Reviews
with child-fixation
The Rear Master Cylinder Cup's Fixing Screw was rusty and old, so I bought this one so I don't have to worry about rust.
It looks good, and being aluminum, it's not suitable for fixing that requires strength. The color of the corners peels off when tightening, so you have to be careful when tightening.
View detail
quality
The quality of the Wiring and the installation of the Crimp are fine.
It's a Large change help that it's sold at this Gold amount.
Additional modifications are required depending on the User, but I purchased this product with the understanding that I would be able to install it without any difficulty.
If you're a pain in the ass, buy Kit!
View detail
So so
It is structurally difficult to see due to vibration and other factors, although it is suitable for off-road driving purposes and applications.
It would be appreciated if you could adopt a Nut that prevents loosening as a vibration countermeasure. I am replacing it myself.
View detail
Moderately
It is structurally difficult to see due to vibration and other factors, although it is suitable for off-road driving purposes and applications.
It would be appreciated if you could adopt a Nut that prevents loosening as a vibration countermeasure. I am replacing it myself.
View detail
Fits: YAMAHA Serow250, YAMAHA XG250 TRICKER, YAMAHA SEROW225 WE
It will look better.
Timing of the Chain S/P ROCKET replacement was used to change the Chain from the standard 428 Size to 520 Size.
This product exists because SEROW's Sprocket is a little special, but it looks more custom than NORMAL.
There is a similar product, PCD by XAM, but since we chose SUNSTAR for the Sprocket, we somehow avoided products from competing manufacturers, and as a result, we chose DRC's product. (Process of elimination)
Perhaps XAM would be JAPAN and the quality is better than DRC. That said, I do not feel that the quality of this product is particularly inferior. I guess the point is a matter of taste. I also prefer the appearance of this one.
As for the assembly, those who have experience in replacing Sprocket should be able to work on it without any problems.
I have no problem with the accuracy of the hole position etc. without any wobble, although the quality is mentioned in ↑.
Since the OEMSprocket of SEROW is quite expensive, it is possible to use other brand products or other models (SRXetc.) which are inexpensive from the next exchange, and 520Size which has many choices of chain can be used. However, considering the replacement span, we may not be able to say that it is cost-effective.
However, it looks better now that Parenthesis has been improved.
View detail
Required I want a loosening Nut for Off use with lots of vibration!
The main point of this product is that the mirror can be folded, which is an obstacle when driving off-road, and I do not ask for much else. If the manufacturer would do so, the evaluation would be much higher. View detail
I want a loosening Nut for Off use with lots of vibration!
The main point of this product is that the mirror can be folded, which is an obstacle when driving off-road, and I do not ask for much else. If the manufacturer would do so, the evaluation would be much higher.
The availability of the Opposite Thread Screw for Yamaha is Large.
View detail
Fits: YAMAHA YZ85, YAMAHA YZ65, YAMAHA YZ450F, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ125, YAMAHA WR450F, YAMAHA WR400F-450F, YAMAHA WR400F, YAMAHA WR250F, YAMAHA TENERE700
turn quickly
Cheap is good.
If you fall, it bends easily.
If it falls down twice, it is definitely unusable.
So, it may be better to buy a more expensive and bulky Material.
Assuming you don't fall over.
I think this product is fine.
View detail
Construction is easy
It was easy to follow the instruction manual. If you fail, you can always use the spare Quantity:It says "1 Set of 2pc. I am sure that the Quantity:1pc. did not peel off the surface and a spare was used.
I could see why. I think it is better to have an effect than not to have an effect.
View detail
Installed on a WR250R
I replaced the taper bolt because it was necessary when replacing the Sprocket, but I felt that it was a little too easy to lick the tool, so I think I'll use a different bolt next time. View detail
Grip Fixing
It is used in conjunction with Grip replacement.
The price is reasonable and the length of the product is good for fixing.
View detail
Fits: SUZUKI DR350, SUZUKI DR250R, KAWASAKI KLX150, KAWASAKI KLX150, KAWASAKI KLX125, KAWASAKI D Tracker 125, SUZUKI DR350, SUZUKI DJEBEL250 XC, SUZUKI DJEBEL250
high
The price is high.
For this kind of product, I would want it to be in the 5,000 yen range.
Changed from OEM's poor Peg to this one.
The wider it is, the easier it is to do standing. It is also good that it is not slippery.
I still think it would be better if the price was a little lower.
However, it is more reliable than the ones that cost 2,000 yen on Amazon.
Recommended
View detail
Fits: KAWASAKI KDX250SR, KAWASAKI KLX250, KAWASAKI KLX250ES, KAWASAKI KLX250SR, SUZUKI 250SB, SUZUKI Jebel 250, SUZUKI DR250S, SUZUKI DR250R, SUZUKI RMX250S, SUZUKI TS200R, KAWASAKI D tracker, SUZUKI DF200, SUZUKI DR125S, SUZUKI DR200, SUZUKI TS125 Hustler, KAWASAKI D Tracker, SUZUKI TS125 HUSTLER, SUZUKI DR200, SUZUKI DR125S, SUZUKI DJEBEL250
Used by D Tracker
[How is it used?
