Reviews
I've been waiting over 6 months for this...
I am a New Model KATANA rider. 。 Ordered in spring, delivery delayed…. Delay…. Also delayed…. It finally arrived at the end of the year.
Now, assemble it ? But the middle of the three mounting points don't fit together. 。 I managed to attach the Right Side by enlarging the holes in the bracket to the limit, but the Left Side is not attached at all. 。 Bracket is attached to a ton of places. 。 In the end, the Firmly fixed Bracket was scraped off and the Bracket was remade and fixed and finally installed.
I heard from fellow KATANA members that A-TECH products are no good? so I wasn't too surprised.
If I returned the product with an Objection, I did not feel like making an Objection because I thought I would have to wait another year to receive the product again.
Anyway, it seems that A-TECH's Carbon parts have many Objections.
Those who order should be prepared to order.
View detail
Effective against heat
Purchased for heat protection.
Material:I thought it would not be a perfect Fit since it is a Carbon product, but it is perfect except for the footpeg area.
It also blocks heat and is comfortable in the summer.
View detail
Used as Oil receiver for Circuit run
I installed it on my Ninja 250SL that I ride for Circuit Racing.
Since it is a dedicated product, it can be basically simply installed, but there may be some interference depending on the exhaust system being used.
I had OEM Exhaust System and YOSHIMURA Slip-on Silencer, but there was a little bit of shaving part.
View detail
Increased sense of luxury
The color of the Stainless Steel matches the color of the car body, giving it a more luxurious look. View detail
Fits: KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11
I love it so much!
That's a very narrow view compared to OEMs. But it's not worth comparing them. Anyway, Cool.
By the way, the complaints are that it is hard to see compared to OEM, the price is high, and it took a long time to deliver. The complaints are that it is hard to see compared to OEMs, the price is high, and the delivery time was long.
View detail
Quality is good, but accuracy is subtle.
The quality of the carbon itself is fine, but the accuracy of both SIDES is not so good. The tank cover itself is difficult to install, because it is made in the shape of the tank cover, and the gap is inevitably caused by the thickness of the double-sided tape. Well, I think every manufacturer has this kind of accuracy.
Tolerable.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Fairly reasonable price
GSX1300R GSX1300R HAYABUSA Installed on a 1999 model
I don't know what the impact is, but the price of carbon parts from various companies has skyrocketed. (or rather, no longer rampant). In the midst of this trend, the Carbon rear fender can be purchased at a price that is sensibly comparable to conventional fenders.
I don't know if the price is actually going up or not because I don't follow the market.
Design is as you see it.
It covers the rear tire as a rear fender and also covers the drive chain.
There is no problem in terms of accuracy, and if you are not particular about it, it can be ponned as it is.
Personally, I didn't want to damage the Swing Arm, so I put Sponge on the contact surface. I felt guilty about tightening the Carbon directly with the Bolt, so I enlarged the Bolt hole to M8 and installed it by floating it with an M8→M6 conversion collar and RubberWasher, I installed the bolt with some minor modifications.
Functionally, I do not know because I have not yet driven in the rain, but as a Fender, the width is narrow and the antifouling function is a little unsatisfactory.
However, the appearance is SMART for that reason.
The GSX1300R HAYABUSA does not have a Rear Fender in OEM condition, so the Rear view is uncomfortable, especially when the Exhaust System is changed to Single Silencer.
In addition, the difference in texture between the adjacent chain cover and the resin is a concern with many carbon rear fenders, but this product can also serve as a chain cover with just one fender.
So, it is an excellent looking custom product.
The Neck is a Tie Wrap fixation, but there are no screw holes that can be used to fix the Tie Wrap in the first place, so that point is unavoidable.
This was also the first time for me to purchase A-TECH carbon parts, and I was not disappointed with the quality of the carbon.
I think the quality is on the high side, as even Brand products from well-known places can be disappointing.
Although you will probably have to wait for a certain period of time after ordering because it is made-to-order, you should first be thankful that they still lineup custom parts for motorcycles that have been on the market for almost 25 years.
And the price is relatively reasonable. (This is only based on recent trends.)
I can fully recommend this product to others.
View detail
It takes quite a while to reach the..,
I had heard rumors that they are a manufacturer with a long delivery time, but I wonder how they are doing as a manufacturer in this day and age if it really takes this long. It is not like electronic parts.
