Reviews
Fits: HONDA Rebel300, HONDA Rebel 500, HONDA Rebel 250, HONDA Rebel 250
I couldn't respond to the cancellation immediately after ordering
Unable to respond to Cancelation for about 30 minutes after the order, and email inquiries were answered None
I finally got an email on the day the product arrived, too late
View detail
The back of the rear passenger
the back got so beautiful ,the skin is good but only I was upset by the piece of iron on the back of it no I did not know that it is separate . View detail
Fits: Others B47, KAWASAKI VERSYS-X 250, Others B37
It's a good balance!
Case itself purchased from an acquaintanceSizeI bought the wrong product, but the acquaintance was a book I heard that you are going to put a Backrest on the car so I bought it together with the car and installed it
To install it, drill a hole and use a Phillips Screwdriver to drill the screw from inside Quantity:Just install 2pc
There is a mark on the inside of the lid, and you need to make a hole for the screw After opening and tentatively checking the hole position, the hole was expanded to screw size Because there is a seat like RubberWasher, you can work easily with a little gap
The purpose of this model is the balance in appearance
The material is different from the appearance, it is a soft Cushion rubber, and it is weatherproof The sex seems to be pretty good there
View detail
givi 42-liter back is perfect for.
This product is the product for the fellow back together. With this product, you can lean back comfortably from the existing rigid ride. This product makes traveling on motorcycles easier. Because this product makes me feel better together. You can also buy this product. I am very satisfied. View detail
Sissy bar Backrest Pad (STEED 600)
The Fitted sissy bar info >> https://www.japan-webike.kr/en/products/2075672.html Back side of this pad looks(feels) like wood or MDF? PVC? IDK(i dont know) anyway ts Hard material i guess @_@))) soft and cushion and the mount bolt using 4" Allen wrench with washer. i hope this bolt and bar get no Rust... take care Hurricane Shishiba This pad is applied to 720mm. Only Shishiba corresponding to HA6431-HA6432-HA6437 can use this pad. Be careful. View detail
Fits: YAMAHA STRYKER 2012, YAMAHA STRYKER 2013, YAMAHA STRYKER 2014, YAMAHA STRYKER 2015, YAMAHA STRYKER 2016, YAMAHA STRYKER BULLET COWL 2015, YAMAHA STRYKER BULLET COWL 2016, YAMAHA STRYKER 2011
Good product
Fits the 2015 XVS1300CU
When using Saddlebag Support in conjunction with it, the longer (100mm?) You might want to get a separate Screw
When it comes to detachment, you can push in hard to get the Quantity:It's locked up after it's set, so you don't seem to have to worry about it coming off
The Key to be worn by the wearer, but it is not bundled with the Parts of Screw and Others, but is wrapped The shape of the key is The same shape as the XVS1300CU is the Quantity:It has 2pc, but of course you can't operate it with the boarding key
The Backrest Pad is described in the product description to the effect that it is sold separately, but it is in the picture Please note that RearLuggage racks are not sold separately and are not included in the package
View detail
Fits: YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA YZF-R3, YAMAHA MT-07, YAMAHA YZF-R25, YAMAHA MT-03, YAMAHA XMAX
If you are cheap a bit more
Small The daughter of the high school year high school graduates began to be interested in Motorcycle and I got more to ride behind, so I bought it for comfort improvement.
It is very popular (^-^)
It is a good part for enhancing comfort, so please use Standard Equipment (As it is the price of Top case) I wish I could..
View detail
Terrible !!
Your product is terrible. The driver and the tender are both used, but the driver is too narrow to use it. So I have to make a bracket like a photo and push it back 7cm so I can sit comfortably. Do not you test when you make a product? Do not you have to pay for expensive money to guarantee that quality? I will never buy a Daytona product in the future !! View detail
As expected, OEM Product.
The Instruction Manual is a little hard to read, but you can replace it in as little as 30 minutes.
Making is solid and the installation is fixed to Frame with 8 mm Bolt 3 pcs, so it seems to be heavy with heavy weight.
