Reviews
![Chain Cover TYPE-C [Custom]](https://img.webike-cdn.net/catalogue/images/27358/photo_cb1300sf_85l_TS.jpg)
self-satisfaction
It is only a self-serving product, but even those who don't customize much will be satisfied with it.
If the price were lower, it would be even better.
View detail
Fits: KAWASAKI W800, KAWASAKI W800 STREET, KAWASAKI W800 CAFE
I was able to install it in a short time with no problems.
Since it is an OEM Product, of course it arrived without any problems.
I think the dress-up effect is high.
Originally Plastic for lightness.
This kind of NeoClassic Bike is for people who want to be obsessed with it.
I'm not sure about Plastic since I think Motorcycle.
If you are looking for a visual effect, not a performance one, I recommend it!
View detail
Easy installation
Simply remove the OEM Chain Cover and install with the included Bolt to enhance the quality. View detail
Fits: HONDA SportsCUBC110/C111, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA SUPER CUB110
Cost performance ◎
I installed this on my 13 CROSS CUB (JA10). It is good quality for the price, and lightweight. It works well without the defect of not covering the top of the Chain that was mentioned in other postings. It looks Sporty and the Chain area is Refreshing. It is a Recommendation for easy Custom. View detail
Fits: SUZUKI HAYABUSA, SUZUKI GSX1300R, SUZUKI GSX1300R
It looks great!
As the Title says, it looks great. It doesn't stand out, but when you notice it, you can't help but notice it. "Oh, great." It is even more so because NORMAL is a cheap plastic. View detail
Very high quality
Very high quality, easy to install,arrived earlier than expected, very satisfied Exquisite packaging to avoid damage. View detail
Fits: HONDA SportsCUBC110/C111, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA SUPER CUB110
around this time an article was sent to me
The delivery was delayed during Corona, but I received an apology email from the person in charge and was grateful for the Large change.
As others have mentioned, the original Chain Cover Bolt is too short for installation.
6×10 Bolt and Washer are required.
View detail
Fits: HONDA SportsCUBC110/C111, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA SUPER CUB110
Is it an individual difference? Definitely needs a separate screw
For weight reduction and dress-up.
Required Tools
10mmSocket
M6×10Screw (Pitch 1.0? site check required)
Some people seem to be able to use OEMBolt, but I couldn't. It broke.
This Parts is fixed with 2 Bolts (Driven and Drive side)
I initially tried to use Bolt and temporarily tightened the Driven side by hand and then hand-tightened the Drive side.
Then the screw on the Driven side blew out.
Upon checking, the Screw hole on the Driven side was slightly licked.
When the Bolt is aligned with the Parts, the OEMBolt is only long enough to have two Screw threads protruding, and the Screw threads seem to have lost shear stress.
I bought Bolt at Home center and used it on the Driven side.
The successful attachment method is Drive (OEM) →Driven (Homsen) The order is tentatively assembled and tightened in this order.
After several attempts, the Drive side also licked the Screw hole a bit, so I should have used the Homsen Bolt from the beginning.
As Chain Cover, it does not cover the Chain.
Perhaps my individual is deformed on the outside.
If it is divided into dress-up and lightweight, I think it is cosmetically pleasing.
View detail
Quality is on par with OEM
What made you decide to buy?
This year is Speed La's year, and I was surprised by the quality of Speed La's products, which I found out by purchasing Speed La's Dry carbon products, and I am really captivated by Speed La's products. (Lol) Following the Rear Fender and the Exhaust Cover, I also bought the Chain Guard, which I had been interested in for a long time, because it was on sale at the end of the year. (Since Speedra's Dry carbon is made by Handmade, it seems that once the stock runs out, it will take a long time for the next delivery. Owners who are thinking of purchasing it are advised to purchase it while it is still in stock).
How was your experience with it?
