Reviews
For brake hose
I bought this at the same time as the Clamp, but why it doesn't have a split is a mystery to me. I used it with Cutters. It is good if the one with the interruption is sold. View detail
Radioponization.
It's a must-have for hose extension when changing to Radial master. By extending the hose, you can smooth the handling of the hose and it will not affect the handlebar operation. It's simple to look at and does not affect the appearance. View detail
It's easy to make into a radiphone, but
Ordered to install a full-length Φ14Radial master cylinder on the CT125CT110 HUNTER CUB for the purpose of hose extension.
Just fit is a good way to get a neat measurement and put in a Mesh hose or UniversalRubber hose, but ……
Easy to think that with just a little extension, well, anything can be done.
The direct screw-in type only comes out in a straight line, making it impossible to adjust the direction at all.
This is the only thing I liked about the old Banjo bolt system.
Well, it turned out to be a dumb way to go around, but we got it installed with no problems, so that's good.
Otherwise, no problem.
View detail
Fits: BMW R1200R, BMW R1200RS, BMW R1200GS Adventure, BMW R1200GS, BMW R1200RT
Custom look only
NORMAL's Material:PlasticCover itself is lightweight, so it's totally customizable in appearance only!
If you are replacing the High Up Torque Rods with the High Up Torque Rods, the width will not match, so it will take a little bit of brute force to install the rods.
I suppose the shape makes it unavoidable, but it would have been better if it was a little cheaper.
View detail
Used in the installation of a mesh hose to a SEROW250
I used it to install the mesh hose to my SEROW250
It's a nondescript Rubber I hope it's a little cheaper
Banjo cut in with Scissors, combined with a Hose that can't be removed I tightened it up with Tie Wrap and then installed it on the car body So far it hasn't come off
View detail
A perfect fit for the OEM HoseBracket
The external shape was perfect for the OEM hose clamp!
As an afterthought, the Hose is already rubbed and Wound is already in
Why didn't I come across it a little earlier?
It's essential if you're going to mesh hose!
View detail
Fits: BMW R1200RT, BMW R1200GS Adventure, BMW R1200GS, BMW R1200RS, BMW R1200R
I'm building this place out of Carbon
The Left Side of the car body is not very noticeable if you tilt it in STAND
And the Brake hose cover on top of the shaft drive is well made of Carbon I was going to build it
It doesn't feel right with a single body, but by combining it with other Carbon parts, it will be unified A sense of feeling comes out (^^)
View detail
ACTIVE Hose Clamp Rubber
I want to share a review about the purchased product. This is the rubber hose clamp from ACTIVE. After replacing factory brake hoses with new reinforced hoses on which there were no rubber clamps. The old rubber clamps turned out to be very large. And I had to buy new rubber clamps. When I received new clamps, I immediately put them on my motorcycle. Everything went well and perfectly fell into place. The goods are of excellent quality. Quick installation. I recommend . Thank you . View detail
ACTIVE Hose Clamp Rubber
I want to share a review of the purchased product. This rubber clamp from the company ACTIVE for brake reinforced hoses, which I bought for my SUZUKI. After the replacement of the factory brake hoses, new reinforced hoses appeared, on which there were no rubber clips. I had to buy new rubber clamps. When I received new clamps, I immediately put them on my motorcycle. Everything went well and perfectly fell into place. Goods of excellent quality. Quick installation. I recommend . Thank you . View detail
ACTIVE Hose Clamp Rubber
I want to share a review of the purchased product. This rubber clamp from ACTIVE for brake reinforced hoses. After the replacement of the factory brake hoses, new reinforced hoses appeared, on which there were no rubber clips. I had to buy new rubber clamps. When I received new clamps, I immediately put them on my motorcycle. Everything went well and perfectly fell into place. Goods of excellent quality. Quick installation. I recommend . Thank you . View detail
From OEM's Separator from here
Used for ZrX1200R
Compact than Large Type Separator such as OEM
It also looks GOOD
For Custom-oriented people, we recommend exchanging with Brake hose
View detail
ACTIVE Hose Clamp Rubber
Hey . I want to share a review about the purchased product. This is the rubber hose clamp from ACTIVE. After replacing factory brake hoses with new reinforced hoses on which there were no rubber clamps. I had to buy new rubber clamps. When I received new clamps, I immediately put them on my motorcycle. Everything went well and perfectly fell into place. The goods are of excellent quality. Quick installation. I recommend . Thank you . View detail
The Hose clamp section is finished like an OEM (^_^)
【What made you decide the purchase?】
- I'd like to fix Mesh brake hose with NORMAL's Hose clamp
【How was it actually used?】
Purchased Hose clamp rubber 14 mm in outer diameter according to the inside diameter of Hose clamp.
