Reviews
Power Filter Adapter for Yoshimura YD-MJN24 [24mm]
Although it may be a dedicated part, it would be nice if it were a little cheaper.
I don't have any problem with the parts, and if I may say so, if it is a dedicated carburetor, I don't think the price is too expensive if it is the same color as the carburetor.
View detail
Fits: HONDA MONKEY, HONDA GORILLA
I'm ready to step up to the plate.
When I changed Rear to Other Brand Product, I was worried about the weakness of Front, so I introduced this one.
Compared to OEM, I think it has a little more tread to it.
View detail
Fits: HONDA SUPER CUB 90, HONDA SUPER CUB 70, HONDA SUPER CUB 50
For CUB's CampingTwoCustom
It has a Loader Hook, and you can pack it with a loading net and rubber ties.
It is more convenient than the Basket because you can load more freely.
Be careful not to overload the Handlebar as it will make the Handlebar operation heavier and may pop out when you turn off the Handlebar.
View detail
Fits: HONDA MONKEY, HONDA GORILLA
Large satisfaction with excellent stability
Normal look is what I'm obsessed with, but for the 88cc engine, it's Normal The fork is still unstable
I found this product when I was looking for reinforced parts for driving stability
How did you feel after the exchange? "Outstanding stability It was
I'm really happy with the enhancements without ruining the look I chose the OEM Length, but I also have a choice of lengths, so I stuck with the Normal look I really recommend it to anyone who is
Spring replaced it himself, but I'll review the work
You can find out how to exchange it on the Net
MONKEY OEMFront Fork Spring Replacement
You can check a lot of things by searching for
We recommend replacing the following parts at the same time, as they are almost all Rose The part number is the OEM product number
Quantity:2pc. Each set is required
?ForkGuide (Part #:51502-045-670)
Dust Seal (Part #:51503-165-003)
PistonSlide pipe (Part #:51507-098-000)
?PinSpring (51526-098-000)
? , ? is Quantity:This is the one in the 1pc. eye photo
I bought these two at the same time as Spring
However, in the process of roasting, the plastic bottle broke off (see the third picture) and I had to order more in a hurry I had to order more in a hurry (the third picture)
? looked like it could be reused, but I didn't want to make another mistake, so I decided to replace it with them
Even on the Net? It is a good thing that I was able to get a good idea of what was going on, because I thought that I was going to be able to get a good idea of what was going on
I ended up having to wait a few days for the second picture
One of them didn't break, but it was pretty degraded, so I'd recommend buying it from the beginning It is
Spring is Quantity:1 Set of 4pcs. it installs to wrap around the parts in the eye picture, but
Check the inside and outside of the fork to make sure it is facing the right way
Install the spring while adjusting the orientation
A similar part will be attached underneath the Spring, but you'll have to check the direction of the pin holes to make sure it's facing the same way Install
Quantity:1 Set of 4pcs
Once the Spring is assembled, grease it well and restore it
There are many different types of grease, but I used a generous amount of Urea grease to restore it! It was
I hope you will join us
It takes quite a bit of time to do the work carefully, but I am satisfied with the changes after the replacement
View detail
Fits: HONDA GORILLA, HONDA MONKEY
Battle at price
The installation has been done a few times with Gorimont FFork Parts Replacement Grease Replacement, so It's easy to remove from the Fork and divide it into two parts, but this is the first time I've removed the Fork Spring So when I watched Net and grabbed the game, I was grilling between the Vise and the Vise, and it didn't just miss, it went on and on I couldn't help myself, so I used a sander to cut it off I put it on the Vise stand and realized it was Opposite Thread Screw, so the second one was I managed to remove it with a lot of force
Installation is done in reverse order and then you can put the Grease to Quantity:Pair (for Left and Right) You can paint it in evenly (I make sure to apply the Grease so that no air gets into the Spring place every time I'll put it in.)
I grabbed the FBrake to see how much spring pressure I could get before the ride, and then I moved it up and down I felt it was quite hard, but there is no feeling of rattling at all when I started riding There is no NORMAL Full Bottom and no pompom when Brake is on (By the way, I installed an absorber on One Side.) I was able to drive my MONKEY at 60km with the Pi Pass as it is a second class Number The braking is now better than the NORMAL Plus Absorber
One last word, Moldy's packaging was very clean and Bigli
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50
It's very useful with a little extra work
I installed it on a Bore up LITTLE CUB 88cc
This one, though, is a cheap exhaust system
Maybe Cub Muffler, excluding Copy products, is webike1 cheaper?
