Reviews
Small in size, but large in appearance (installed on a 24-year model)
When purchasing the ZX-6R 24th model, the company considered converting the plastic parts to carbon to improve the quality of the appearance.
After comparing images and videos with the 2011 model, we determined that it could be used for the 24th model and purchased it.
Since CR-1Coating was scheduled to be installed as part of the car delivery maintenance, we brought the car to Kawasaki Plaza to have it installed in its installed condition, and the installation was done without any modification.
There were some comments to Review about poor Fitting, but I have no problems with mine.
Although these are small parts, I think they have a lot of impact in terms of appearance.
View detail
Front fork of XR1200
As the Title says, it was installed on an XR1200 front fork.
I had originally installed the Kellerman Blinker, so I didn't have any problems. The quality is high, but still the price is as well….
But it is also highly satisfactory.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CB1000R, YAMAHA YZF-R1, YAMAHA MT-10, YAMAHA YZF-R6, YAMAHA MT-09, YAMAHA MT-09 TRACER, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA MT-07, YAMAHA XSR700, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA MT-03, SUZUKI GSX-R1000, SUZUKI V-STROM250, SUZUKI GSX-R600, SUZUKI GSX-R750
Master cylinder cap
Easy to install and good quality. Cheaper than other manufacturers. View detail
It can be installed on the '24 MODEL without any problem.
Required As I was switching to a '24 model ZX-6R, I was wondering if the exterior parts could be used for the '23 model, as far as the changes from the '23 model were concerned. I was convinced that they were the same in shape, so I went ahead and got them to have CR-1Coating installed, and asked Kawasaki Plaza to install them along with the vehicle maintenance.
As a result, they were able to install it without any modification.
The Swing Arm has a fixed part on the back, so it might be a bit odd if it's a DIY project.
View detail
Small parts, but looks like large parts (can be installed in 24 years model).
After comparing images and videos of the '24 and '23 MODELs, I wondered if it would be possible to divert it to the '24 MODEL as well. I asked Kawasaki plaza to install it along with the vehicle maintenance.
As a result, they were able to install it without any modification.
I was concerned because some reviews said the Fitting was not good, but the one I fitted seems to be fine.
Although these are small parts, they give a very different impression when installed.
View detail
It can be installed on the '24 MODEL without any problem.
As I was changing to a '24 model ZX-6R, I was wondering if I could use the same exterior parts as far as the changes from the '23 model were concerned. We compared the images and were convinced that they were the same in shape, so we went ahead and obtained the CR-1 Coating to have it installed and asked Kawasaki Plaza to install it along with the vehicle maintenance.
As a result, they were able to install it without any modification.
The cable is fixed without any problems.
If possible, I would like to see Long Type developed as well.
View detail
Lighter weight due to carbonization (can also be installed in 24-year model)
The 24 model ZX-6R has no major differences from the 23 model in terms of front face, meter changes, and compliance with gas emission regulations, and even when comparing videos and images, I felt that there were few changes in the others. I asked Kawasaki plaza to install the coating with the car delivered to me for maintenance.
As a result, they were able to install it without any modification.
NORMAL is made of Gold genus, so Material:Carbon will be used to reduce weight.
I thought it was well thought out with the heat shield tape attached to the reverse side of the product.
Fitting is good with no interference with Exhaust System or Cowl.
View detail
Fits: DUCATI 916, DUCATI ST2, DUCATI MONSTER400, DUCATI MONSTER900, DUCATI MONSTER750, DUCATI MONSTER600, DUCATI MONSTER620, DUCATI 900SS, DUCATI 748
Good vibes
It was installed without any problems.
The screw and lever mechanism is GOOD because you can adjust the grip to your liking.
View detail
Certainly the holes don't match.
The holes do not align as shown in the previous Review.
It is made to be fastened in three places, but it can be done by cutting the holes on the exhaust system side with a sander and fastening it in two places in the front and rear. It seems to be strong enough, and the NORMAL cover looks lame. It is a good item for those who are considering to use Slip-on Silencer for vehicle inspection and are tired of this cover because it is too shabby.
If you don't mind cutting and shaving, I'd buy it.
View detail
I was waiting for the GSX1300R HAYABUSA22~ footpeg!
Since there was no footpeg that fits to my GSX1300R HAYABUSA, I painted the OEM footpeg in Gold!
I am satisfied with the look, texture and Large change.
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI 1400GTR, KAWASAKI ER-6F, KAWASAKI ER-6N, KAWASAKI Versys, KAWASAKI Versys1000, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI Z800, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZX-10R, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZX-9R, KAWASAKI ZZR1200, KAWASAKI ZZR1400, KAWASAKI ZX-14R, KAWASAKI NINJA H2 SX SE
It's not about looking good… hmm?
