Reviews
It gets pretty hot.
As expected of a genuine product. The grip is comfortable. The temperature rises to the point of being hot when set to high. I survived one winter with winter gloves and this grip heater. In the middle of winter, there may be nothing better than electric heated gloves (I have never used them, so I can't say for sure...), but the best thing is that it is easy to use without the hassle of connecting an electric cord to the glove when using it, and it extends the use season of Pairslove leather gloves, which I use most during the touring season. The biggest advantage is that I can extend the use season of Pairslove leather gloves, which have been my most favorite during the touring season. After all, it is nice to be able to use familiar gloves that winter gloves and electric gloves do not have. There are cheaper external products available, but if you want to use them for a long time, genuine products have a different sense of security. We highly recommend them. View detail
For spare or for rent! Cost-effective!
The price is so high that it comes with Anti-Fog processed Lens!
I bought it because I thought it would be a good price for a spare at Race and for loaning out when I occasionally run with Off beginners.
When we looked at the actual product, we could confirm that it has the same quality and materials in key areas as the more expensive Goggles.
However, the Fit feeling requires some getting used to, and I felt that the distortion was a little strong on my face, which is not very uneven, as if I were a representative of a family with a flat face.
Maybe it will be just fine if I get laid more.
View detail
![Aluminum Billet Handlebar End [GrooveType]](https://img.webike-cdn.net/catalogue/images/127179/BEGV_TS.jpg)
Fits: SUZUKI DL1000 V-STROM250SX
Car-specific installation kit?
As a result of the installation, there is a 7mm gap (see photo) at the Knuckle guard mounting point, and it rattles when driving.
This is happening because the thickness of the Color Guide for the car-specific installation kit is 12mm and Large!
In the end, to eliminate the 7mm gap, we purchased a K-CON M6 18Φ 5mm thick aluminum spacer and installed it to eliminate the gap.
In addition, the DL1000 V-STROMSX bar end attachment part is described in the instruction manual as a type that compresses the rubber between the bolt and the handlebar and crimps it to the handlebar, even though it is a type with a screw cut on the end of the handlebar (the parts list does not show such a construction). (Even the Parts List does not show such a structure.)
Thinking that perhaps a mounting kit for another model was mistakenly included, I inquired at the ManufacturerSite, but received no response (I was disappointed because I had been using the Manufacturer's Lever until now).
The quality and texture of the product are highly evaluated, but the mounting kit is not good enough.
Dear Webike.
Not because it was a SPECIAL PRICE.
View detail
No more muddy Boots straight into the car.
I was attracted to this product after reading an article on an Off-road specialized Site and was attracted by its cosmetic appearance.
Boots covered in mud from forest road touring or Enduro races would be a problem for anyone, but we could not find an answer to the question of how to carry them, including their shape and large size.
However, when I saw this product, I realized that if it gets muddy, I can just shove it in this and wash the whole Bag afterwards.
The interior is made of a smooth material that does not get dirty, and the sides of the bag are made of a mesh material, so the bag is well thought out to prevent dirt and steam.
What's more, the price is easy to buy, and it's nice to know that you can replace it in 1-2 years if it's heavily used and he Sauce.
Even though there is no elaborate design, I found it to be very good in terms of solid functionality and cost-effectiveness. As expected of a DFG product!
View detail
for Race, it seems.
I didn't like how thin the swing arm of the NS-1 was back then, so now that I'm a large person, I decided to secretly buy one without telling my wife and secretly install it.
The design looks good, the Installation Instruction Manual is missing and I know that I have to buy it.
"For Race" and the enclosed handwritten paper stated (^_^;)
I thought it was very important information that I wanted to know before I bought the car. I am a little worried.
View detail
Taste after 5 years of use.
It can be looped so it can be adapted to any Style.
The first is a bright Orange color.
The more it is used, the more natural the brown color becomes.
Button with Crimp on thick cowhide.
The key and Key Holder will not come off.