It's cheap, but you can find it on the website of the famous Custom ShopMoldy in the CUB world I bought it because I thought it was reliable
[Structure]
Quantity:1 Set of 3pcs.Spec
The OEM CUBs are also integrated, and the external ones are usually large and integrated But if the CUB is bored up and running hard, it will resonate and break It was a mess at the end of the day
Probably because the Mount position is the Body Center and Silencer is extended behind it for a long time I think that was the reason I'd like to think it was the reason why Mizumoto broke
So this 3-Piece Structure was a wishful thinking
【attachment】
If you have a basic skill, you can afford to replace it yourself
Although the possibility of large-volume production cannot be denied in terms of price, it is Level As far as I'm concerned, Mizumoto RACING had a much harder time
[Running]
In the case of Baffle, there has been no drastic change from OEM
I've become a complete Style watchdog
But it didn't sound too loud and that was a good thing
Without Baffle, it's too loose and it's a blast Probably, the bottom is also scuffed
As a result, I had to drill holes in the Baffle and struggle to find the right amount of slack But it's cheap, so that's good!
[Others]
This is a cheap product, so I want people to use it if they can figure out that it's something like this There was a point
? Minimum ground clearance is too low
Maybe it was originally for MONKEY or something, obviously too low exhaust for a CUB I became Shaco Tan by handling the pipe
With LITTLE CUB, it feels like rubbing underneath when you enter Convenience
If you hit it too hard, it will kill Stud
Oil can't be replaced
Not being able to do it is an overstatement, but it's hard to do
What I mean by that is that the exhaust pipe goes right under the drain, so you have to take out the oil It takes just a few minutes
So if you ask me if I should remove the exhaust pipe every time I change the oil, I won't, because it's too much trouble
It's a bit of a hassle to solve, but I'm going to put Corrugated cardboard in it and put Oil on top of it Create a system that feels like the flow of
Someone's having trouble with the Brake pedal
I installed various external exhaust systems, so it was already taken care of, but the CUB Brake The pedal interferes a little bit
If the Pedal is positioned too high, you can use the color You can add a Don't forget to adjust the Brake after you do it
Owner's touch on the cheapest thing is the Large thing
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50
Cospa best!
C50 (49cc HeadTune car) I am using it.
Although it is touched with for CUB, Layout itself is the same as for MONKEYDown Exhaust System passing under the Engine.
This will reduce the clearance to ground, but for Kick pedal for MONKEY can be used and custom choices will increase.
It is impossible to imagine building around 10,000 yen in a good way.
The fitting of the Exhaust pipe is almost perfect, the welding is also beautiful, there is no excitement of the Bead inside the Flange.
Since there is no fancy yet, it is not suitable for those who want the Impact of the appearance.
Although it is the performance aspect of the essence, this also betrays expectations in a good meaning.
Except that Setting is a little difficult and the lower Torque is slightly thinner, it is a fun Exhaust System that can be used for Almighty from town to pass.
The volume is modestly modest in Down Type's Exhaust System, but if you compare it with NORMAL, you are still quite noisy, so be careful.
It may be a problem of individual differences, but the length of the attached Spring may not match, so it may be necessary to prepare separately.
Also, the Exhaust pipe has passed through just under the Drain bolt, Oil is applied every Oil change and the cleaning is Large strange.
Although I can not help to say that the price is suitable if I look at the details, I think that it is an excellent gem for Cost performance even in that case.
I want to make it an external exhaust system but I do not want to be so picky, it is recommended for those who do not want to spend money there.
View detail
Fits: HONDA GORILLA, HONDA MONKEY
There is no Instruction Manual
15? Down purchase 24? Spanner and vice need attention Please note the orientation of Upper Spring holder 5 LMONKEY requires Slide pipePiston so thin 24? Spanner is also necessary Normal Spring can not be removed, so I disconnected with Thunder. Next, remove the Spring cut by cutting the Upper Spring holder between all vise, and now turn down the Lower Spring holder 24 in thin shape with the Spring below, and remove it by thinning. It is easier to install from the Upper Spring holder, or it may be easier to start with Grease Rotate Spring by hand and tighten to the same position as NORMAL Next time, attach the bottom Lower Spring holder to the finished car body and finish it when compared with NORMAL I do not feel Stress with a sense of off-road Also, it's more comfortable to ride than Zoom's Down suspension attached to your favorite car, AXIS T light tiger. View detail
Fits: HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub]., HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub].
Those who dislike CUB fluffy Front peculiarly investigate!
Exchange with Shop and exchange. The reason is that Spring compressor can not be prepared.
Since the suspension unit of the first-class Manufacturer's Shock will be in the range of 9800 to 15000 yen, the spring fee + wage is overwhelmingly cheaper. (I fell within 8000 yen)
If you can do it by yourself, you can see the effect at 4320 yen.
