Reviews
Genuine GBRacing Pulse Cover for Kawasaki Ninja ZX10R 2016
There are some pretty important parts behind the standard pulse cover so this is a must to finish off the protection job. Although it is a small piece, it does an important job. Even though I have the generator cover and the clutch cover, I had to get this one too to make the bike look complete. I cross referenced the part numbers with GBRacing website to make sure I had the right one for the Kawasaki Ninja ZX10R. The cost that Webike sell for is really good and around the same as I could source locally. I could not tell you for sure what exactly the composite of these covers is but they have fibre and plastic from what I have read. GBRacing have made a composite of the materials to be durable, long lasting and take a good beating if they need to and yet, still protect the bike. They also look really cool. When I got the packages, the pulse cover looks amazing. The finish is a smooth satin black with some great detail in the logo and lettering looks really cool. Install took around an hour for all 3 covers so not a hard job and anyone can do it. Just remove the bolts stated in the instructions and replace with the ones proveided in the packet. Super simple. End result is awesome. Very pleased with how it all looks and now I do not have to worry about damaging anything. Thank you Webike, great help. View detail
Fits: YAMAHA GRAND AXIS, YAMAHA VOX, YAMAHA VINO, YAMAHA JOG, YAMAHA GEAR, YAMAHA VINO, YAMAHA APRIO, YAMAHA JOG50, YAMAHA BWS50, YAMAHA BWS50, YAMAHA Old JOG, YAMAHA Old JOG
Just receive item
Second time order from webike..the quality of packaging still tip top for me with the bubble plastic and so on..well order again in future..thank you View detail
Fits: HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA CROSSCUB110
Beautiful Clearance with MORIWAKIShortMONSTER S2
[How is it used?
Street riding.
Was the one you received as per Image?
The quality is good enough because it is made by Takegawa.
Was the installation difficult?
If you can lie on the ground and work on it, you can do it in 15 minutes.
How was your experience with it?
The exquisite clarity with MORIWAKI muffler is irresistible.
Other items that would be helpful
Installation Point or hang
Always work with the main stand up, and Torque control is important.
Availability and clarity of Instruction Manual
The explanation is sufficient since we only need to pull out four Bolts and reattach them.
Opinions and requests to Manufacturer
High quality, high price.
View detail
Easily Black Spec.
[How is it used?
Street riding.
Was the one you received as per Image?
It is not so bad, but not so bad.
Was the installation difficult?
Just remove one Screw and insert it.
How was your experience with it?
Blinker's Plating was a bad girl and I was concerned about it, but here it all went away.
[Was there anything that disappointed you?
Roughness of the manufacturing process. BALI removal and file hanging are essential before installation because of the great BALI.
Other items that would be helpful
Availability and clarity of Instruction Manual
No Instruction Manual.
Opinions and requests to Manufacturer
I would like to see you at least take BALI.
View detail
very good
I have received it well. It looks good and you feel mentally stable after using it. After installing it, it looked easy, but since it was floor work, my back hurt and it was quite difficult. This is a level you can do on your own if you take the necessary tools and read the manual calmly. Very satisfied. -------------------------------------------------- -------- I have received it well. It looks good and you feel mentally stable after using it. After installing it, it looked easy, but since it was floor work, my back hurt and it was quite difficult. This is a level you can do on your own if you take the necessary tools and read the manual calmly. Very satisfied. Powered by Google Translator View detail
Fits: HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
Lowdown link
Excellent quality they fit perfect with no alterations needed. Look great on the motorcycle. Would recommend them to anyone who wishes to lower their bike. View detail
NS400 Carb rebuild
Well made part fits well with no issues, replacing the original plastic part. Finish on part is good, got the replacment rubber sealing caps to complete as the original rubber had gone hard after 40 years. View detail
Solid power up and Minimoto-like style
[How is it used?
My CRF125F has been heavily used in Motocross and HardEnduro since I bought it, but I have improved the suspension and controls so that I can run at a good pace. I'd like to make it a little more powerful." I have come to think that this is a good idea.
However, Engine Displacement VolumeUp and ECUTune, which are available in overseas products, are not so cute and expensive for Minimoto, so we chose to replace the Exhaust System as a tuning that also includes appearance.
It is the Exhaust System for CRF125F sold from various manufacturers, but first of all, I chose Delta because of its cute Minimoto-like appearance and the fact that it is published in the Graph etc. that it is effective, and also because of the articles on the Web about the replacement and installation. I chose Delta which had a sense of security because it was published on the web.