Since I installed it after incorporating Hose, I installed it with a notch.
It installs so as to suppress it with Hose clamp, so even if there is a slit, it is used without problems.
Since NORMAL's Hose clamp can be used as it is, even after exchanging Brake hose for Mesh Type, the Hose clamp section is finished like an OEM (^_^)
【Mounting was difficult?】
It was not particularly difficult.
【Please tell me the installation point and hang】
If you install Hose clamp rubber before installing Banjo adapter in Hose, I think that it can be installed without cutting.
[Is there anything I was disappointed about?]
Nothing in particular.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I think whether there may be a Type with a slit from the beginning.
【Have you compared items?】
Nothing in particular.
[Others]
It will be the Motorcycle that I used to ride, but it seems that ClampRubber here is still in use.
* "The 12th Impression Con test" (https : / / www. webike. net / campaign / 2017 / 11 / 20171201_impression_contest / ) I am writing Impre with reference to the Template that was prepared at.
View detail
Hose clamp rubber
When exchanged for Mesh hose I purchased because there is a gap when NORMAL's Hose clamp.
I noticed before ordering that there was multiple Size so I got the necessary Size without difficulty.
Quality etc. There is no problem, but the price is a bit expensive
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Large I'm satisfied..
OEM Product's 4 way Joint was expensive, just purchased as we were selling with Wa Big with good Timing!
Unlike Joint of Second Type Model, Joint of this Type does not interfere with the installation of Light Bracket at the lower part.
View detail
It is convenient when saying when you keep a couple of standings
This usage was used for protection of Mesh brake hose,
You can substitute Vinyl Tape for Spiral Tube, but I used this to think about the appearance,
If it was the ReplicaBoom in the 1980's, even in a round winding with Tape as a first aid, a certain meaning bracket
Although it was good, in recent years it does not go so, a polite finish is required,
Usability is a product of Rubber, so it is easy to process with Cutter, and even if it fails it is not too regrettable
I think that it is good, because it is a product that is unlikely to be surprising, I am gratefully using it,
Depending on the ingenuity, you can use a variety of things The last time I used it for anti-vibration Rubber, but it works well.
There is something useful if you have it.
View detail
I think that it is necessary parts for OEM-like Custom.
【Purchase motive】 In order to change Brake hose before and after FAZER to Osage Edge line, I tried OEMHose and Edge line before replacement work, so I found out what I needed to match the thickness of OEM Clamp and purchased it.
[About installation]
Cutter cut the center part and pinched Hose. Even if you do not need glue etc. on the part you cut, there is no particular problem as it is clamped by Clamp.
【About Hole Size】
Because the thickness of Hose is 7 mm, 7. I made it to 5 Millimeter Size. It made this Size so that Brake hose can move up and down together with the movement of suspension.
[Others]
FrontX 2, Rear X 1 this time I thought it was expensive.
I aimed for OEM-style HoseLine so I think that it was good to match well with OEMClamp.
View detail
For GOODRIDGE's Brake hose
I installed it for Brake hose of GOODRIDGE. I applied CRC from Brake hose's Connector, screwed it in and attached it. I used 5 sets for 1 Set for 1 Vehicle with 7 mm inner diameter and 14 mm outer diameter. It is Just fit.. View detail
I broke it and used it
Although it is good for the person who makes Line, since it is not divided, it can not be used for completed Hose.
I divide it by half and use it.
If there is a variation, there is no variation, the star Quantity : 5pcs. is.
View detail
To protect Mesh hose
【What made you decide the purchase?】 price
【How was it actually used?】 Favorable. It is also durable.
【Was it difficult to install? (Hard parts case)】 Banjo is hard to pass through as it is
【Please tell me the point of installation and hang (in the case of Hard parts)】 It is good to put a split.
[Is there anything I was disappointed about?] None.
【Hope for Manufacturer - Please let me know if there are any improvement points; I wish I had a bargain or a Clamp attached
【Have you compared items?】 None.
[Others]
Inner diameter 6 for Stainless MeshBrake line. We used 5 mm. As it is
Because it is hard to pass through Banjo, insert it like OEM Product. The gap of division is
A little out, but Hose outer diameter 6. 5 Rubber inner diameter 6. 5 So almost Exactly.
Just my Hose is One-off "Stainless mesh hose not covered"
So, it is Exactly, but the "Tube - protected one" that is well circulated is
I think that the gap of quota will be increased.
If you are interested in forcing Banjo through (Would you pass? W) , Motorcycle ya
It might be better to get Hose to Rose once.
View detail