However, since BaseCover is blurred black and can not deny the cheap feeling, I got painted in the same color as Body.
View detail
Mounting on NMAX. Eventually removed
Immediately after installation it was possible to use without problems.
About 3 months after around the step after construction etc.. And the noise is (Backrest was not the cause at that time) Occurrence.
Consult with the shop about 5 months or so.
Because there was a Wound in the OEMPillion Bar, when I removed it at the store's Ad Vise, the noise became gone.
Apparently, every time Bolt crossed a step, a part of Backrest's Bolt touched the Pillion Bar causing a strange sound.
It seems to be difficult for durability.
Whether it is an individual difference or not is unknown.
View detail
Fits: HONDA Rebel300, HONDA Rebel 500, HONDA Rebel 250, HONDA Rebel 250
very good
very comfortable, and very strong part!!! but so heavy. anyway, I am very satisfied. Supports posture while riding to reduce fatigue while riding. Commonly used like RiderBackrest. Can be used like TandemBackrest if inverted. The position of the rear pad can be adjusted by changing the top and bottom 2 position types ( 25mm pitch). * The back pad has simple waterproofness, but water may enter the inside when there is a lot of precipitation. Google translate: Supports posture while riding to reduce fatigue while driving. It is commonly used like RiderBackrest. If inverted, you can use it with TandemBackrest. The position of the rear pad can be adjusted by changing the upper and lower 2 position types (25mm pitch). * The back pad has a simple waterproof property, but when there is a lot of rainfall, water may break into the inside. View detail
excellence
Because it is Exclusive Design, it fits perfectly and it shows the high degree of precision that the trace will not remain in the carrier even if it is removed.
Material of Stainless Steel is also very good very safe.
View detail
Large texture
Because it is Large, preference may be different if you consider it as the design of the body.
However, since it supports up to the waist, you can leave the upper body as large as you like, ride comfort is outstanding and it faces long distances.
The accuracy of the assembly was outstanding, and it was able to be mounted without problems in particular.
Since I am diverted from Universal Product and other cars, there are many things to be processed, but it is pleasant to stick with pongs without processing.
View detail
If the price is a bit cheaper - - -
Backrest is also replacing with Case's replacement.
Since Mono - lock 's Backrest which I used so far was a flat shape, it was not good at the back of Tandem, but since it is curved in the shape of the back, it is said that it became very good as Backrest I got a word of praise.
I made a hole in Case after a long absence, but I am nervous.
Disadvantages are high.
Perhaps this is the price of the product itself, but if you compare it with the price of CaseBody, hey, hey - - -
View detail
Fits: YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider
Radar's Backrest must be this
In Japan, it is not sold sadly. Attachment of Stock.
However, it is called weight feeling, it is called texture, there is a good reason not to say anything.
I also confirmed the Other Company Product, but again, I feel that YAMAHA does not correspond to OEM Parts.
View detail
I received a favorable response from my wife
Tandem with TMAX 530, OEMBackrest is low, so I made it to Rear box + Backrest. Because it is Exclusive Design, installation was easy and beautiful..
His wife got a good reputation for comfortable leaning.
The price is a bit high.
View detail
Kijima
Perfect addition to the Honda, looks great feels good, I highly recommend this! Get it for your Honda ruckus or Honda metropolitan View detail
I'm glad I bought it
For Trike I put it somewhat widened and I replaced Bolt for a longer guy.
It is cool to match the atmosphere of Motorcycle !!
I'm glad I chose this!
View detail
My daughter who was afraid of Motorcycle was also satisfied
I attached it for a daughter who is afraid of a two-seater.
I thought that I would throw away the appearance, but when I tried it, this seemed good with this.
The daughter's frightened condition of the original purpose was relaxed.
View detail
Fits: Others B47, KAWASAKI VERSYS-X 250, Others B37
It is more angular and dressed
The frequency of Tandem is quite small, but I bought it with emphasis on appearance.
I installed it in B37 but originally angular design is even more Volume awesome image
I was like Tourer. It seems that Tan Demer has increased security.
It was also a chance to buy cheaply at SummerSale!
View detail