Motorcycle riders are looking for a product like this that is sturdy and won't scratch around the Stem.
I found a pretty good product.
View detail
Fits: YAMAHA YZ125, YAMAHA WR125, YAMAHA TY250 Z SCOTISH, YAMAHA DT200 WR
Quickly to run
With the Front12T, you will be running Quickly, both on forest roads and in town.
It is affordable and I feel the effect of the replacement.
View detail
unexpectedly large
I like the design, it fits a lot, it's easy to wear, and there's nothing to complain about.
The photo shows it on a CT125 Rear Carrier. It is huge.
View detail
I miss the colors and design.
Good old-fashioned color and design. View detail
![Seat Cover [SK-110V]](https://img.webike-cdn.net/catalogue/images/13570/32632935_TS.jpg)
Fits: KAWASAKI Estrella RS, KAWASAKI Estrella RS Custom
Stretched well.
I bought Tucker to reupholster my old motorbike, and I didn't have the budget to spend tens of thousands of dollars on OEM or custom-made stuff, so I decided to do it myself at a low price. The thickness and texture of the seat is not as good as OEM, but I regretted that it looked cheap when I received it, but after I stretched it, it looks beautiful. The ride quality is also better. Even if I applied anti-slip coating, after applying the brake, it was gapping in front of the car but now it is stable and easy to drive without sliding. The material that looked cheap is now shiny and beautiful. I've never done any DIY before, so I'm a beginner and I'm too lazy to watch YouTube, but I can get by even if I do it haphazardly. Now I'm planning to reupholster it again and put Nylon in it for rain protection and Gel Zab under the Seat for long distance protection. View detail
![TECH5 Boots [TEC5 Boots]](https://img.webike-cdn.net/catalogue/images/111848/2015015_72_1_TS.jpg)
Evolution!
I had been wearing Tech3s for about 10 years and decided to buy new Boots due to a ripped Buckle.
I bought a Tech5 in a color like Doraemon. I like it very much because it is a rare color.
I tried them on right away and they are just the right amount of softness and the size is just right. (26.5cm) The same size was perfect.
The buckle fastening method has evolved. The previous boots had to be removed forcefully, but the structure has been changed to make it easier to remove the buckle.
I was too tired to take them off after a ride, but with these Boots I was able to take them off right away.
I plan to stay with these Boots for a long time until they break too.
View detail
Installed on a KTM890Duke-R
The product is presented as being for a KTM 790 Duke, but I was able to install it on an 890 Duke R with no problems. There are about 15 bolts that need to be removed, and two bolts need to be replaced with the supplied ones in order to sandwich the supplied spacers (long and short) for product installation. In the process of removing the ground cable holder mounting bolt, adding the short spacer, and replacing the bolt, the original locktite was in the way, making it difficult to twist the bolt in, so we used a tap to prepare the female threads. Also, the short spacer had to be installed between the vehicle side parts, so dexterity was required. View detail
Fits: KAWASAKI ER-5, KAWASAKI GPX600R, KAWASAKI KLE500, KAWASAKI KLF220, KAWASAKI Eliminator 600, MAGNI 1000 Australia2, MOTOGUZZI 1000 Ditna RS, bimota YB-4, bimota YB-6, bimota Dietsch 1000, bimota Flannel 1000, HONDA CB1100F, HONDA CB1100R, KAWASAKI 1000GTR, KAWASAKI 250TR, KAWASAKI EN400, KAWASAKI EN500, KAWASAKI EX-4, KAWASAKI FX400R, KAWASAKI GPZ1000RX
Idling stabilized?
I changed the oil as part of maintenance, and it seems to have stabilized the idling, but I don't feel that the power is increased. I really don't know if the period to change the oil was too short and the oil was not so deteriorated, but it is an old motorcycle and I will replace the oil as soon as possible. Next time I will buy a Torque wrench and tighten it with the specified Torque. View detail
Fits: HONDA CB1100, HONDA CB1100 RS, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP
General Slider
The car was delivered with DAYTONA's Engine Guard installed.