Mounted on D Tracker.
Applications:Motard race, FlatDirt
Used for about 2 years. Many times overturned.
Was the one you received as per Image?
As shown in the image. Since my hands are so small, I needed a lever position adjustment mechanism and a short lever to attach the hand guard.
Was the installation difficult?
The installation is not difficult, but it does require some tools and some adjustment of the clutch. However, since the lever replacement is an introductory step for Custom, if you are well informed, prepared, and have the tools, you will be ready for any battle.
How was your experience with it?
TRAIL (MOTARD) The size and lever position adjustment mechanism were good, but I felt that it slipped and the operation feeling was not so good.
After installing this, I regretted that I should have used ZETA's Pivot lever. I regretted it.
Also, I have small hands. (Glove sizeM) The OEM lever is often difficult to use, but this product allows you to adjust the lever position to a position where you can operate it properly. The ability to operate the lever firmly leads to safe riding, so we recommend that those who have trouble operating the lever because their hands are too small should introduce products with adjustable lever positions, including this product.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Point and hang of installation
Glasses Wrench in Size8 or 10 (Spanner) Is Quantity:You need to be prepared because you will need 2pc.
After installation, lubricate the clutch lever with grease. (Lithium, Urea, Siliconetc.) However, by applying a thin layer, dust adhesion can be kept to a minimum.
If you don't like dust sticking to your fish, you can apply dry lube such as Kure's Dry fast lube, WAKOS' Bidas Dry, etc. on a regular basis.
Dry rubs may be a better choice for MOTARDs with Dirt driving.
View detail
To prevent mud clogging
I bought this to prevent mud from getting stuck between the bottom of my car's engine and the skid plate. I haven't ridden the car that much since I installed it, but I think that filling the gap makes it harder for mud to get in. I think it will be more effective in situations like Muddy's Race, where mud gets stuck everywhere. View detail
You need to research and buy carefully.
I bought it because it is a pipette format not Syringe and I thought it would be easier to work with one hand. However, I could not use it.
Because the length of the Pipe part is not 200mm, it did not work well on my Motorcycle which is specified 220mm oil surface.
Other than that, I have no problems with it and I'm sure it's very easy to use! (Imagination) I would like to expect the extension of Pipe as it is by all means because it has become a shameful result.
View detail
It's solid.
[How is it used?
I use it for my regular Chain cleaning.
Was the one you received as per Image?
The texture was more solid than Image.
The weight is more than I imagined when I held it, and the handling is good.
How was your experience with it?
In the past, I've used the thin Brush and Tooth Brush that come with the extras.
Compared to those, it's easy to clean two surfaces at once.
I also felt that it was easy to clean because it was easy to apply force.
[Points to note]
As others have written, the ends of the hair are a little short so it is hard to clean the back of the Chain.
How did it compare to other products?
The Type that is sold in the street shop has a tail that I don't know how to use on the other side of 3 sides Plus, but compared to them, I was very satisfied because it was written DRC.
In addition, I think that the cost performance is good because I can exchange the brush itself when I use it to some extent though other brushes are possible.
View detail
Buy something you've lost
I bought this because I lost my previous spring hook. I chose the DRC one because I am an off-road motorcycle rider. It is very useful for me because of its straight shape and easy to put on and off the chamber. View detail
A little heavy.
I wanted to buy Takatsu's Trial mirror, but it was discontinued, so I bought this one. I also used it for my previous motorcycle, but after a long time I took it in my hand and thought, "Was it this heavy? Since there is no mounting base in the Racer, it is a material of M10.:I bought AluminumClamp from Rakuten and installed it.
As far as the product is concerned, it works well enough.
View detail
Fits: HONDA CB400 SUPER FOUR, HONDA CB1300 SUPER FOUR, HONDA CB400 SUPER BOLDOR, HONDA CB1300 SUPER BOLDOR
Dust is the …
It's as difficult as putting it on a cell phone screen.
Dust is in … two sheets each, so that's good.
View detail
Fits: HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA FS450, HUSQVARNA TC125, HUSQVARNA TC250, HUSQVARNA TE125, HUSQVARNA TE300, HUSQVARNA TE310, HUSQVARNA TE400, HUSQVARNA TE449, HUSQVARNA TE450, HUSQVARNA TX125, KTM 125EXC, KTM 125SX, KTM 125XC-W, KTM 150XC, KTM 150XC-W, KTM 200EXC, KTM 200XC
NORMAL was broken and replaced
I ride a HUSQVARNATE 250.
I usually ride on forest road touring and a little more intense course.
I found it at DRC when I was looking for Other Brand Product because OEM footpeg was broken when I fell and it was troublesome to order OEM. I ordered it. The area is wide and Boots is easy to grip and Balance is very easy to take Balance.
The delivery time was fast and custom, so it was a very good purchase...
View detail