As a result, satisfied with the product.
Outside of supported model year (2BL-PC40) Screws can also be fixed to the limit. However, there is some interference with Cowl and Rear Sets. (Exactly with no Clearance) 。
View detail
The finish is as good as I expected.
The finish is as good as I expected. The H2 model is popular in Korea. There's a lot of interest in undercolls. I'm also using a-tech products I have placed an order. The overall packaging of the cowl is well done, and the clear layer is also good. The carbon pattern is also well expressed. It will be installed after PPF film construction. Thank you. View detail
For Dress-up
I don't race or anything, but it looked cool, so I put it on.
Since we did not feel the need to use carbon, we chose FRP, and the weight was about 650g.
There were some nests and wrinkles, but they were not exposed, so they were painted with Urethane Matte Black.
When I purchased the company's Under Cowl for 10R in the past, I was careful to handle it with Pe LePera, but this product has many rib-shaped folds and lines with the same thickness, which gives it a rigid and solid impression.
The 10R was not shaped in line with the frame and was prone to cracking, but this product is shaped to fit the cowl and frame firmly, which is a good thing.
The fit is good, but the hole for the well nut was gapped by half a child, so I corrected it with File.
The Cowl is covered from the front edge to the rear tire, which may have a rectifying effect.
The Rear Suspension Link area, which was hidden by the lunch box due to the installation of the Full Exhaust System, is now exposed, and since the engine area is also covered, it is likely to have an anti-fouling effect.
The thermal barrier Tape that comes with the product has a minimal area, so it is better to purchase an additional one.
A little more volume at the rear end would have been better.
View detail
Swing Arm Protection
It doubles as a Stand Hook and Slider.
A light fall will provide protection.
Large falls make the bosses flinch.
That's right
Because it is easy to use.
I would like to modify the mounting Bolt.
Installation is a cinch, as only Screws are required.
View detail
It's not quite Exactly.
It seems to be handmade, so it's not exactly Exactly.
I think Cool.
I was worried about the double-sided tape alone, so I dotted Coking on an inconspicuous spot on the edge and installed it.
I don't feel out of place when I go Touring.
View detail
Good looking design!
The adhesive is strong enough and does not peel off at all! The design looks great and is applied to my NotebookPC! View detail
The netting is too soft and difficult to replace.
The netting is soft, so when the bolt is tightened, it flattens and is not parallel to the bolt. View detail
Carbon Kevlar stands out
From a distance, the shape is similar to the OEM Injection cover, but of course the details are slightly different. These parts have a handmade feel.
Mounting accuracy is perfect. No additional machining, etc. was required.
The glaringly glaring effect of Carbon Kevlar stands out in any case. The custom effect is also large parts for color purposes. It may be a matter of taste.
Personally, I liked the Large change.
View detail
The Parenthesis quality is further enhanced by replacing the Front and Rear Set.
[How is it used?
KSR-II Front Fender. A-TECHFront FenderSPL I wanted to install an inner rear fender after replacing the fender with an A-TECH fender, so I purchased the same A-TECH product to balance the design.
Was the one you received as per Image?
Parenthesis is good as well as Down fender for Front!
I chose Plain Weave Carbon for the Rear to match the Front, and I was so satisfied with the Large product that I drooled over its parenthesis and its image.
Was the installation difficult?
It is less difficult than the Front Fender, and can be installed by a Large-size person by referring to the included Instruction Manual for installation.
How was your experience with it?
To be honest, this is a component that was not originally included in the OEM. Parts I wouldn't be without." I think it will reduce the amount of mud and other debris that bounces off the Tire when it rains (I haven't driven in the rain, so I'm just guessing...) As I've mentioned above. Custom parts that improve the appearance of the parenthesis. It is
[Included Parts:were they on?
Rear FenderBody, Bolt and Tie Band for fixing, and Instruction Manual for installation are included.
[Was there anything that disappointed you?
None at all! It's on the back of the Fender. Black diamond I couldn't stop grinning until I took the Rear Fender out of the box, attached it to the car body, and looked at it from a bird's eye view.
Other items that would be helpful
Point and hang of installation
There is nothing difficult about it. Just follow the basic installation instructions as described in the Instruction Manual for installation and your custom is complete.