The OEM Tandem Footpeg is similar in shape to any other Motorcycle and is very crappy, so I replaced it with Speedra's Tandem Footpeg and wow! It makes you think "W! View detail
Used for side cowl
Changed from Silver to Black, good because it is less noticeable! View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CB1000R, YAMAHA YZF-R1, YAMAHA MT-10, YAMAHA YZF-R6, YAMAHA MT-09, YAMAHA MT-09 TRACER, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA MT-07, YAMAHA XSR700, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA MT-03, SUZUKI GSX-R1000, SUZUKI V-STROM250, SUZUKI GSX-R600, SUZUKI GSX-R750
Master cap
One point Green Light is good. View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA 400X, HONDA CBR250R, HONDA CBR400R, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M, HONDA CRF450L, HONDA CBR500R, HONDA MONKEY125, HONDA CB150R, HONDA CB300R, HONDA CB500X, HONDA ZOOMERX, HONDA DIO110, HONDA glom, HONDA CBR250RR, HONDA PCX125 JF28-1000001-1099999
Best Matches
It matches the color of the car body and looks like an OEM product. I am satisfied with the color match. I could install it without any modification, even though our Motorcycle is not listed in the list of applicable vehicle models. View detail
Fits: YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3
I was satisfied with the vibration suppression effect.
I was concerned about the vibration of the handlebar, so I bought it as a dress-up as well.
I used to feel that my hands were numb and it was hard to operate my smartphone while touring, but after installing the device, I felt a little numbness even after riding for half a day. After wearing it, I can ride for half a day with only a little numbness.
I really like the texture of the look and the non-monochromatic design.
However, I am a little concerned that the SPEEDRALogo is a little easy to get dirty. Since it is such a good product, I would have liked to have seen some detailing such as coating over the Logo.
Compared to other companies' products in terms of simple grams, some of them are heavier and less expensive, and I feel that they are slightly inferior in terms of cost performance, but I did not regret buying Items in terms of the sense of ownership and satisfaction I got from it.
View detail
Fits: HONDA VFR800, HONDA Rebel 250, HONDA Rebel 500, HONDA CBR400R, HONDA CBR650F, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA 400X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB650F, HONDA CBR1000RR, HONDA NM4, HONDA GROM, HONDA CBR500R, HONDA CB500X, HONDA VFR800XCROSSRUNNER 125, HONDA CBR1000RR, HONDA CBR250RR(2017-)
Recommendation for those who care about the appearance.
I applied it on my CB400SB, and it is an excellent shape, and I was able to apply it beautifully without any difficulty, just keeping in mind to apply it carefully and slowly. I think the adhesive power of this capPad is weaker in winter than in summer. View detail
Fits: YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09 To Racer, YAMAHA FJR1300, YAMAHA FZ1FAZER, YAMAHA FZ6-SFAZER, YAMAHA FZ6R, YAMAHA FZ8, YAMAHA XJ6DIVERSION, YAMAHA XSR900
Looks like a Large thing.
Replaced the Brake master cylinder cap, which is functionally fine as long as it is not leaking, but I bought it in the hopes that it would look better than anything else. In that respect, it is a zero. However, the price is high, but I was worried about cheap ones, so I compromised. I am glad that the included Screw is a hex Type. Because the original +Screw was about to be licked. I am satisfied overall. View detail
Handlebar Brace
I installed it to attach the Smartphone Holder. Installation is easy. I think this is a better choice if you are going to attach a Smartphone Bracket, as the Gold amount is not that different. View detail
Fits: SUZUKI V-Strom 650XT, SUZUKI V-Strom 650, SUZUKI V-Strom 1000XT, SUZUKI Vstrom 1000, SUZUKI GSX-S750, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-R1000R, SUZUKI GSX-R1000
Tank cap protection & dress-up
I bought it because it seemed to have the largest protective area among many products of the same et cetera.
It is also reasonably thick.
It is not such a difficult task, although care must be taken when attaching the outermost part.
Not only is it protected, but it also changes the look and feel of the LargeKiku, making it a highly satisfying Custom.
View detail
Really nice dress up accessory
I chose the titanium colour option & I wasn't disappointed. Even in the packaging it looked amazing. The product has a decent weight to it & is well machined. I do have one gripe.. Fitment is very tight and I had to use a mallet & a bit of physical effort to whack both caps into place. As a result; a small amount of the rubber O-ring (that is fitted to the cap) was stripped off (the cap itself & bike were undamaged) -I don't think it'll be an issue for waterproofing, but I doubt those caps are coming out any time soon. Please note: if it wasn't for the struggle to fit the caps, I would have given this product 5 stars. View detail