Reviews
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50
Cospa best!
C50 (49cc HeadTune car) I am using it.
Although it is touched with for CUB, Layout itself is the same as for MONKEYDown Exhaust System passing under the Engine.
This will reduce the clearance to ground, but for Kick pedal for MONKEY can be used and custom choices will increase.
It is impossible to imagine building around 10,000 yen in a good way.
The fitting of the Exhaust pipe is almost perfect, the welding is also beautiful, there is no excitement of the Bead inside the Flange.
Since there is no fancy yet, it is not suitable for those who want the Impact of the appearance.
Although it is the performance aspect of the essence, this also betrays expectations in a good meaning.
Except that Setting is a little difficult and the lower Torque is slightly thinner, it is a fun Exhaust System that can be used for Almighty from town to pass.
The volume is modestly modest in Down Type's Exhaust System, but if you compare it with NORMAL, you are still quite noisy, so be careful.
It may be a problem of individual differences, but the length of the attached Spring may not match, so it may be necessary to prepare separately.
Also, the Exhaust pipe has passed through just under the Drain bolt, Oil is applied every Oil change and the cleaning is Large strange.
Although I can not help to say that the price is suitable if I look at the details, I think that it is an excellent gem for Cost performance even in that case.
I want to make it an external exhaust system but I do not want to be so picky, it is recommended for those who do not want to spend money there.
View detail
Fits: HONDA Super Cub 70, HONDA Super Cub (HA02), HONDA Super Cub (C90 type), HONDA little cub, HONDA Super Cub 50 (C50 type), HONDA Super Cub 50 (AA01), HONDA SuperCUB110pro [SuperCUB110Pro]., HONDA SuperCUB110 [SuperCUB110]., HONDA CUB [Cub]., HONDA little cub, HONDA Super Cub 50 (C50 type), HONDA Super Cub 50 (AA01), HONDA SuperCUB110pro [SuperCUB110Pro]., HONDA SuperCUB110 [SuperCUB110]., HONDA CUB [Cub].
Is good
I was looking for something that will not rust as it will run on the mountain with CUB and become muddy.
It was not possible to attach it to the clipping point on hand, the Up type muffler of the water circle RACING.
The water head Racing Up Exhaust System may be used if there is an ultra thin socket?
View detail
Fits: HONDA GORILLA, HONDA MONKEY
There is no Instruction Manual
15? Down purchase 24? Spanner and vice need attention Please note the orientation of Upper Spring holder 5 LMONKEY requires Slide pipePiston so thin 24? Spanner is also necessary Normal Spring can not be removed, so I disconnected with Thunder. Next, remove the Spring cut by cutting the Upper Spring holder between all vise, and now turn down the Lower Spring holder 24 in thin shape with the Spring below, and remove it by thinning. It is easier to install from the Upper Spring holder, or it may be easier to start with Grease Rotate Spring by hand and tighten to the same position as NORMAL Next time, attach the bottom Lower Spring holder to the finished car body and finish it when compared with NORMAL I do not feel Stress with a sense of off-road Also, it's more comfortable to ride than Zoom's Down suspension attached to your favorite car, AXIS T light tiger. View detail
Fits: HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub]., HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub].
Those who dislike CUB fluffy Front peculiarly investigate!
Exchange with Shop and exchange. The reason is that Spring compressor can not be prepared.
Since the suspension unit of the first-class Manufacturer's Shock will be in the range of 9800 to 15000 yen, the spring fee + wage is overwhelmingly cheaper. (I fell within 8000 yen)
If you can do it by yourself, you can see the effect at 4320 yen.
If you show OEM's Shock during disassembly, it will be punyu ~ ~ ~ urgently moving so it may be missing (De Fault Behavior? While having anxiety, I had it built into cubySpring.
【Imprint after installation】
- Handling is demon heavily because it is solidified in Solidly, the impression that we declined from power steering to heavy steam in Car. It was good that it was feeling that I was steering a full-scale Motorcycle as the Handlebar could not easily swing easily.
- When stopped, when Front Brake was canceled Front rise became Zero!