[Availability and clarity of the Instruction Manual
As mentioned above, an instruction manual for installation with illustrations is included in the package, so please read it carefully before installation.
[Notes]
There is nothing in particular, but handling with force may cause deformation or cracking, so handle with care.
[ITEMS TO BUY TOGETHER
The Parenthesis quality is enhanced to the extent that it is annoying when the Front Fender is also unified with the same material of the company.
If you can, buy the front and back Fenders at once.
[Opinions and requests to Manufacturer
Please continue to sell them as much as possible, as they are valuable custom parts for KSR-II, which has few exterior custom parts.
View detail
Just plain Cool.
[How is it used?
When I was searching for aftermarket parts on Webike to install a down fender to refresh my KSR-II that I have owned for many years, I found this product and bought it on the spur of the moment because it was on sale at Timing. I found this product at Webike when I was searching for aftermarket parts.
Was the one you received as per Image?
I purchased Plain Weave Carbon, the cheapest in the series, but it was still cool enough!
It looks like a racing machine even though it is a motorcycle used only for street riding (though it is only the owner's prejudice), so it is unbalanced against the cute KSR, but still, cool is justice.
Was the installation difficult?
The NORMAL model is an Up Fender, so to install a Down Fender, use the Attachment included with this product, but it is a bit of a puzzle, so check the illustration in the Instruction Manual before assembling it temporarily.
How was your experience with it?
I don't feel any change in functional parts in daily use. If I drive at 160km/h or more, I think I can feel the difference in straight line stability etc. from Up Fender, but I don't have such performance, so I can't experience it.
Also, Fender itself is larger than NORMAL, so no matter how lightweight the Material:There will be little to no weight difference in carbon (and it is not made of Dry carbon).
It just looks cool!
[Included Parts:were they on?
Attachment that fixes FenderBody and Down fender is Quantity:Pair (for Left and Right) 1Quantity in:Set, with accompanying Bolt for fixation included.
[Was there anything that disappointed you?
Not at all.
Luxury. Twill Weave Carbon Ya Carbon Kevlar There are higher-end products made in Japan, but they are also priced higher, so you will have to consult with your Wallet.
Other items that would be helpful
Point and hang of installation
Quantity of Attachment for Down fender:Pair (for Left and Right) It was difficult to understand the "1" in the installation instruction manual, but if you look carefully at the illustration in the instruction manual, you will be able to understand it, so I think you will have no problem installing it if you do a temporary assembly after confirming it before final fixing.
[Availability and clarity of the Instruction Manual
An illustrated Instruction Manual is included in the package, so if you are not confident, please read through it carefully before starting work.
[Notes]
If left exposed to sunlight for a long period of time, the UV rays, etc., will cause deterioration and sometimes the Clear layer on the surface will peel off (have you ever seen a vehicle with CarbonBonnet installed that has an unfortunate surface?) (Have you ever seen a vehicle with CarbonBonnet that has a disappointing surface?
When not riding, protect them from UV rays with UVCut Body cover or Garage storage, and give them moderate care.
[ITEMS TO BUY TOGETHER
If you purchase the Rear Fender with the same momentum, you may further enhance the Parenthesis quality.
[Opinions and requests to Manufacturer
This may not be the best selling product because of the vehicle, but we would appreciate continued sales whenever possible.
View detail
Material:What is the quality of FRP products?
I purchased the Under Cowl Tray for my ZX-10R and it arrived today!
When I opened the item, I saw a long scratch ・・・・・ and the uncolored part looked like a scratch.
Even assuming painting, I think it will inevitably look different in areas where light passes through and where it doesn't, but Material:What is the quality of FRP products like?
I'm a little disappointed.
View detail
So so
Was the one you received as per Image? Yes
Was the installation difficult? So so
How was your experience with it? Good
[Included Parts:were they on? Yes
[Was there anything that disappointed you? Mounting holes are not precise enough.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Not good
Was the one you received as per Image? Looks like a zero.
Was the installation difficult? Processing is required. Level that needs to be re-drilled for screw holes.
How was your experience with it? Good
[Included Parts:were they on? Yes
[Was there anything that disappointed you?
Installation system is not very good. Requires drilling of screw holes, etc. Drill and Leutor required.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail