_yamaha_TS.jpg)
RD250Service manual
I have been looking for a Service manual for a 1976, RD250 for a long time and I am glad I finally got it. Thank you again. View detail
Fits: HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750
This one book is OK up to the 2008 model year!
It is listed up to F4, so it is OK up to the 2008 model year!
I was satisfied with the Large change!
View detail
Fast Freddie
What did this former hero, who lost so much in his divorce, have to say?
Surprisingly enjoyable
View detail
Rear stand hanging is easy
I found the product by chance, searched for it on Webic and bought it. It is super easy to hang Rear stand especially in Garage. I wish I had bought it from the beginning. I highly recommend it. View detail
Great stability!
Anyway, easy installation. Lever length is just right.
A 200 kg Large Motorcycle can also be easily carried.
Four-wheel Tire and sturdy Chassis for great stability.
View detail
Suitable for any type of car
Anyway, it's easy and convenient!
There are several different thicknesses of Head.
It is basically applicable to any type of car!
Cheaper than J something and perfect quality.
View detail
Size fits perfectly! Excellent stability!
Size is perfect
no rattle (e.g. when measuring time)
Motorcycle also does not come with Wound
This Hook has excellent stability!
I'm glad I went OEM... ♪
View detail
It is built with outstanding reliability.
It is made in Japan and has excellent stability.
The price is high, but it is better than using STAND, whose strength design is not well understood.
The L and V receptacles are sold separately, so you should use them for your own vehicle and application.
My vehicle is a KTM, so I bought and use the ShortV receiver.
When lifting, it is easy to place a piece of wood under the vehicle's Side Stand, keep the vehicle as upright as possible, and slide the Roller Stand under the vehicle in an image.
If you are not familiar with it, lift it carefully so that the receiver does not come off.
I think that up to 180 kg or so can be pushed in and STAND applied with their hands without using their feet.
View detail
good quality
Purchased as an addition to the company's Roller stand.
I don't have to tell you about the fit and consistency. I have used it without any complaints.
However, it seems that a protruding part has been added, but I have no idea what this is for...if anyone knows, please let me know.
View detail
Short low ler takes up little space.
The lightness and ease of handling are impeccable. I am satisfied.
I use it on my Racer, but it is also useful when I carry it on the Transporter because I can hang it on my STAND.
View detail
Share No. 1 is no joke.
Certainly, it is more expensive than Chinese STAND sold by other overseas Manufacturers or on Amazon. I had been using other manufacturer's STAND because I could not afford it, but after using it this time, I found out that there is a reason for the price.
The lightness, ease of lifting, and ease of handling all exceeded the STAND I have used in the past.
I thought that the quintessential "FOR JAPAN MODELShare No. 1" was not a date.
View detail
Fits: HONDA BROS400, HONDA BROS650, HONDA VFR800, HONDA CB1000R, HONDA VFR750F, HONDA CB1000R, HONDA VFR800, HONDA Bross 400, HONDA Bross 650, HONDA VFR800, HONDA Bross 400, HONDA Bross 650
For CB1000R
I chose JTrip because they had a Shaft for CB1000R. cantilevered Shaft (Honda'29) JT-135D fits CB1000R (~'17 model year SC60), ('21 model year - 8BLSC80). ('18 to '20 model year 2BLSC80) fits the Shaft with the model number JT-135S80 in phi;18. Until a few years ago, this Shaft was not available and there was an Owner who was in trouble. View detail
It's safe to say that it won't come off.
As the name suggests, we believe that first-timers can STAND on it.
The biggest problem with stand hanging is that the stand may slam when hanging or removing the stand.
The Axle Shaft is hollow, but this product does not have that flap, so you can concentrate only on not knocking over the Motorcycle, which makes the Large change easier on your mind.
I initially tried to use a rear stand from another China product on my 212 kg motorcycle, but it wouldn't lift up at all, so I bought this product.
However, since the Chain Tension adjustment does not allow Axle Shaft Access, I think you will need a Bracket for the L shape or Hook so far.
The quality of this product is very good because there is less shock when lifting up and taking off. I think the quality is very good.
View detail
Freddie！
A Nightmare on Elm Street
Regardless, this made me feel like I was back in the 80's with my NSR!
View detail