Because I scraped it just by driving normally on a mountain road,
Changed to Slider.
I am concerned about Damage to the Motorcycle in the event of a fall.
View detail
Fits: YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA YZF-R25
It looks better now.
Model YZF-R25
The Rear is quite dirty and it is now clean. the Brake Caliper is OEM and the Pad is DAYTONA, but I am glad I replaced it. The braking power is normally increased and I am satisfied.
View detail
Easy to install!
Installation was easy.
Japanese Vehicle Inspection Correspondence, but I think the sound is too loud.
But it's cool, so I'm satisfied.
View detail
Large satisfied
Installed in CHALY.
It needed a little modification for the CUB, but it is quite good for a little flippant shopping.
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI Ninja1000SX, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI Ninja ZX-25R
It's easy.
Seal for easy installation!
The light blue reflection alone has a custom feel!
I loved it.
View detail
It is outstandingly light!
Was the one you received as per Image?
It is cooler than it looks in Catalogue.
[How did you feel about the Fit?
It seems to be a Japan-only spec, but the inner pad is harder than the Japan product.
It is hard and rough and has a low Fit feeling.
How was your experience with it?
The lightness is outstanding, I always had neck pain with SS, but my head was light and easy.
The aerodynamic characteristics are also better than OGKShoeema.
Wind Cutting sound and quiet characteristics are normal.
What are the specifications of the product?
Ventilation is normal within legal speed limits.
Included Parts:is a good value for the money.
It even has a Dark smokeSeal, Pin lock and ShieldFilm.
[Was there anything that disappointed you?
When the Shield lock is opened by Button type, there is no flange on the Shield.
It is difficult to open.
The cap is not compatible with wireless microphone.
Fit feeling is quite low. 。
How did it compare to other products?
Material at this price:Carbon products are not found in domestic products.
It is lightweight and has good aerodynamic characteristics.
The interior quality and fit feel is low.
Other items that would be helpful
Deciding Factors for Purchase/Included Parts:Presence or non-existence of Included Parts/Points to Note/Opinions and Requests to the Manufacturer
Rear spoiler is available as an Option.
View detail
Fits: DUCATI SCRAMBLER DS FASTHOUSE, DUCATI SUPERSPORT 620, DUCATI MULTISTRADA 1200 PIKES PEAK, DUCATI MULTISTRADA 1200 S, DUCATI ST3, DUCATI SPORT 1000 S, DUCATI MONSTER 795, DUCATI DIAVEL 1200, DUCATI SCRAMBLER NIGHTSHIFT, DUCATI SCRAMBLER MACH 2.0, DUCATI SCRAMBLER CAFE RACER, DUCATI SCRAMBLER DESERT SLED, DUCATI SCRAMBLER ITALIA INDEPENDENT, DUCATI SCRAMBLER FLAT TRACK PRO, DUCATI SCRAMBLER URBAN ENDURO, DUCATI SCRAMBLER STREET CLASSIC, DUCATI SCRAMBLER CLASSIC, DUCATI SCRAMBLER FULL THROTTLE, DUCATI SCRAMBLER ICON, DUCATI SUPERSPORT 750
The maintenance improvement after installation and the visual design is great, but …...
It's no surprise that Doka's dry Clutch is a natural choice for OpeningCover.
Wet Clutch cover. [Color] When set to Clear, the Impact of the visual design is the best!
However, when the difference in temperature is extreme, condensation and emulsification on the Glass surface is very severe. When the difference in temperature is extreme, condensation and emulsification on the glass surface is very severe.
It's dirty and you can't see what's inside, so it's kind of a bad parenthesis (laughs).
However, switching to this Cover will super reduce the hassle when changing clutches!
Since only the clear part is removed from the O-ring, there is no need to peel & attach the liquid gasket.
OIL is also hardly reduced, so that's great to think about!
I think the price is about the same considering the design and quality of workmanship.
What others think of this price for this part is...
View detail