- 60km / It occurred with a straight line over h "Front does not grip" The feeling of fear ceases.
【Future tasks】
Since OEMShock is Sauce, changing feeling of Shock will further improve Fe Ring.
★ Replacing and correct answer. Rear suspension (Shock) I should have done at the same time.
People who are still using OEM Shock & Susason want to try it soon.
View detail
Fits: HONDA GORILLA, HONDA MONKEY
According to Overhaul of Front fork
After replacing the Rear shock, I became more aware of Front's poorness,
Also, curing of Dust Seal - Crack crack, Grease leak was also terrible,
Overhaul In addition I introduced Reinforced Spring.
OEM Length (30% strengthening) Although I put things of,
It became solid and stable, stable - I feel secure..
Since the work process and the tool to be prepared falls a lot on the net, it is omitted.
Upper / There is some hang to desorb Spring from LowerSpring holder.
Between the desk vice, we strike the conch and Spring end part with Graver or Slotted screwdriver.
I do not need much power, but I can not come off unless I hit it to some extent.
Even when you wear Reinforced Spring in Holder,
Spring with vice and turn Holder in Wrench, you can incorporate it in the lake.
Because I did not take out the Spring end BALI,
Although I scraped the Holder with crackling, I installed it without worrying about it.
Perhaps you should treat the neighborhood as a chitin.
Also, assuming Wheel assembly time, the orientation of the Inner pipe - It is better to pay attention to the angle.
If you prepare the tool properly in advance, the work itself is not difficult at all,
I think that it would be better to replace the OEM Parts Number as a part of Overhaul, but to feel the benefit of Reinforced Spring more.
Finally, since the work is endless, it is black and it is attached with an old Grease like a mass of mud,
It is good to prepare Dustcloth for more.
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50
Is it good?
It is purchase at Wa Big Yahoo! shop.
I bought it because Review is good, but the result is a little regret.
There is a problem with installation and routing of Pipe. I step on Exhaust System when stepping on FootBrake.
Brake does not work where you hit and further stepping on will move the Exhaust System.
With more than 90 cc, with Baffle removed and prepared for explosion?
View detail
Fits: HONDA GORILLA, HONDA MONKEY
Type A MONKEY (Z50Z) It is also Exactly.
Front fork's decomposition I damaged OEMSpring at OH and thought about repairing with OEMSpring, but sometimes prices did not change so much, so I decided to try OEM Length's Reinforced Spring.
Small raw MONKEY does not fall under conformity model because Rear is Rigid's type A, but it is not suitable for conforming models, but MONKEY after J type and shape - Since Length is the same, it can be installed as it is.
Because Rear is Rigid, I thought that if you harden the Front it might splash with Solidly before fitting, but rather it seems that Balance before and after it seems to have been taken, on the paved road the riding comfort is also reduced by the amount of reduction in front and rear Pitching It was surprising that I got better.
If you do not mind the OEM Parts Number, I think this Spring is preferable.
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50
Excellent for COSPA
I used it in a CUB that loaded CUB 100 THAI 100 Engle in an old CUB. Engine Displacement Volume is 97 cc. As in Imple, OEMMain stand can be used, but since Spring suffers, is it because each person is it? If you do not have Baffle,. Baffle ant, I felt it was a high speed rotation. If it is 3rd speed you can check up to 11000 so if you can process Baffle it will be possible to use from 75cc to 100Over. In the other 107 cc it is just as good as without Baffle. I saw it up to Meter 13000 but scary vibration from Engine.
Speaking of the difficulty is difficult to exchange Oil. You can see how efficient OEM handling of CUB was.
I liked looks but it was evaluated as an easy-to-use Exhaust System.
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50
Exhaust System
I installed it on CUB PRESS. In the past I installed a different external exhaust system, but I was feeling clogged with Engine Displacement VolumeUp, so I was looking for a cheap Exhaust System corresponding to Engine Displacement VolumeUp I met this Exhaust System. Also in other comments, Center Stand keeps on with Large It's durable Exhaust sound comes with Baffle so it's not an unnecessary Level Running is a clogged Hun
View detail
Fits: HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla]., HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla].