We were impressed by this DirtFreak product, which is indeed the conscience of Japan's off-road industry.
Was the one you received as per Image?
The quality of the exhaust pipes is excellent, the bending of the exhaust pipes is beautiful, and the silencer assembly accuracy is excellent.
It was obvious that it was lighter than the OEM exhaust system in my hand, and I had high expectations for the two-layer thicker exhaust pipe.
The design of the Silencer exit is like the TRAIL from a long time ago, and it has a Minimoto-like cuteness rather than the parenthesis of the newest model, Motocrosser.
Was the installation difficult?
The instruction manual is included, so I was able to install it without any problems. In addition, the distributor's own media published more detailed installation articles on the Web, so even a clumsy person like me was able to install the system without any worries.
It is essential to install them in such a way that they do not become Overtorque in any part. (for stupidity) 。
How was your experience with it?
During a test run after installation, the change in sound quality is first noticed.
I can hear the sound of the Delta Exhaust System when I open the Axel, and I feel nostalgic because I used to have the Delta Exhaust System on my other street-going car in the past. I feel nostalgic about it.
Impressions after driving There's a definite sense of power up." The low rpm toddling feeling of the CRF125F, which is also easy for beginners, is maintained, and when the Axel is opened and the engine is revved up, the engine has good extension and the speed rises quickly and smoothly.
I felt that I could climb more easily than before because the acceleration was better even when I was in full 2nd gear, which is often used for hill climbing on the HardEnduro.
Also, the exhaust pipe has been thickened to make it easier to remove the exhaust. I also feel that the embargo when the Axel is turned off has become calmer, perhaps due to the effect of the larger exhaust pipe. I think this is a benefit for beginners who tend to feel awkward when operating the Axel at low speeds.
I honestly didn't see the effect of the weight reduction. lol The body is light to begin with, so it's easy to wake it up if it falls. ....
[Included Parts:were they on?
Exhaust Gasket
・Heat Guard
The two items are not included in the package, so it is recommended to purchase them separately at the same time to make the work Smooth.
Also, when removing the OEM exhaust system, the bolt may be very hard due to heat, etc., so a penetrating glide agent such as Raspene may be a good idea.
In summary, we were very satisfied with the design, solid performance, and quality of the product, which is typical for Minimoto.
There may be some that perform better, but I don't think anything too expensive would suit Minimoto.
Pit bike in the past (CRF50F) Custom was once popular in the past, but as a result of the ever-increasing performance and prices in that way, Boom has suddenly converged, so ..... I hope that will not be the case with MinimotoBoom this time!
View detail
Repeater
I replaced the old one with an aging one, and I put it where it didn't belong. View detail
Fits: SUZUKI GSX600F, SUZUKI GSX600F, SUZUKI GSX600F, SUZUKI GSX750F, SUZUKI GSX600F, SUZUKI GSX1300R Falcon, SUZUKI GSX1300R Falcon, SUZUKI GSX600F, SUZUKI GSX600F, SUZUKI GSX1300R Falcon, SUZUKI GSX1300R Falcon, SUZUKI GSX1300R Falcon, SUZUKI GSX1300R Falcon, SUZUKI GSX1300R Falcon, SUZUKI GSX-R1100, SUZUKI GSX-R1100, SUZUKI GSX1300R Falcon, SUZUKI GSX1300R Falcon, SUZUKI GSX-R1100, SUZUKI GSX-R1100
Replace reduced OEMRear Disc
OEM Rear Disc had exceeded its use limit and was replaced
I'm happy with the Touch, it's more solid than the wavy and reduced OEM.
View detail
Fits: YAMAHA TRACER9 GT, HONDA CB1100EX, HONDA CB1100EX E Package, HONDA CB1100BLACK STYLE, HONDA CB1100, HONDA CB400SF, HONDA CB400SB, HONDA VTR1000SP-1, YAMAHA FAZER8, HONDA CRF1100L Africa Twin Adventure Sports, HONDA CB1100, HONDA CB1100 typeII, HONDA CB1100 typeII, HONDA CB1100 typeI, HONDA CB1100 typeI, HONDA CB1000SF, HONDA CB1000SF-T2, SUZUKI BANDIT1200 S, SUZUKI V-STROM1000, SUZUKI SV1000
Replace Red with Golden Pad
I have not been able to drive yet because of the rain, but I changed the pad as well as the Caliper OH!
