Reviews
KEIHIN Slow Jet
I bought KEIHIN 's PC 20 and I searched for Pilot Jet for it, but when I looked for something with the same diameter but not the same diameter, Pilot Jet for APE 50 seemed to fit, so I bought it only Was.
After arriving, when I tried it, it matched perfectly.
Setting is also perfect
View detail
Fits: その他 FCR Carburetor Main Air Jet, その他 CVK Carburetor Main Jet, Others FCR Carburetor Body Carburetor MainAir Jet, Others CVKCarburetor Main jet
MJ is easy to align
It is recommended because it is easy price for single item.
I bought it by skipping the second, but it is in the Vinyl which was divided into Small
I felt it was easy to manage.
View detail
Fits: その他 FCR Carburetor Main Air Jet, その他 CVK Carburetor Main Jet, Others FCR Carburetor Body Carburetor MainAir Jet, Others CVKCarburetor Main jet
Reliable OEM Product
We used it for Setting when attaching PD22 of Takegawa to APE 100.
Air intake Duct and Manifold are exchanged for CRF 100, Air cleaner leaves OEM intact. Exhaust System uses Super type trap Up type.
AS will remain as purchased, and will go to Smooth from bottom to top at # 108.
As the setting was decided without permission, it is somewhat unsatisfactory.
Main jet is a precision part, so it is very safe to be KEIHINOEM.
View detail
Fits: その他 CR-SPECIAL carburetor for Φ26-Φ33(small body), Others CR-SPECIALCarburetor for Φ26-Φ33(Small body)
I am using it for CR carburetor. It is a Keihin product of good performance.Structure of details differs from the thing of the other company.It was regrettable that it takes time a little to have it if Webike does not have it in the stock. It
I am using it for CR carburetor. It is a Keihin product of good performance.
Structure of details differs from the thing of the other company.
It was regrettable that it takes time a little to have it if Webike does not have it in the stock.
It is better to finish the arrangement of the cab at a stretch.
I consider that it is better to buy most of the things at once.
Since the needle is expensive each piece, you would better make a good management of your money.
View detail
Fits: その他 FCR Carburetor Main Air Jet, その他 CVK Carburetor Main Jet, Others FCR Carburetor Body Carburetor MainAir Jet, Others CVKCarburetor Main jet
Used for my VTR1000F. Bought it when I did maintenance for my cab, even though I didn't really need it. The cheap price got to me though, so I got it with a slow jet. I don' know the effect of it alone, but after maintenance, it's great! It smooth
Used for my VTR1000F.
Bought it when I did maintenance for my cab, even though I didn't really need it. The cheap price got to me though, so I got it with a slow jet.
I don' know the effect of it alone, but after maintenance, it's great! It smoothly accelerates from start to maximum.
Because it's KEIHIN brand it's obviously going to be good quality(^^)
If you wish to modify a domestic VTR into an exported one, then try this out!
View detail
It is used for a Setting of CR CARBURETOR.Since the compatible article has come out of the Main jet from a DAYTONA, a KITACO, etc., such selection is also possible to aim at a Reduction in cost, but there is no substitute about the Throw jet of CR CARBURE
It is used for a Setting of CR CARBURETOR.Since the compatible article has come out of the Main jet from a DAYTONA, a KITACO, etc., such selection is also possible to aim at a Reduction in cost, but there is no substitute about the Throw jet of CR CARBURETOR.Since there is [ guarantee / as an original manufacturer's product / same ] neither manufacturing control nor tolerance anywhere, even if the Jets except
pure are somewhat high too, a KEIHIN authentic positive one is first.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
Attach this to Kawasaki z1, or CR29 is attached, or it changes occasionally and is playing.Since FCR is with a Pump by a Flat Valve compared with CR, the Response and the accelerating feeling are excellent.However, when a difficulty is mentioned, since to
Attach this to Kawasaki z1, or CR29 is attached, or it changes occasionally and is playing.Since FCR is with a Pump by a Flat Valve compared with CR, the Response and the accelerating feeling are excellent.However, when a difficulty is mentioned, since tolerance is wide, there are many things with a quite unclear Setting [ just ] and part mark and the structure of mark is also complicated, it is a troublesome portion that between users starts a nerve in the case of a Maintenance.moreover, the premise to which the structure which the Roller attached to the Valve also wears a Body out -- a question is felt by what one.Moreover, I think that the Design square even if it removed the Seal individually seldom suits z1.It is CR in Design z1.
Although it was a strange expression and not being separated liking, it just said that the engine performance was uncanny.If it is in the best state, since it is the highest carburetor since the bottom also tends to treat town riding unexpectedly to also fly, but it is [ be / it ] under Setting by the YOSHIMURA mjn Kit of CR29 now, it is under standby in a closet.
View detail
It attaches with the PE type CARBURETOR made from KEIHIN.The Setting purchases #130, #132, #135, #138, #140 by PE24 carburetor by necessity (it is easy to do accuracy well). 500 yen/piece or more are usually carried out.A genuine
It attaches with the PE type CARBURETOR made from KEIHIN.The Setting purchases
#130, #132, #135, #138, #140 by
PE24 carburetor by necessity (it is easy to do accuracy well).
500 yen/piece or more are usually carried out.A genuine article is proved [ stamp / of
KEIHIN ].
