Reviews
Back Mirror Fixing Section Protection
I have been using it to protect the back mirror fixing area and prevent rust, but it has deteriorated and will be replaced.
It hides the root of the fixed part and does not look bad.
I wish the selling price was a little lower.
View detail
Mirror was the easiest to see.
The texture is very good.
The mirror part of the Mirror is easy to see with color.
I've never bought Mirror other than Tanax, but I have no complaints.
View detail
Recommended for those who want to enjoy SportsCustom easily!
Due to an unforeseen trouble, we had to change the Mirror. Although it is an Adventure VST250SX, it is almost a Road model Mirror, and we wondered if there was anything that was light enough to be similar to an OFF model. We thought about it and came up with this one, which is lightweight with moderate cost performance.
It is a cheap model that is not a high-end aluminum line, and although it is quite light, it is not so poor as the OFF series, which is too weak and makes the view worse due to vibration, The mirror surface is closer to the wide side, so there is no deterioration in visibility itself.
This RidgeMirror has an Others LayerMirror (NA-002R) ProtectMirror (NA-003) It seems that there is a sibling who is the most aerodynamic in terms of design (...) as if it were the most aerodynamic. (^^) (I like it better than any of the others because of its shape.
View detail
Best product!
I ride a current Z400.
Before installing this product, I could not even tell if there was a vehicle behind me, but after installation, I can see it differently and I am satisfied with Large.
If the price were a little lower, it would be a perfect score.
View detail
relief from a worry
I bought this for my CT125 because the LeftMirror is in a strange place and it was hard to see the back of the car.
I am happy with this Parts and it is much easier to see.
I was torn between 30mm and 45mm, but the 45mm is just right.
View detail
Very good.
I had been wearing a cheap Mirror that I bought from an auction, but it was hard to see and the design was too ugly for its large size, so I bought this one with a modern design. I think it depends on the position of the Mirror rather than its large size. It is easy to adjust, I like the design, it looks good, and it is a good price. I think the Mirror is a great product from TANUX. View detail
Amazing built quality.
The workmanship for this mirror is marvelous. Would be better if rubber bushing is included in the package so it would help to minimise the vibration that is being sent to the mirror when travelling at higher speed. Clarity would be compromised with the Speed above 100km/hr. View detail
Long time favorite
I have been using this product since 1998 v-max. The OEM is round, but I personally prefer the rectangular shape and the visibility is excellent. View detail
Expensive but satisfactory
The shape of the mirror and the mirror surface reflected in the Violet give it a sense of luxury. The price is high, but it is a satisfactory product. Incidentally, this Mirror is sold by piece.:Pair (for Left and Right) Two of them must be purchased when attaching to the View detail
It was a little short!
After installing Extension India on PCX, Mirror and Extension India interfered with each other, so I bought this as a countermeasure. I had no choice but to adjust it by shifting the Extension India, but the interference could not be improved, so I decided to ride it as it is. I will buy OffsetHolder45 later. View detail
TANAX OFFSET HOLDER 45
125 years old, 125 years old, 125 years old.
I want to know more about this.
I bought the genuine Monkey 125 side mirror because I couldn't see the rear clearly.
After installing the offset holder, the mirror viewing angle will be good, allowing you to see what's behind you and drive safely. -------------------------------------------------- -------- The side mirror of the genuine Monkey 125 was purchased because it could not show the rear. After installing the offset holder, the mirror viewing angle is good, so you can show the rear so you can drive safely Powered by Google Translator
View detail
TANAX M10 Mirror Bolt Caps
125 years old, 125 years old, 125 years old.
I want to know more about this.
I bought the genuine Monkey 125 side mirror because I couldn't see the rear clearly.
After installing the offset holder, the mirror viewing angle will be good, allowing you to see what's behind you and drive safely. -------------------------------------------------- -------- The side mirror of the genuine Monkey 125 was purchased because it could not show the rear. After installing the offset holder, the mirror viewing angle is good, so you can show the rear so you can drive safely Powered by Google Translator
View detail
For those who want to increase visibility...
It has been on since I bought it and I was going to replace it as soon as I could, but it looks relatively good, has good visibility because it is MirrorLarge, and depending on how you mount it, it doesn't stick out more than a handlebar. ????? So I'm using it as it is. View detail
Fairly easy to see.
Replaced OEM Mirror due to damage.
Installation is easy but not a little cumbersome.
I think the range of visibility will be that much greater.
Mirror's appearance hasn't changed much.
View detail
I generally like it, but...
CT125 OEMMirror is hard to see, so I replaced it, and it looks Wide with R800 (note the distance!). No blurring due to vibration.Quantity:Pair (for Left and Right) The overhang of the "L" is less than OEM. The Lock nutCap at the root is Large tight & loose. I don't like the silver color part which is the accent when viewed from the front, so I hid it with a Round Type Seal (5cm diameter). View detail
Ninja1000 Cowl mirror→Best fit for Handle mirror conversion
[How is it used?
Used to replace OEMCowl mirror with Handle mirror
Was the one you received as per Image?
This is my second purchase of Right Side and I like the design.
How was your experience with it?
The first Mirror had lost its knob and I had no choice but to replace it, and the Repeat product also has a soft moving part that makes me a little uneasy.
[Points to note]
If the moving parts become loose, send them back to the manufacturer to have them adjusted.
How did it compare to other products?
I can't find anything else that I like, so this is my only choice.
[Opinions and requests to Manufacturer
Loosening of moving parts, please improve
View detail
Back MirrorImproved rearward visibility
The rearward visibility of the Grom OEM Mirror was poor (about 1/3 of the arm was reflected) and I had to retract my arm every time I checked the rearward view.
When we tried to install it as it was, it interfered with the Throttle Wire, so we had to loosen the nut that secures the Wire and adjust the angle.
The installation has improved the reflection of the arms considerably, though not completely.
View detail
Tanax Cross 2 Mirror
Delivery was fast. It was packaged meticulously to ensure no damage. I am always satisfied with WeBike's packaging.
I installed it on the VTR250 and it gives it a retro feel. The quality of mirrors is different from those made in China.
Rear visibility is better compared to the stock mirror. I recommend it. -------------------------------------------------- -------- Delivery was fast. The packaging has come so that there is no meticulous damage. We are always satisfied with the packaging of Webike. It was installed at the VTR250, but the retro feeling is alive. The quality of the mirror is different from the Chinese mountain. The rear view is better in preparation for genuine mirrors. I recommend it. Powered by Google Translator
View detail
quintessential old shopkeeper
No problems at all with the texture and feel.
I marveled at the quintessential Mr. Tanax, who has been making them for decades!
I have installed this Mirror on my GB350, and before this Mirror, I had installed the one from an unfamiliar manufacturer and the one from a well-known manufacturer.
Loose immediately, Motorcycle left for a week to loosen….
Design, it was a problem before texture
It's just … wild!
It's kind of fat all around.
I wish it were thinner, though, as it might cause loosening or blurring.
Well, I don't mind once it's running.
View detail
I need to buy two
Quality and texture information The paint finish is clean and good It certainly looks good on the sense of use Product to Buy Together Product # BCM-10 Installation difficulty easy Perfect for cost performance and comparison monkey 125 WeBike packaging is always great, arriving in a week for delivery and packaging Advice Since the screw is in the forward direction, it should be installed after checking carefully If you install it incorrectly, the screw line may be disrupted and the package configuration is composed of one, so please buy two and save time and money Many people buy only one View detail