Reviews
Fits: YAMAHA DRAGSTAR400
thick-sounding
There is a slanted plate inside, basically Straight Pipe Type
It's bombastic and loud, but not incredibly loud.
Torque becomes thinner.
View detail
Fits: BMW R nineT, BMW R nineT Pure, BMW R nineT Racer, BMW R nineT Scrambler, BMW R nineT Urban G, BMW R nineT Urban S
Weight saving
The volume is quite normal, just enough to contribute to weight reduction.
Installation is easy even for beginners with tools.
View detail
Fits: HONDA MONKEY, HONDA GORILLA (12V) Z50J-2000001-, HONDA GORILLA (12V) AB27-1000001-, HONDA MONKEY(12V) Z50J-2000001-, HONDA MONKEY(12V) AB27-1000001-, HONDA GORILLA2.6PS(6V), HONDA GORILLA3.1PS(6V), HONDA MONKEY2.6PS(6V), HONDA MONKEY3.1PS(6V)
Sound is Large
Personally, I was expecting the sound to be a bit louder than the NORMAL, but there was not much change. If you live in a residential area, it may be just right.
Also, please note that the NORMAL exhaust guard will attach to the silencer part, but not the other parts (there is no bolt on the exhaust system side to attach it). I like the Forme without the Exhaust Guard, so I have no problem with it.
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
The packaging was very good, but ...
The packaging was careful and secure. but some rust was visible. A little bit.
So I applied a little rust remover and it worked fine.
It needed a little work, but performance and other things don't seem to be a problem.
We feel this is a good product for those who are particular about Normal look.
View detail
Maybe a little long.
I bought a used Exhaust System and used this one as a joint.
I think that the Exhaust System, which I personally wanted to use, would have been nice if the tube length was a little shorter. (Well, I'll process it.)
Also, if the OEM exhaust pipes have been used for a long time, the joints of the exhaust pipes are rusted and will not stick, so it is necessary to remove the rust once and for all.
Also, the dimensions themselves are assembled Tight, so it will take a lot of effort to match the Pitch re as shown in the image.
If possible, it would have been nice if the width of the Exhaust System side was a little narrower...
View detail
I like the sound and the look, but the mounting position doesn't fit.
Even with Idling, you will notice a change in sound. The appearance is also better than Earls Gear in terms of parenthesis. (A matter of taste) The price is cheap. However, the mounting position just doesn't fit. I spent a lot of time trying to get it to fit in the correct position, but I gave up. I think it is not a problem of how to assemble it, but I installed it with the exhaust flange and silencer in the proper position and allowed for the gap at the exhaust system fixing part under the car body. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE
Japanese Vehicle Inspection Correspondence
Japanese Vehicle Inspection Correspondence allows you to run without worry.
I am satisfied with the improved appearance and Parenthesis.
View detail
Fits: HONDA Dio ZX (Dio), HONDA Dio SR (Dio), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA Sh mode (MODE), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PCX150 <ABS>., HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX Special Edition, YAMAHA Vino (VINO), YAMAHA Zr SUPER JOG (SUPER JOG), HONDA GROM
NTB Gasket
I was looking for an inexpensive Exhaust Gasket and saw this and bought it. View detail
I am convinced because of the reasonable price.
It's inexpensive and not very effective at muffling sound.
I am satisfied with the quality as it is made by a well-known manufacturer.
View detail
Light, SMART!
Since it is an off-road vehicle, we selected this one for its weight and SMART appearance.
Satisfied with the fit and the lightweight feel of the ride.
As for the exhaust noise.
I'd heard about it on Net, etc. beforehand, so it was to be expected.
A little dissatisfied with the sound quality.
Also, when half of the Axel is empty, it sounds large.
The Torque feel and Power curve are fine.
It is easy to ride without stalling even at very low rpm.
I've also tried fitting the Inner baffle, sold separately.
I couldn't get it to blow at high rpm anymore.
I immediately returned to the original Baffle.
by the way
Air cleaner modification, Element low resistance
Impressions of the installation in SP Tadao PowerBox condition.
View detail
Purchased because I wanted to make the Exhaust System sound smaller.
I felt that the sound of the replaced Exhaust System was a little too Large, so I wrapped it around the inside Baffle.
The attached needle Gold felt short.
Perhaps the winding was not done properly, but the exhaust pressure caused the Glass Wool inside to pop out through a narrow gap in the Baffle's mounting.
Did I put the wrong front and back on? I thought so and put a new one on the opposite side, but the same thing happened.
