Reviews
OilRoute partially changed Custom
We have installed Cam Screw together with Camshaft ChainBypassKit at the same time, and by changing a part of OilRoute, we have been able to increase Torque at low to mid speed range as well as improve Throttle I feel that the throttle response has improved as well as the Torque up at low to mid speeds. The hose length can be adjusted to your preference, I used it as it is and added a Colgate Tube to the hose for protection. It is fun to customize the Ideas to your own taste, isn't it? View detail
Fitting quality
We have now installed all the cooling fins from the first to the third level. The installation is very good, and the fitting to the SR is so well made that we thought it was OEM. I bought it this year to prevent heat leakage in summer, but in the past, oil temperature has risen up to 100℃ during summer touring. I am reporting the effect on the cooling fins with high expectations. We also considered using an oil cooler, but considering the concern about over-cooling during the winter, we decided to go with the cooling fin system. I would like to continue to enjoy my motorcycle life in the future. View detail
Necessary items to connect to Air cleanerBox
Not necessary if no Air cleanerBox is available or cannot be connected. View detail
Looks good for Engine.
The effect was not felt on the ride, but it seems to reduce the load on the Engine. View detail
Waterproof property is not good
I bought this for Repair because the original Fender Eliminator License Plate Light was damaged. The light shines well and the visibility is good, but the waterproof property is not so good… Large rainfall causes water to get in… For now, I use it with Duct Tape wrapped around it, but I think it would be better to use it for a long time by coking etc. View detail
It didn't work
I tried to install it, but I have it set to short suspension.
What a surprise, Chain didn't hit Roller ….
I will try to install it again when I change to Normal suspension.
It would have been nice if you could have written something about not being able to use it if it's Lowdown.
A little disappointing.
So we do not know the effect of the installation.
View detail
Good feeling
I thought it would reduce the load on the Engine, but I could feel the Engine revving better (Smooth). It is worth installing. It is worth it to put Cam Screw (sold separately). View detail
Looks rust-resistant
I have not installed it yet, but the OEM bolt of SR400 has rusted, so I purchased this product expecting the Titanium bolt. The OEM bolt is tightened by Hexagonal Wrench, but this product is Hexagon Bolt, so I am worried if I can manage the torque in such a small space.
I would like to post an IMPRESSION after installation.
View detail
Seems to take care of the installation.
I was smitten with the appearance of the product and purchased this product. When I saw the arrived product, I was satisfied with its texture. However, due to its special shape (the diameter of the hook part is slightly larger than that of the Nut), a socket wrench cannot fit in the Nut size, so a socket wrench with a slightly larger diameter is required. Naturally, a normal wrench can be used instead of a Socket wrench, but since our Torque wrench is Socket-compatible, we will not be able to use a Socket wrench.
Currently, there is no Torque listed, so we are inquiring with the Manufacturer if it is the same as OEM.
View detail
Effectiveness. Recommendation if appearance is acceptable.
I bought this product to adjust the temperature for summer although it is still winter.
First, a few thoughts on the installation.
NORMAL is cooler..,
I'll take it off if the effect is not that great after running it.
Try running
Oh, I can't miss this one.
The ride quality has improved, with more stickiness at low speeds.
I think that NORMAL is the most beautiful Engine for SR, but once you put it on, you can't take it off because the Bore Ace product improves the ride blatantly.
The appearance of the product was a concern, but while it is quite noticeable when viewed from a crouching position, it is not so noticeable from the normal line of sight.
It is effective. If it also dissipates heat, it is a good cosmetic product. If the appearance is acceptable, this is a product that can be recommended.
View detail
PetitCustom feeling too!
Lowdown so I went to Short Side Stand because I was standing too much in NORMAL Side Stand.
Then this one tilts too much….
I put Boots on and it was a bit of a nice tilt.
A little processing was required, but it is easy to do.
I like it because of the PetitCustom feel.
View detail
Shift change can be done firmly.
This is an installation on an sr400Final edition. I was not particularly dissatisfied without the assist, but after installation, "Snap" and Shift is entered, and it feels good. Especially, when waiting for a traffic light and putting in Neutral, Stress is also reduced. View detail
Required Parts for Change Accent
These are the Parts required for the installation of the Change Accent, but we would like them to be included with the Body.
Change Accent, installed on sr400Final edition. I was not particularly dissatisfied without Assist, but after installation, "Snap" and Shift is entered, and it feels good. Especially, when waiting for a traffic light and putting in Neutral, Stress is also reduced.
View detail
Is it a fake? I don't know.
The Instruction Manual is really minimal, but the distance to the Chain is adjusted by Washer, etc., so beginners must be putting it on the wrong way. View detail
It worked.
Shift pedal no longer feels squishy laterally, and although the shift change is not drastic, I can now enter Snap and Smooth when entering from N to 1 at a stoplight.
Partial cutting of the OEMSprocket Cover was done using Leutor. It was not that difficult even for an amateur.
View detail
Motorcycle is moving right along.
The SP Tadao PowerBox and Bore Ace Twin oil line had already been installed.
The two above products made the embellishments mellow and easy to drive with, and this improved it even more.
In the twin oil line, wobble during gear changing in low speed GEAR is reduced by a Large width, and this response makes it even smoother.
The most noticeable change I experienced was a clear change in the way the Axel progresses when twisted at high GEAR.
I feel like I have more propulsion to move forward smoothly and leanly rather than faster. Running has become more enjoyable.
Mounting is done by shifting the Tank a little. It looks good and unobtrusive. If I had to make a special order, I would prefer the hose color to be Black.
Oil line and quantity by all means:This is a product that should be tried by Set.
View detail
Ponting is safe. I would love to see Black released.
Purchased for installation of the company's Cylinder headResponse.
They take into account the length and other factors for performance demonstration, so there is no need for us to do any processing.
It looks sturdy and solid to the eye.
After installation, this Hose is hardly visible from the outside, but a little bit is visible. The color Black seems to be better in terms of appearance.
View detail
Vibration is reduced and engine braking is weakened
This is an introduction with a bore Ace Valve on the Head side.
I installed it hoping to solve the lack of Torque feeling between 5th gear around 4000 rpm and 5000 rpm.
I think the result was a pleasant improvement.
Up to 4th gear, the Engine feels as if it is revving lighter, an effect similar to Valve, which was worn on the Head cover earlier.
If you are not concerned about vibration, you can wear it.
View detail
Those who understand can understand Rapid.
Tank end a little. (about 8mm) The Level goes up and becomes the same as the Level under Seat, and is Refreshing.
Those who understand will understand.
In addition, for those who remove the tank, the tank has been raised slightly, making the removal work easier.
I recommend it because it is easy to install and inexpensive.
View detail
I think it is an Ideas product like no other.
The combination of an OEM headlight and an external headlight bracket is an excellent way to adjust the optical axis without opening the headlight case. The parts are not visible from the outside, but as expected from Boa Ace. The quality is excellent. The price is a little bit high, but I think it is a great Ideas product. View detail