View detail
Although the Main jet has come also out of the product of the other company, the pure Brand is purchased and arranged so that a Manufacturer may not change by Setting in the case of exchange. Also in order to perform the stable Setting, a Manufacture
Although the Main jet has come also out of the product of the other company, the pure Brand is purchased and arranged so that a Manufacturer may not change by Setting in the case of exchange.
Also in order to perform the stable Setting, a Manufacturer recommends you to unify.
View detail
The second-half type of CR85R and a PWK carburetor are equipped. Although an authentic positive one is #45, since it is a Setting of a little deep eye, it exchanges it for #42. The luck of the Axel became good after exchange and the standup of the Corner
The second-half type of CR85R and a PWK carburetor are equipped. Although an authentic positive one is #45, since it is a Setting of a little deep eye, it exchanges it for #42. The luck of the Axel became good after exchange and the standup of the Corner became quick. Since it is important to see a Carburetor setting on the whole, if Throws are exchanged, we will also recommend you exchange of a Main or a Needle. View detail
HONDA It purchases in the carburetor Set of a Racer. Unless it arranges, the original engine performance does not come out. Since it is pure again, the engine performance which could also expect accuracy and was stabilized is maintainable.
HONDA It purchases in the carburetor Set of a Racer.
Unless it arranges, the original engine performance does not come out.
Since it is pure again, the engine performance which could also expect accuracy and was stabilized is maintainable.
View detail
Fits: その他 FCR carburetor for Φ35-Φ41 (large body), Others FCR Carburetor Body Carburetor for ø35-Φ41(Large body)
It is a standard Needle of FCRphi39. Please purchase OCEMS in medieval times, and refer to the direction referred to as that a standard Needle is not known.
It is a standard Needle of FCRphi39.
Please purchase
OCEMS
in medieval times, and refer to the direction referred to as that a standard Needle is not known.
View detail
whose feeling of a Torque increased, so that it could feel to be sure after wearing which also obtained the low speed, regarded a few as wanting a Torque, and purchased the goods here -- very satisfactory
whose feeling of a Torque increased, so that it could feel to be sure after
wearing which also obtained the low speed, regarded a few as wanting a Torque, and purchased the goods here -- very satisfactory
View detail
[a Webike Monitor] -- it was found useful for CVK to carry out Setting appearance.
[a Webike Monitor] -- it was found useful for
CVK to carry out Setting appearance.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
The engine performance is no match for a pure carburetor. Although the FCR of engine performance will probably be better, of course, it can be satisfied also with this one enough. It is a carburetor which the suction noise is also sm
The engine performance is no match for a pure carburetor.
Although the FCR of engine performance will probably be better, of course, it can be satisfied also with this one enough.
It is a carburetor which the
suction noise is also smart and the Response may also go up.
View detail
He bought the Setting of PWK28. Although it is KEIHIN, a rough & Road seems to be the agency ?.
He bought the Setting of PWK28.
Although it is
KEIHIN, a rough & Road seems to be the agency ?.
View detail
It purchased to the Setting of the Oversize. It is not , however a Size which can be used for this present intense heat, and is likely to become the Challenge after becoming a little cooler.
It purchased to the Setting of the Oversize.
It is not
, however a Size which can be used for this present intense heat, and is likely to become the Challenge after becoming a little cooler.
View detail
Although he wanted to purchase JB Power's goods, it purchased here by the waiting for two months. Compared with purchase and various Settings of attachment and the various Hoses of the negative pressure extraction Nipple to a Spigot, and JB Power, it is
Although he wanted to purchase JB Power's goods, it purchased here by the waiting for two months.
Compared with purchase and various Settings of attachment and the various Hoses of the negative pressure extraction Nipple to a Spigot, and JB Power, it is fairly serious in
attachment.
Start up is simplified as the Setting is carried out so so at the time of
shipment.
However, although it may be because Mufflers are exchanged, as for instability and low and medium speed, a bad condition and the acceleration of high rotation of an Idling are the highest.
Although it is under Setting now [
] and the original engine performance has not come out, it is touch called FCR truly.
The difference with
JB Power is touch called required Tamotsu who applies time and effort.
View detail
Fits: その他 FCR Carburetor Main Air Jet, その他 CVK Carburetor Main Jet, Others FCR Carburetor Body Carburetor MainAir Jet, Others CVKCarburetor Main jet
Since it changed into the external Muffler and the After Fire became severe, it purchases. Cold time is touch that it is good now. Igniter :. front [ regulation ] Silencer: -- nojima Slip-on pig nose: -- before regulation --
Since it changed into the external Muffler and the After Fire became severe, it purchases.
Cold time is touch that it is good now.
Igniter :.
front [ regulation ]
Silencer: -- nojima Slip-on
pig nose: -- before regulation -- SJ:38
MJ:132
Needle: -- it being too deep and carrying out the engine failure of the 3rd (for KLX300R) step earnestly, if
, however warm time are not made thin -- 。
Since the
price is cheap, it has many things and there is no loss.
Since it did not sell near the
, there is Webike and it had been rescued.
View detail
It is a time-tested product of the measure against an After Fire. It is the touch which may be improved.
It is a time-tested product of the measure against an After Fire.
It is the touch which may be improved.
View detail