The material is dry carbon, which is also used in aircraft, making it stronger and lighter than the OEM Chain Guard. Dry carbon is completely different from conventional wet carbon, and is produced using the latest carbon processing technology, boasting ultra-light weight and ultra-strength. It is used in Sue Parka, F1, MotoGP, etc. (It's also used for high Motorcycle)
All Speedra products purchased this year. Twill weave/glossy is. All Instruction Manuals include All of our dry carbon products are handmade and finished. Slight variations and errors may occur." However, all the parts we purchased this year were as good as OEM and we could feel the craftsmanship of the craftsmen. All of Speedra's dry carbon products, both matte and glossy, are UV-cut, so they can withstand UV rays, which is a weak point of carbon, and can be used without worry.
Installation
In order to replace the chain guard, the footpeg was removed because there is a bolt on the reverse side of the footpeg. Also, there is a clip on the reverse side of the swing arm, so don't forget it! I think it takes about 10 minutes. I thought it would be easier to replace the Fender with the Bolt removed, so I left it off. Incidentally, the removed bolt is coated with Screw lock. It is troublesome but I removed the old Screw lock agent by Dice and applied a small amount of new Screw lock agent to complete the work.
View detail
High contribution to appearance improvement.
As others have mentioned, the OEM Chain Cover is a very cheap matte resin and is not even close to the quality of the product.
Therefore, especially if you are replacing Fender and side covers with Magical's Carbon, this is also a must.
The rear wheel can be replaced by removing the rear fender without having to remove the rear wheel, since both hand and tools are accessible.
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
สวยถูกใจแอบซิ่งแบบงานละเอียด View detail
Fits: KAWASAKI Z750 (air-cooled), KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z750 (air-cooled), KAWASAKI Z750FX, KAWASAKI Z1000 MkII, KAWASAKI Z900 (KZ900), KAWASAKI Z1000, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z750FX, KAWASAKI Z1000 MkII, KAWASAKI Z900 (KZ900), KAWASAKI Z1000, KAWASAKI Z1-R/Z1-RII
Perfect fit and look for my 78 D1 restoration project
The Doremi Collection Chain case product #60037 was a perfect fit for my project. The installation was super EZ and the look was OEM just what I was looking for. The product arrived wrapped in bubble wrap with not a scratch on it. Keep up the good work Doremi and thank you WEBIKE Japan for making my transaction seamless. Regards, D. Chisholm, Colorado USA View detail
Good
[How is it used?
The Chain Cover was out of date.
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
Just remove and attach.
OEM's faded black has been replaced by a cool carbon
The appearance has been Upgrading.
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
ornamental plant used primarily for the visual effect of its fruit
I didn't pad it when I saw it in Catalogue, but I happened to know someone who was wearing it, and when I saw it in person, I fell in love at first sight. View detail
good-looking
When I saw it in Catalogue, I was not so impressed, but when I happened to see an acquaintance wearing it, I fell in love at first sight. View detail
Stylish
I was almost done with my planned Custom and was looking for other Custom that I could do and found this.
I had a hard time removing the OEM case because it was screwed on, but installation was easy even for an amateur as long as I followed the instruction manual. It is not so effective in terms of functionality, but I am satisfied with it because it is a world of self-indulgence. It's a bit cosmetic???
View detail
Everyone likes LargeCarbon parts
The surface is [Color] ClearGel coat
Urethane for weather resistance to ultraviolet rays [Color] Apply Clear, etc.
I am substituting by Rear's Coat.
It is carefully made and includes Sticker and others in Included Parts:.
Rear tire must be removed or shifted for installation.
If it is too much for you to handle, ask Shop.
View detail
Carbon
More concerned with appearance than OEM. I wish the overall design was a little better Parenthesis. View detail
MagicalRacing ChainGuard
We took the opportunity to exchange the Chain for a NORMAL Chain Guard.
The quality is solid, as the company is a long-established leader in carbon parts.
Material:Just by replacing the plastic Chain Guard, the Rear area will be much tighter.
Replacement is quite easy, but it may be better to ask a Motorcycle shop to do it because it is difficult to access the tool when the bolt that holds it in place has a Tire on it.
The order was placed through WeBigOrder. They ship it securely packaged and wrapped in Cushion, so I didn't have to worry about it getting damaged in transit!
View detail
Stylish
I was looking for a Chain Cover that fits my needs. The moment I found this one, I snapped it up.
There is no color line nap, but I think the design fits any Swing Arm. I like it very much.
View detail