If you show OEM's Shock during disassembly, it will be punyu ~ ~ ~ urgently moving so it may be missing (De Fault Behavior? While having anxiety, I had it built into cubySpring.
【Imprint after installation】
- Handling is demon heavily because it is solidified in Solidly, the impression that we declined from power steering to heavy steam in Car. It was good that it was feeling that I was steering a full-scale Motorcycle as the Handlebar could not easily swing easily.
- When stopped, when Front Brake was canceled Front rise became Zero!
- 60km / It occurred with a straight line over h "Front does not grip" The feeling of fear ceases.
【Future tasks】
Since OEMShock is Sauce, changing feeling of Shock will further improve Fe Ring.
★ Replacing and correct answer. Rear suspension (Shock) I should have done at the same time.
People who are still using OEM Shock & Susason want to try it soon.
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50
Is it good?
It is purchase at Wa Big Yahoo! shop.
I bought it because Review is good, but the result is a little regret.
There is a problem with installation and routing of Pipe. I step on Exhaust System when stepping on FootBrake.
Brake does not work where you hit and further stepping on will move the Exhaust System.
With more than 90 cc, with Baffle removed and prepared for explosion?
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50
Excellent for COSPA
I used it in a CUB that loaded CUB 100 THAI 100 Engle in an old CUB. Engine Displacement Volume is 97 cc. As in Imple, OEMMain stand can be used, but since Spring suffers, is it because each person is it? If you do not have Baffle,. Baffle ant, I felt it was a high speed rotation. If it is 3rd speed you can check up to 11000 so if you can process Baffle it will be possible to use from 75cc to 100Over. In the other 107 cc it is just as good as without Baffle. I saw it up to Meter 13000 but scary vibration from Engine.
Speaking of the difficulty is difficult to exchange Oil. You can see how efficient OEM handling of CUB was.
I liked looks but it was evaluated as an easy-to-use Exhaust System.
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50
Exhaust System
I installed it on CUB PRESS. In the past I installed a different external exhaust system, but I was feeling clogged with Engine Displacement VolumeUp, so I was looking for a cheap Exhaust System corresponding to Engine Displacement VolumeUp I met this Exhaust System. Also in other comments, Center Stand keeps on with Large It's durable Exhaust sound comes with Baffle so it's not an unnecessary Level Running is a clogged Hun
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50
Sounds dangerous!
I am doing a really good sound! I am satisfied with the appearance & sound emphasis rather than performance, so I am satisfied with Large!
Only one, Gasket does not suit. Nut does not reach when meshing Gasket. It may be bad for me, but as it is not possible to confirm the exhaust leak so far so good! (Lol)
View detail
Fits: HONDA GORILLA, HONDA MONKEY
The ride has changed definitely!
Since Grease was leaked from MONKEY's Front fork acquired in second hand, I exchanged Spring after Boots exchange.
In OEMSpring, the movement was bad and I did not use it as a Suspension, but after changing to this, I will steeply stepping forward. It was harder than I thought, but it got easier to ride.
Exchange was quite Large strange. Especially if you do not have a fixed thing such as Vise for installation, I think it is quite Large strange. Because I did not have Vise, I could not insert it all the way back.
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50
Hello. I decided the Exhaust System on my my motorcycle would sound really good with a new exhaust & it does. Standard exhaust systems which is installed from factory, sounded too quiet.
Hello. I decided the Exhaust System on my my motorcycle would sound really good with a new exhaust & it does. Standard exhaust systems which is installed from factory, sounded too quiet. View detail
Fits: HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub]., HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub].
First time purchased from this website. I was really impressed the way you handled my order,prompt reply instant update on items and very fast delivery. Will definitely be using them again.
First time purchased from this website. I was really impressed the way you handled my order,prompt reply instant update on items and very fast delivery. Will definitely be using them again. View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50
Install Exhaust System on CUB PRESS
Bore up CUB PRESS to 126 cc,
Exchange Exhaust System.
Even with the attached Baffle, even if it is attached, it is overexposed and the Exhaust System sound will be heard but at this price it is all at all OK if you could have bought it - - -
View detail
For coza
I was looking around in various places
Home center and
In Motorcycle clothing store etc.
There is no handling of this size
Find it on Wee Big
It was saved.
View detail
Fits: HONDA DAX [Dax]., HONDA CHALY [Shally]., HONDA DAX [Dax]., HONDA CHALY [Shally].
It might be surprisingly surprising
CHALY 's Rear shock installation Nut was rusted, so I thought that it looks better even a little. Plating not Material : Stainless Steel is strong against rust, ◎, usually (14) I'm Large (17) There is also a sense of security. View detail