Reviews
It is important to look
I bought it because I got tired of Boots, the other company's products are inexpensive, but I chose Mr. Boa as it was the first one.
Precision and feeling of use are perfect. Appearance has become clearer The performance is?
View detail
I do not understand the difference well.
The picture is an old model but the product came New Model The special tool was unnecessary for installation. Just drop it in the Fork and complete installation.
Feeling of use was almost impossible in Oil of GT - 5 in Normal spring. Small life can be said to be insensitive.
Again, I will not reflect sufficient performance unless I change Spring again
View detail
Is good
If there is enough skill to remove Normal cab, it will easily take you
Negative pressure is explained to be connected to Fuel Cock, but I dared to connect to Air inductor
Since there is no choice, Fuel Cock can be reversed upside-down and responded with a trick technique that can lubricate natural head difference
Therefore, it became possible to use OFF in addition to the reserve
I wanted negative pressure like Dual Silencer like OEM's Adapter so that it can correspond fully to the SR of intention 02 in the desire
View detail
Texture ? It is highest absence.
The texture is good, yet its inconspicuous presence is the best.
Common "Multi Bar I'm here" There is no general claim.
Fastening to Handlebar is perfect, OEM Product same etc. It is more than.
A little value is stretched ? ? ? ? ? ?
View detail
One stone two bird Decompression lever
The goodness of construction is a falling stone Decompression lever.
I wanted to refresh around the Handlebar, and I only made Lever by excluding Wire at the same time as product announcement.
He seemed to have a heat dissipation effect, so I chose a thing with Rubber.
I feel it is likely to have a heat dissipation effect because it is hot when I touch it after running.
Although it is hot at the time of restarting, I do not grasp it all the time, but I do Gloves for the first time.
SR is Motorcycle showing Engine, so I think that it is a satisfactory finish in that respect.
It is certain that it is easier for the Decompression lever to be posted by Wire and have it at hand.
View detail
Do you need to be careful when using it with OEMSeat?
Tank This item is a bulky fixed part. I was glad that it was worrisome about the falling Tank.
I am using OEMSeat. It is an old SR. In the new SR you may not have any of the following.
In conclusion, the position of the Bolt hole fixing the OEMSeat (Seat backward) I could not fix it with Gap.
As a countermeasure, we had to raise the RubberDamper of both SIDE of fixed part of Tank.
In my case, Quantity : Pair (for Left and Right) Push's Aluminum Universal Collar (Quantity) on the bulk of the RubberDamper part of : 2pc. Set Usari) was used. Collar thickness is important whether Nut is closed by raising the crowbar.
If you have any troubles, please help us.
View detail
Sold separately
The light itself is nice, but that's all it is. This is not, by any means a fender eliminator. Everything else you see in the picture is sold separately. View detail
TanCLAIN horizontally
It is a part used to lift the Tank falling behind the SR and level the Line with Seat. If you have a 12 mm Socket and a 5 mm hexagon you can install it. I thought it would be better if the price was cheaper a little more. View detail
According to reputation!
【What made you decide the purchase?】
Net and Impression
【How was it actually used?】
According to the reputation, the vibration of the engine got mellowed overall. The paste of Speed ??has improved better than before. I should have installed it faster.
【Was it difficult to install? (Hard parts case)】 It was easy..
【Please tell me the point of installation and hang (in the case of Hard parts)】
It is the point that decides the length from Hose's routing. When worried it may be better to cut longer and stuff little by little.
[Is there anything I was disappointed about?]
There is none.
【Hope for Manufacturer - Please let me know if you have any improvement points]
It might be better if you specify the standard of Lose of Hose.
【Have you compared items?】
There is none.
View detail
Mounting on SR 400 FI
We installed at the same time as Change Accent. NORMAL is a preeminent Shift feeling in which Cha Chi Chi and Mission came in comparable way.. The texture is also very satisfying Large. I can not go back to NORMAL anymore. View detail
brembo pump nut brand bore ace
The bore ace pump mounting bolt is a hexagonal nut, which is a different design from the original hex bolt. The bore ace pump is a hexagonal head, which is different from the original nut. With the nut made of stainless steel material, which makes it beautiful and easy to maintain. translated by Google Translator View detail
Practical IdeasParts.
<Evaluation point>
The shift accuracy of Shift Pedal is improved. In particular - Improvement effect of Shift touch is clear between 1st speed ⇔Neutral ⇔ 2 speed which is heavy in departure.
It almost never got into Neutral when it was not intended and the Stress of Shift change decreased.
