Reviews
Quite a sense of Upgrading!
The installation required removing the rear of the Exhaust System, but either way, the ScrewQuantity:The work was only increased by 2pcs, so it took less than 30 minutes.
The appearance of the upgrade is great, the feel with the tire is even, and the precision is perfect.
Basically, we will not run in the rain, but we will consider installing a Fender Eliminator depending on how far we can prevent Tunnel and other springs from splashing up.
View detail
Cool!
It looks so much better!
It is easy to install and looks great!
View detail
it's recommended
I think the price is right for everything.
Plus it looks a lot better.
View detail
It'll be cool!
I installed it for its appearance!
I am satisfied with the style and the large size!
But the removal of the OEMBlinker is Large strange!
I warmed up the rubber part with a dryer and removed it by prying with a slotted screwdriver.
Note that Blinker is also thin and easily broken!
Reflector is sold separately!
View detail
Rear suspension contamination can be reduced.
The rear suspension used to get mud splashed on it when driving in the rain, etc. After installing the Inner fender, the mud splashing has been reduced. However, the Inner fender has not been able to completely protect the rear suspension from mud splashes. Installation was easy with the help of the instruction manual, and I like the fitment as if it were a NORMAL part. View detail
Fits: KAWASAKI NINJA H2SX, KAWASAKI NINJA H2SX SE, KAWASAKI NINJA H2SX, KAWASAKI NINJA H2SX SE
SPEEDRACarbon rear fender
I have installed the SPEEDRACarbon rear fender on my 25R and Z900RS and there was no distortion and the mounting holes did not have much gap, so I bought it for my H2SX. As for the installation, I had to install the OEM color in the upper mounting hole and fix it with the OEMBolt, but the hole was small and there was a gap from the center, so I had to use a semicircular bar to adjust the large hole position. But it was successfully installed. The other holes did not need to be enlarged and there was little distortion.:Pair (for Left and Right) The adjustment of the position of the material was done without any special attention.:Twill Weave Carbon glossy and cosmetic and looks better. The mud repellent effect may not be so promising…. View detail
Looks are not for the faint of heart!
I think there are many cases where the Fender is replaced with an external Fender on custom models such as ESTRELLA and SR.
The purpose of dress-up tends to be more important than the appearance.
Is that really all there is to it?
Motorcycle Rear Fender
. . attached to the top of the Tire 。 The front tire is attached to the front tire. "Front Fender" The Rear tire is attached to the Rear Fender.
[Effect]
◎Prevents mud splashing and foreign objects from being caught in the tires and wheels. 。
Maintaining the strength and rigidity of the ◎Body is also an effective effect.
◎Parts protection. It is effective in reducing dirt. Effects such as Guard, especially for Suspension and Swing Arm, etc. 。 Protection around Radiator if water-cooled or something.
This time, I purchased an ESTRELLAClassic fender by CHIC DESIGN.
I simply liked the way it looked, but there were several Merits that made this Fender, so I'll list them here.
【good point】
◎The use of durable and strong* FRP.
*FRP is, [F]. In Fiber [R]. Enhanced. [P] Plastic, generic term 。 Fiber-reinforced plastic (FRP) is a combination of plastic and various fibers, such as glass fibers, to increase strength. 。 Excellent lightweight and durability. → Expect strength and durability. Can be used for two people.
Tail lamp and License Plate Holder are integrated → Tail lamp and License Plate Holder are stronger than those attached to the Fender. And the Tail Lamp is equipped with a reflector for safety.
◎The shape of the tire is designed to cover the tire firmly, so it is expected to prevent mud splashes and foreign objects from being caught in the tire.
◎Tail lamp wiring is already processed and can be installed on the vehicle body side harness as a couplet-on.
◎Because the Rear area is now stronger, there is no need to worry about loading luggage around the Rear area as well.
[Bad point]
Rear blinker requires drilling holes on the side of the Fender.
Solved by buying a separate Tail Blinker Bracket.
The only weak point of FRP is ultraviolet rays. If you have the budget, it would be better to paint it as a countermeasure.
Fender is deep, so serviceability will be poor. 。
Classic fender with Round Type Tail Lamp and License Plate Holder integrated.
The slightly flared shape toward the end part gives it a sense of massiveness and high-quality presence.
I would like to recommend it because it is not only aesthetically pleasing but also materially functional Parts.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA SMAX (SG52J), YAMAHA SMAX (SG28J), YAMAHA SMAX (SG271)
It will be Stylish!
[How is it used?
It was adopted as we proceeded with the dress-up of various areas.
We have asked Motorcycle shop to install at BigPit inService.
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
It looks very good and I am satisfied with it.
[Points to note]
It is a little bit difficult to install, as it requires an OEM Fender cut. If possible, it would be better to ask the Shop to do this for you.
How did it compare to other products?
I thought it looked more stylish and better than other Manufacture's products.
View detail
Surprisingly good ?????
