Reviews
Swingarm Paint Protector
Cheap upgrade to not damage good paint on your swing arm with your restored 4mini bike. Protects the paint when you adjust the chain or change tyres. Also looks great and it's very well made with good detail and finish. A+ View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA Super Cub 50, HONDA SUPER CUB70, HONDA CHALY 50, HONDA DAX
Very best product at a very low price. ??
CUB was able to easily raise the Seat and open the fueling Cap. I like the design and size Polished. I am very happy with the design and size Polished. View detail
MINIMOTO fork emblem kit HONDA three-dimensional emblem highly recommended
When viewed from the back, there is a HONDA emblem on the seat, but when viewed from the front, there is no emblem, so I purchased this product as soon as I saw it.
To install this product, you will need to adjust the position of the Pure Soul.
The chrome Honda emblem seen from the front matches very well, almost like a genuine car.
It's rare as not many people have it yet. -------------------------------------------------- -------- From behind, there is a Honda emblem on the sheet, but I bought it immediately as soon as I saw this product because there was no emblem. To install this product, you need to adjust the location of genuine marriage. Chrome's Honda Emblem looks very good as a pure. There are still a lot of people installed, so there is scarcity. Powered by Google Translator
View detail
Measures to prevent hard to enter Neutral of Grom.
The Neutral on the Grom does not fit well, so I installed it to try it out.
I also exchanged the shift link at the same time, and what used to feel like a clunk every time I changed the shift, now goes in with a snap.
If we wanted, it would be better if the seals of the bearings were made of rubber seal (6902LLU) instead of gold (6902ZZ) to prevent rainwater intrusion.
I will use it for a while longer, and if the bearing is still stuck, I will replace only the bearing with one made by Rubber Seal.
View detail
Belt has no durability.
[How is it used?
I bought this for EngineO/H when Restore TZr50R.
I fixed the Flywheel with this product and removed the Crankshaft Nut and ClutchGEAR Nut.
Was the one you received as per Image?
The image was exactly as shown in the picture, and although there were several other manufacturers with similar pictures, Minimoto was the cheapest, so I selected Minimoto. I selected Minimoto because it was the cheapest price.
How was your experience with it?
The EngineO/H was successfully used and EngineO/H was successfully used.
However, Belt's durability was almost non-existent, and after a few uses, Belt's reddish coating was falling apart,
Although it can be used for a time, we worked with caution because shavings of the film could enter the Engine.
[Points to note]
When using it for engine O/H, the belt of the Flywheel side and the Holder must be degreased with parts cleaneretc. or it will not slide easily and cannot be fixed. Also, since the handle is short and it is difficult to apply the Torque, it is better to use a PVC pipe or similar to extend the length of the handle.
How did it compare to other products?
I have never used products from other manufacturers, but I have a feeling that the very cheap products sold on the Net are probably from the same supplier, so if you don't buy products from a proper manufacturer and price, you might as well buy Net products on the assumption that they will be crushed.
View detail
Fits: HONDA MONKEY, HONDA MONKEY
The direction of removal is ….
[How is it used?
SpiDer125 OEMCook is broken and is on Replace
Since it is not easy to find a cook for M12 female thread installation….
Was the one you received as per Image?
main idea
Was the installation difficult?
There is nothing difficult about it, but you need to be careful around fuel.
How was your experience with it?
Phi;8 is Overspecified for SpiDer125
[Included Parts:were they on?
Hose and Clip with I.D.Φ8, StrainerNet was included, which could not be installed as it is because the diameter of the end does not match!
[Was there anything that disappointed you?
The panelParts on the front of the Cook are not Screws but Rivet?
The SpiDerOEM is right, whereas the SpiDerOEM is left, so the Fuel Hose is a little more difficult to handle.
When the transparent hose is turned around at a steep angle, it breaks, so I use a hose with an inner diameter of Φ8 and an outer diameter of Φ8 with an inner diameter of Φ5.
View detail
Fits: HONDA GORILLA, HONDA MONKEY
MinimotoSPIIBracket installation
It can be installed securely, originally, the Frame Nut is used to install the OEMAir cleaner, so it is recommended to modify it with Tap. View detail
Fits: HONDA APE TypeD, HONDA APE 100 TypeD
really good
At first, I tried to buy another company's product.
But I was attracted to this product so I bought it.
It has really good cushioning for dirt roads.
You can drive really comfortably on bumpy roads.
