Reviews
HandlebarUp
I'm 170cm tall and a little small, and the DAEG footpeg is at the front, so I went with the Handlebar Up. It is a shame that the OEM Handlebar Weight could not be used. View detail
Fits: YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT03, YAMAHA YZF-R3
grip
The grip is great. There is no sticking, and the force needed to grip it is reduced by half.
However, the Clutch lever felt a little far even if I made it the closest with Adjuster for me who has small hands.
But overall, Large satisfied.
View detail
Good
The Lever ratio will change slightly. (Clutch) You will get used to it. Finger contact and feel are both good. Personally, I don't think I need Logo on my Lever. View detail
Motorcycle Seat cushion
I bought this as a seat cushion for my motorcycle. In my case, I had Mesh Type Cushion for summer, so I bought it to use Seat cushion even in winter. As for the performance, I think that there are individual differences such as the vibration under the seat and the reduction of the pain of the butt, but there is a definite effect for me. A friend of mine has this product installed on a Honda single cylinder motorcycle, but the vibration when riding is considerably different without it. If you are suffering from not only pain in your butt but also vibration under the seat, this is the product you should try. In fact, I also use the Seat cushion itself for the purpose of reducing the vibration from under the seat, so I recommend it. View detail
EFFEX Handlebar Weight BIG for Aluminum Handlebar
I used it when I changed to ZX25R O-Pipe Handlebar.
The large size of the end is also a good large size, and it was good to reduce vibration.
View detail
Fits: YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03, YAMAHA MT03
Changed for new Handlebar position
Due to the change of the Handlebar position, the length of the OEM Throttle Cable was not reachable, so I replaced it.
MT25 is NAKED, so there is no Cowl removal, so it is less difficult to replace.
View detail
Pimp it!
Exclusive Design is as good as it gets.
It can be popped on, just align the holes like OEM.
Don't forget to use Bar End separately.
View detail
Fits: SUZUKI TL1000R, SUZUKI SV1000S, SUZUKI SV1000, SUZUKI GSX1400, SUZUKI GSX1400Z, SUZUKI GSX1400, SUZUKI GSX1300R Hayabusa, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM1000, SUZUKI BANDIT1250F, SUZUKI BANDIT1250
3Quantity:Purchase Set eyes
Same product3Quantity:This is the second set I purchased. Because the mileage is 40-50,000km per year, the wear of the resin part is severe.
Repeat. As always, the ease of grip is outstanding. I also considered other companies' products, but I decided to go with this one. I was really hoping for a black color, but since it takes time to deliver, I decided to go with blue.
View detail
Handlebar exchange
Installation processing, etc.. I think it's very good. View detail
Quantity:I'm happy with the price and performance of this Set!
Since the OEM Clutch lever does not have an adjustment feature, the lever position felt too far away.
I had no complaints with the Brake lever because of its adjustability, but replacing just the One Side is not a good idea.
It's not good for Visual....
Quantity:I found this when I was looking for something affordable in Set.
I found the grip and lightness to be not much different from the OEM, but the six-step adjustment feature is very useful.
I think it would have been even better if it was a little lighter.
I was going to get the Black, but it was not in stock at the time of purchase and would take a while to deliver.
I went with Red to match the color scheme of the Tank.
It looks and feels more custom, and I'm happy with the results.
When I was a teenager, I used to break the Lever and replace it by standing on it, so I'm good at working on it (^^ゞ)
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Ninja 1000SX
Necessities for short stature
The ball of the mother's finger is attached from the toe stand.
When I added OHLINS Suspension, the ride height went up, so I added it.
I've also heard that as Cavitation acclimates, it goes down a bit.
Short Stand is a necessity because of 20mm Down.
Rear Fender was modified slightly.
View detail
A hint of goodness.
I couldn't stand the pain in my butt with the Normal seat of the D Tracker, so I changed it to the COZY seat of DAYTONA, but my butt still hurt. So I added Gel Zab to the COZY seat, and the pain was relieved somewhat. However, after 5 or 6 hours of riding with sitting, it will start to hurt again. It's better to have it than nothing, it's a product with a faint feeling of goodness. View detail
The fixing method is not good.
I think it works because I went from having a sore butt in an hour to two hours.
However, depending on the nature of Universal Product or Seat shape, the fixing method may not be good.
With our Seat, the front of the tapered side did not fit the Velcro fixing surface.
I wish there was a little more repartee on how to fix it.
View detail
Seat Shape Caution
In my case, the tip of the seat is narrow, so Magic tape can not reach the seat. In my case, the tip of the seat is narrow, so the Magic tape could not reach and only the back side was fixed.
As for the effect, my butt usually starts to hurt after about an hour and a half, but when I put the Gel Zab on, the time it takes for my butt to hurt has doubled.
It is a pity that the installation method is not good enough because it is effective.
View detail
First replacement in 10 years.
I've been using the Small one for over 10 years now!
The weight in the handlebar was revolutionary at the time and was only sold by this manufacturer.
Now, it is sold by each manufacturer, and each company seems to have evolved and devised.
I bought the Large size one this time, I don't think it was available at that time.
It's got some Weight to it, so I'm a little hopeful, but I doubt it'll change much. (I don't think I can tell the difference, I'm an ordinary person)
View detail
It's easy, but...
I installed it on my 19model MT-09.
I think it's better if I apply Grease to it.
Special Tool is not necessary, and I think that the work is an easy part.
The first thing I said when I got on the bike was, "What the hell is this?
It's like a Scooter, but with the Handlebar closer and higher, it's the easiest Position you'll ever have.
I put in the company's Bar End, so there are no strange vibrations.
Demerit by changing Handlebar is also described.
The upper body is standing up too much and the wind pressure is too strong when the speed is released.
My hands are too close together and Curve is hard to bend.
View detail
Very good!
There are many colors and patterns to choose from.
I chose Black to match the color of my car.
Installation is easy.
I was very happy that the vibration was gone.
View detail
I didn't feel it worked as well as I had hoped.
I used it on my D Tracker 125 and it doesn't seem to change the pain in my butt that much, maybe 5%-10% less. The seat width is too narrow to begin with, so I felt that I need to improve that to get to the root of the problem. View detail
It's a lot better.
I have it on my Grom and it was so bad that it would hurt in 30 minutes as OEM, but this product has made it much better.
The only thing is that it doesn't look good and the price is quite expensive, so you might as well buy a custom seat.
View detail
More effective than expected
I peeled off the Seat by myself and scraped and embedded the Urethane.
When I was Touring, I more than doubled the distance I could run before my butt started to hurt.
View detail