I'm not really interested in dress-up, and my theme was to keep the NORMAL cuteness as much as possible, but my friend told me that the tongue in the back is Parenthesis bad. View detail
Fits: DUCATI Monster 1200, DUCATI Monster 1200S, DUCATI Monster 1200R, DUCATI Supersport, DUCATI Supersport S, DUCATI Supersport 950, DUCATI Supersport 950S
If you value functionality
There are stones and mud to the back.
I was just trying to think of something better.
I found it and bought it.
It costs 11,000 yen, but it is very cheap.
If it is not imported FOR VEHICLE, then about $2,800 is a reasonable texture.
The installation does not make Parenthesis better, though,
For function-oriented and discrete use, ….
View detail
Difficult to install
Installed to prevent dirt. Selected because it was a good looking shape similar to SBK among various companies.
It is made of FRP and weighs 390g.
There are Small scratches and scuff marks on the surface as it is.
There were no nests or sink marks, so I lightly sanded the paper with #1000, sprayed it with a buffing compound, and painted it with 2-component urethane.
The OEM Fender has a hose through the hole, so it cannot be removed without removing the Caliper or cutting the Fender.
Cutting the inside is not noticeable, so it is cut and removed.
The collar had to be attached on the inside, so it was difficult to align it, even more so since there were so many things to overlap since I had also attached an under rear fender.
And since the collar for the front hosebracket is not included, I am worried that it might get twisted when tightened.
Sponge is included to prevent the bracket from rubbing, but it is better to have a separate rubber plate since it is likely to be scuffed and ruined soon.
The shape is good, but it takes a lot of care to install.
View detail
It was not good.
The product is good, but the Instruction Manual is not beginner friendly.
Also, the screws in the "Included Parts:" were different from those in the Instruction Manual, and some were missing, making installation quite difficult.
View detail
Fits: YAMAHA Tracer 9, YAMAHA Tracer 9 GT, YAMAHA XSR900
XSR900 2022- Requires considerable modification for use
I bought it because it is compatible with XSR900 2022-.
The position of the mounting holes, etc., are considerably off.
RearThailandia is about to be contacted while driving.
So I gave up using it.
View detail
Inexpensive but well-made product.
Purchased to make the OEM's wild Fender SMART.
I'd say it's one of the less expensive Fender Eliminator Kits.
I think the product itself is well made and looks good.
I wondered about License lamp Wiring.
Both have two wires, one red and one black, but the instruction manual for KIJIMA's wire is written to connect them in the opposite direction.
Is it some kind of diversion? If you know, I'm pretty sure they should be the same color as the OEM….
Also, the bolt used to attach the Kit to the car body is a hexagonal button bolt with a round head,
It is easy to lick, so regular Bolt is considered better.
Other than Wiring and Bolt, I think this is a great product.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja ZX-25R SE
feeling satisfied
The heavy feel of the rear is gone, and the look is more resilient! The slit on the bracket and the ACTIVE stamp on the right side are also good accents.
We had some difficulty in porting Blinker.
View detail
Was good
Fender had been hit by a stepping stone.
I bought it to hide scratches and to protect against stepping stones.
Quantity:It's even better when you put it on as a Set.
Slightly more classic feel.
I am also satisfied with the design!
View detail
It was definitely hard.
As mentioned in other reviews, Screw is hard and you will lick it at worst.
So it was easy to get it with the 3rdDriver!
The rest can be done by following the Instruction Manual!
View detail
For FROM 200!
I installed this on a Van Van 200, and it looks like I added it to the OEM mudguards, I was going to install it where the holes are on the License Plate, but it was too short and ugly, so I drilled out the mudguard holes and installed it much lower. I was told by others that it looks tacky, but please don't laugh at me, as it is my own personal world.
I also chose the mudguards for the front side. vanvan200Front Fender is too wide, so it was just right for the rear side. I changed the shape of the front and rear mudguards. It is full of nostalgic feeling.
View detail
Can be installed without modification on the '24 model, but the side reflector needs to be relocated.
This will be a reReview
In my previous post, I wrote that there is no problem to install the side reflector on the 24-year model, because the angle is Japanese Vehicle Inspection Correspondence. However, due to the revision of the Motorcycle Safety Standards, side reflectors are mandatory for new model vehicles certified by the Japanese government after September 2023.
The 24-year ZX-6R is compliant with this safety standard, and since the side reflector is installed on the rear fender, if the Fender Eliminator Kit is installed, the side reflector will not be installed, and the vehicle will not pass inspection due to non-compliance with safety standards when used on public roads. If the Fender Eliminator Kit is installed, the side reflector will not be installed, and the vehicle will not pass inspection due to non-compliance with safety standards when used on public roads.
Since it seems that it is only necessary to have it on either the front or rear, I am arranging for the side reflector to be relocated to the front fender as in the for International Model.
View detail
Fits: SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword), SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword)
OHNO SPEED OHNO SPEED BIG Fender Eliminator Kit B
The tools, ETC, and rain gear have been installed EXACTLY. I used to be afraid that the rain gear would fly away from the Seat on the highway, but now that I have this, it fits under the Seat. I wish I had purchased it earlier. View detail