I don’t envy Ohlins.
However, if you encounter a bumpy place in a deep corner, the balance is lost.
-------------------------------------------------- -------- At first I tried to buy another company product. But I bought this product. There is a really good cushion on the dirt road. Really comfortable driving on a bumpy road. I don't envy Olins. However, if you meet a bumpy place in a deep corner, you will be able to get a balance. Powered by Google Translator
View detail
For replacement of inside diameter!
I changed from a 16-pie to a 21-pie! The sound is better and it runs smoother. View detail
Batch!
It was installed on a DAX70.
I used to use my own Rubber packing to handle it.
I had been using this product for some time, but now I have installed this product.
Chain no longer interferes with Swing Arm
It is good.
View detail
Fits: HONDA MONKEY
3-pole coupler connector
Quality and texture information is no different from the std product It is compatible with Honda Std products for its usability You should have a wire stripper to buy together It's easy to install Buy based on cost performance and comparative brand preference with other products WeBike packaging is always great, arriving in a week for delivery and packaging Concerns, precautions, or advice on purchase If you connect the cable incorrectly, it is difficult to reunite There should be no failure from the beginning View detail
Fits: HONDA APE 100, HONDA APE 50, HONDA MONKEY, HONDA MONKEY, HONDA APE 100, HONDA BENLY50CD90, HONDA BENLY90 S, HONDA GORILLA, HONDA GORILLA, HONDA CUB-based Engine CL, HONDA CUB Engine CD
Fuel Cock M14
It is a product with good quality and texture information There is no difference in the feeling of use from the std products It's easy to install Cost performance and comparison with other products are cheaper than std products WeBike packaging is always great, arriving in a week for delivery and packaging Purchasing concerns, precautions, or advice The rubber packing may be damaged if tightened at too high torque. It should be tightened to meet specifications View detail
Diversion to GORILLA's Custom
Purchased for repair of GORILLA, same shape as OEM Product, made of plastic, but the plating is in good condition and the price is reasonable. View detail
Power Supply Branch
I wanted a 110 2-pole terminal for charging and connection.:I wondered if it was a good idea since it is a Set, but substitutions with other inexpensive items would have sufficed. View detail
correction of post (to a post)
I made a Screw Pitch mistake in the first Review, so I am correcting it.
KEIHIN's Slow Jet was M3.5×0.6.
The Slow Jet included is M4×0.7.
View detail
The product itself is good. However, it is partly different from the product description.
The carburetor itself has a good texture and can be used normally!
However, there is a difference from the product description.
I thought I had inadvertently over-tightened the 1st pc. and the Throw Screw Pitch was crushed, so I bought another one of the same carburetor and noticed that the Screw Pitch was different between the #35 that came with the DeFault and the #35 that came with the KEIHIN PC20 that I had on hand&. hellip;.
Perhaps the Slow Jet that came with it is M4×0.7 and KEIHIN's Slow Jet is M3.5×0.5.
However, the screw threads are shallow and the pitch is slightly different, so the screw threads on the body side are crushed when installing and removing for setting.
Incidentally, the product description states that KEIHIN-made jets can be installed.
Main jet was also Large sturdy in KEIHIN.
If you are purchasing, please be careful
View detail
Spec. change to match the hose
Oil cooler hose, changed banjo to make it a little thicker.
I made it thicker because I thought the higher the Oil flow rate, the better it would cool.
Normally, it seems that M6Type is often used, and we replaced it with M8Type in order to reduce losses as much as possible.
Anodized is also Beauty.
And it's cheap. So I ordered it right away.
Furthermore, there was a possibility of purchasing additional items the other day, so I checked the inventory and found that they were no longer carrying the product.
So, since there was no point in waiting for a product that wasn't there, I looked into it.
https://www.webike.net/sd/23865070/
If this is the next purchase in the same size of Silver, is this it? I thought, "If I buy this next time in the same size in Silver, it will be this one.
However, however, it seems that they have resumed handling the product.
Good, good.
View detail
Fits: HONDA GORILLA, HONDA DAX, HONDA MONKEY, HONDA CHALY 50
Recommended
Purchased to replace Camshaft Cover!
Not bad!
View detail
Cheap!
If you want to buy OEM, Type is enough!
I personally like it!
Handlebar bosses are not used because they are scary.
View detail
Recommended!
Cospa!
Somewhat BALI….
Considering the price, I guess.
View detail