In addition, the product comes with a simple installation Instruction Manual.
<Notes>
Since our SR is the SR that entered the 85th year of the year, there is a possibility of aged deterioration of Shift shaft related Parts, and it is even more "Change Accent" It may have felt the effect of.
I do not know the new SR's Shift touch, and each one of the Condition's different SR "Change Accent" It depends on the individual difference of SR.
<Actual installation> (The method differs according to the year)
? Drive sprocket cover processing
"Change Accent" Has a thickness of 10 mm, "Change Accent" Cut the vicinity of Bolt hole of fixed part by 10 mm. Sprocket cover is Aluminum, so you can easily cut it with Gold Noko, finished with File.
? Material in the Shift shaft : Rubber Sea Ring boots "Change Accent" We cut the thickness of 10 mm and used it.
<Last>
I think that the price is somewhat high, but it is unavoidable because it is not a large quantity product produced by SR dedicated Parts.
The method of physically restricting useless movements other than the rotation of the Shift shaft in this Parts is reasonable and I felt that Ideas would be the one who knows the SR really well.
View detail
Design, Best for both cooling performance
Because of the effect of Heat Radiation Fin attached to countermeasures against the temperature rise of Engine due to the Bore up of Bear MONKEY, install it in order to further improve the heat dissipation effect.
Considering Design, fixed with Black's Taper bolt instead of the attached Bolt.
Heat dissipation effect rises as expected, Dress-up effect is more than expected
View detail
Cooling effect + Dress-up effect
Kuma MONKEY 's SStageBore up accompanying measures to increase oil temperature Purchase installation was too long in the attached Bolt and wanted to make the BlackBolt of Stainless Steel so M5Taper cap bolt 35 mm under the head Quantity : Buy and install 2 pc. Heat dissipation through Bolt, but the temperature of Body will be quite hot, so the heat dissipation effect is high. After installation, the oil temperature drops by about 2 to 5 ° C, and the temperature decrease speed after stoppage surely becomes faster.
High Dress-up effect
View detail
It is a necessity to attach Meter to the company's Top Bridge
When installing in the same position as the OEM, it becomes installation with one Bolt. There are types of OEM's anti-shake rubbers and those of Rigid mount. I think that the former is better for Tune SR in particular because it is a strong motorcycle.
Do not forget the Screw lock!
View detail
External Rear Sets Fit to fit Fee Ring for improvement
I mounted Shinkansen Rear Sets and improved Shift feel, but I installed it expecting even better. As I said before, I get the impression that the Stroke at the time of SHIFT UP & Down has decreased slightly. There is no dramatic change like changing to another Motorcycle, but I think that Shift feel has improved a bit. I think whether it is good if I do not feel dissatisfied at the moment. View detail
Quantity : Pair (for Left and Right) Total Quantity : 2pc. Set installed
It's a Dress-up purpose rather than hanging on luggage.
I exchanged because OEM's Nut was rusty
Although it looks definitely better, I'm using it as a decoration to the last because I'm scared to put on my baggage
View detail
I installed it in the 2004 model SR 400.
I purchased it with Exclusive Collar for the above-mentioned year formula.
Sprocket cover Body is unprocessed, but it disconnects Rubber Bush and removes it and replaces it with Color, so irreversible processing is somewhat necessary.
The installation itself is easy, but because the handling explanation is insufficient it got slightly lost.
I can feel that the Touch of Shift change after installation has changed, but it was not such a drastic change.
I think that it is effective for vehicles that are pretending to be Shift in old age and vehicles of Rear Sets.
Moreover, I think that it is possible to expect to some extent the effect of reducing the load from the change lever from the principle and preventing play from coming in the future.
In the case of a relatively new year type vehicle with Normal step, if I feel difficult to enter GEAR, I think I should replace the engine oil first.
Regarding price, I think that it would be inappropriate if I think about making it, but since it is simple, I thought it would be a little cheaper.
View detail
The effect is absolutely Large!
Because the reputation of the world is good, I installed it in SR 400 FI
Machine noise decrease - Torque up and the effect is absolutely Large
From Carburetor Vehicles it seems that FI Vehicles is more effective than Large
View detail
BORE ACE Bore Ace Rear Shock Fixing Nut
Product name is Rear Shock Fixing Nut, but this is very useful as it can be used as Loading Hook
Generally it is used to fix the top of the suspension but can also be used at the bottom
The meaning to put on the bottom? When falling etc etc. You can also use it as a Slider to protect your high suspension
Size 22 mm Meter's Spanner and Double-end Wrench are required for installation
View detail