Used with GORILLA
OEM's Bolt got rusted, so I bought it as a Stainless Steel if you exchange it anyway.
It becomes OEM's 14 to 17 mm, torque is easy to put on, it looks better.
Size is not sold to Home center.
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50
Cospa best. Large satisfied
Mounted on 1995 model HA 02 type CUB 90.
With no manual, it takes a while to install for the first time.
Excellent for Cospa Large I am strange.
Also, you can use Center Stand firmly.
Image reference. (*^-^*)
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50
I did not read the explanation I was bad.
Especially carburetor exclusive etc etc. Because I did not write it, FIPRESS (PGMFi) I bought it thought, but I did not fit at all, but I got a Down Exhaust System condition. To do so now. It will be appreciated if you write at least that FI does not attach to the explanation.
I will weld and use it for the time being.
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50
Attached to CUB90DX
Discovered while considering Other Company Product because the hole in the OEM's Exhaust System has been opened.
With tens of thousands of yen for other company's Exhaust System, All Sten's Exhaust System.
Can not you use Center Stand by watching other people 's impressions?
I thought, but I am using it.
When Spring of Center Stand and Exhaust System are used when using STAND, there is no problem during running.
Since there is no problem with this interference and running, the one who does not mind is cheap and it is solid and it is recommended because it can use Center Stand.
Although it is the sound to worry, when using Baffle it seems like a little noisy number of Popokopo and OEM.
I am here now.
Removing Baffle makes it sound like a 250 CC single cylinder.
It is thick..
It will notice even if you are running on the Large Ki-no-dori.
It is recommended 1 pc.
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50
Sounds dangerous!
I am doing a really good sound! I am satisfied with the appearance & sound emphasis rather than performance, so I am satisfied with Large!
Only one, Gasket does not suit. Nut does not reach when meshing Gasket. It may be bad for me, but as it is not possible to confirm the exhaust leak so far so good! (Lol)
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50
It is good.
There is no particular problem.
The sound is Large and bass is strong. Turning on Baffle makes it quite quiet.
The surface is beautiful Gold belonging gloss, there were about 2 scratches not to know without looking.
Spring of the coupling part was tight and the installation was a little Large strange.
Overall, I am very satisfied..
View detail
Fits: HONDA GORILLA, HONDA MONKEY
The ride has changed definitely!
Since Grease was leaked from MONKEY's Front fork acquired in second hand, I exchanged Spring after Boots exchange.
In OEMSpring, the movement was bad and I did not use it as a Suspension, but after changing to this, I will steeply stepping forward. It was harder than I thought, but it got easier to ride.
Exchange was quite Large strange. Especially if you do not have a fixed thing such as Vise for installation, I think it is quite Large strange. Because I did not have Vise, I could not insert it all the way back.
View detail
Safety written as for Transporter
Bolt for four wheels, sometimes Pitch is different. On that point, this product is properly "For Transporter" It is safe because it says. Easy to install, it can be used as a point to hook Tie Down. View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50
Hello. I decided the Exhaust System on my my motorcycle would sound really good with a new exhaust & it does. Standard exhaust systems which is installed from factory, sounded too quiet.
Hello. I decided the Exhaust System on my my motorcycle would sound really good with a new exhaust & it does. Standard exhaust systems which is installed from factory, sounded too quiet. View detail
Fits: HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub]., HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub].
First time purchased from this website. I was really impressed the way you handled my order,prompt reply instant update on items and very fast delivery. Will definitely be using them again.
First time purchased from this website. I was really impressed the way you handled my order,prompt reply instant update on items and very fast delivery. Will definitely be using them again. View detail
It is convenient, but with Nut genus is good
We are exchanging various Transport Bolts of High ace.
It is hard to sell to Homsen, but you can raise the price so I want you to have vari Nation with Nut genus too.
Also, if the Screw part is 10 mm longer, it can be used for backing, but it can only use OEMBolt exchange degree such as Seat like Length.
View detail