I'm looking forward to running it. ('∀ `)
View detail
Fits: HONDA CB400SF HYPER VTEC SpecIII, HONDA CB400SF HYPER VTEC SpecII, HONDA CB400SF HYPER VTEC Revo, HONDA CB400SF, HONDA CB400SB, HONDA CB400SB, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER FOUR, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SB, HONDA CB1300SB, HONDA CB1100EX, HONDA CB1100EX, HONDA CB1100EX E Package, HONDA CB1100EX BLACK STYLE, HONDA CB1100BLACK STYLE
Nice...
I replaced it with a Sintered pad because the Brake squeal would not go away and it was less expensive and seemed more durable.
The pad before replacement came with an unknown manufacturer, so there is no comparison, but it works and does not squeal as usual. 。
Control is much better than I expected, and the effectiveness changes with the amount of force.
It seems to be a bit aggressive to Rotor, which is a concern, but it was a good decision to replace it.
View detail
Fits: HARLEY-DAVIDSON FXLRS SOFTAIL LOW RIDER S, HARLEY-DAVIDSON FXLRST SOFTAIL LOW RIDER ST, HARLEY-DAVIDSON FXRST SOFTAIL LOW RIDER EL DIABLO
Pull back easily
It is just right to be able to pull back easily without changing wiring.
If this isn't enough, you could replace the Riser and raise it.
It's cheap and helpful.
View detail
Fits: YAMAHA YZF-R25, KAWASAKI Ninja650, Others , HONDA VTR1000 SP1, HONDA VTR1000 SP2, HONDA VFR800, HONDA VTR250, HONDA RVF400, HONDA VFR750R, HONDA NC700X, HONDA NC750, HONDA GB350S, HONDA NC700S, HONDA CBR1000RR-R SP, HONDA CBR929RR, HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR650R, HONDA CB650F, HONDA CB650R
It is not a pure Black.
The color looks a little brownish rather than black in the right light. It is super easy to install. I think you can install it by yourself, but if you don't have the knowledge to remove the OEM bar end, you might want to ask a shop to do it for you. The included Inner Weight is a few Grams lighter than the OEM. View detail
Less blurring.
[How is it used?
Mounted on GSX-S750
Was the one you received as per Image?
As per Image. Firm and solid.
It is lower, but the visible range is the same as OEM etc.
If I could adjust it well, I could see a wider area than the OEM,
I'm not very good at adjusting Mirror ….
Was the installation difficult?
Installation itself is simply a matter of turning the hexagon.
How was your experience with it?
OEMMirror was getting scared fast, so I replaced it and it is better.
However, this too starts chattering at about 120 km/h.
[Included Parts:were they on?
Screws necessary for installation are included.
Right is also Opposite Thread Screw.
[Was there anything that disappointed you?
When you are scared, you really feel like you can't see anything.
Other items that would be helpful
Installation Point or hang
Right makes Washer a Quantity:1 pc. with a masquerade
There is no longer any interference with the OEM's Brake master.
But I don't feel like I'm stopping with Snap.
important point
Quantity:Pair (for Left and Right) Quantity as the same:2pc. When I purchased the Set, it was Shape of Right & Left Differ number.
Screw lock agent required.
View detail
I am satisfied with the quality function design!
I am very satisfied with the quality and functional design of the product, which also cancels out the vibration from the handlebar and ensures good rearward visibility! View detail
Fits: HONDA DAX125, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA SUPER CUB110PRO
Mounted on CROSS CUBJA60
Installed for dress-up and ease of gripping.
My hands are on the Large size, but OEM is a bit far away and my hands get tired after riding long distances, so I bought this. I am glad I replaced it.
View detail
Fits: HONDA PCX, HONDA PCX160, HONDA MSX GROM, HONDA MSX125SF, HONDA MSX125, HONDA GROM, HONDA DAX125, HONDA MONKEY125, HONDA ADV160, HONDA CT125
Purchased in conjunction with MONKEYLowdown
Purchased this product because I lowdown my MONKEY125.
The texture is great and the height is adjustable.
View detail
I'm actually a Slider...
I guess the real purpose is to Slider in the event of a fall.
We purchased the Clutch cover as an anti-scratch protection for shoes on the Ring part of the Clutch cover.
So I'd like to see a product with a thinner thickness, and
I would like to see more colors, especially blue.
View detail
Just fit like OEM Product
I purchased again this time.
It is mechanical and looks great on the air-cooled CB1100. It is not accurate, but it allows you to check the degree of oil temperature rise and has the effect of preventing overheat in the summer,
View detail