Not enough windings? The sound did not drop that much, but the effect is not entirely absent.
I don't think there were any instructions on how to install it.
We'll see how it goes for now.
I haven't run 50 km since then, but the Glass Wool stopped coming out of the inside, so I looked inside and the Glass Wool is thinner than the amount that came out. (Lol)
It didn't seem to have much durability. (It could be because of the way I wind it.)
I have never used Glass Wool from other manufacturers, so I have no idea if this product is bad or if Glass Wool itself is like this, but I will try to use a different manufacturer's product next time I buy one.
View detail
Fits: KAWASAKI KLX110 D All models, KAWASAKI KLX110 L LX110A All models, KAWASAKI KLX110 All models, KAWASAKI KSR110 KL110A All models, KAWASAKI Z125-PRO BR125H
It works fine
When replacing the Exhaust System, don't be stingy and use a new one!
It's going to leak exhaust.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR
test Sonehara
test Sonehara View detail
Appearance is quite good touch. However, since exhaust leakage is worrisome, an liquid gasket is required. In addition, the silencer was short than expected. If ? baffle is removed to the extent that it will not change that it is so pure, if s
Appearance is quite good touch.
However, since exhaust leakage is worrisome, an liquid gasket is required.
In addition, the silencer was short than expected.
If ? baffle is removed to the extent that it will not change that it is so pure, if sound is attached [ the baffle ] ... It is pleasant.
But it may be slightly a nuisance to the neighbors.
View detail
SS300 carbon muffler is attached and it becomes in one month. There is also no change of the sound by heat, and since a sound is also near almost pure, the run has also been satisfied considerably! A baffle can also be removed. if it removes, the
SS300 carbon muffler is attached and it becomes in one month.
There is also no change of the sound by heat, and since a sound is also near almost pure, the run has also been satisfied considerably! A baffle can also be removed.
if it removes, the fragrant sound is waiting -- * -- at least it is changeful.
We can recommend an explosive-sound-roaring group, a pure group, and both to you.
however, a muffler -- middle -- since a connector, there is some exhaust leakage.
The direction to worry recommends you the purchase of an liquid gasket.
This knot and a fruit are convenient at the time of a tire change.
It is not necessary to remove a muffler by a way.
Incidentally, since the fixed spring of a connector is iron, it rusts.
Cautions are required.
View detail
SS300 carbon muffler is attached and it becomes in one month. There is also no change of the sound by heat, and since a sound is also near almost pure, it is considerably satisfied! A baffle can also be removed. if it removes, the fragrant sound i
SS300 carbon muffler is attached and it becomes in one month.
There is also no change of the sound by heat, and since a sound is also near almost pure, it is considerably satisfied! A baffle can also be removed.
if it removes, the fragrant sound is waiting -- * -- at least it is changeful.
We can recommend an explosive-sound-roaring group, a pure group, and both to you.
however, a muffler -- middle -- since a connector, there is some exhaust leakage.
The direction to worry recommends you the purchase of an liquid gasket.
This knot and a fruit are convenient at the time of a tire change.
It is not necessary to remove a muffler by a way.
Incidentally, since the fixed spring of a connector is iron, it rusts.
Cautions are required.
View detail
I recommend to the exchange from normal. I think that it is thought that a power down is exchange from a slip-on or full exhaust. Since he likes a design from the first, regret is not carried out, but it is the engine performance equivalent to nor
I recommend to the exchange from normal.
I think that it is thought that a power down is exchange from a slip-on or full exhaust.
Since he likes a design from the first, regret is not carried out, but it is the engine performance equivalent to normal.
View detail
Fits: HONDA dachshund, HONDA dachshund, HONDA Dax 70, HONDA Dax 70
For Export?
Is it for Ez? It cannot be installed on FOR JAPAN MODEL ones with round holes. (If it has a grid like the one in the photo, it may be OK.) View detail
Here's an impresario on the old Exhaust System!
[How is it used?
It was used for diversion to CUB type Exhaust System.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
It was a replacement for NORMAL, so there was no problem.
How was your experience with it?
Exhaust pipes are thin, but the volume is on the large side.
The construction is well made, including the Bracket.
[Included Parts:were they on?
Comes with Bracketetc.
[Was there anything that disappointed you?
There was no good functionality because of the lack of out of the box.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Not available in Korea
I bought it with difficulty because I liked the sound of moriwaki. It cost about 700,000 won, including shipping and customs, but it is illegal to install it in Grom in Korea. 700,000 won has evaporated. My heart aches so much. View detail