Reviews
Rugged construction is cool.
I think it can be used for a wide range of purposes, from daily use to camping touring. I have been using givi's Top case, but this case is no less satisfying.
The rack on the top of the Case is also welded securely in place, although the Pipe is thin. We were instructed to remove the stopper from the opening, which we did, but we also installed a givi stopper so that the case can be secured in the open position. It is now very easy to use.
Reflector is also included, but it is not attached because Parenthesis is not good.
I will use this Case until it breaks.
View detail
Mounted on NAKED's TrussFrame
When we were looking for a bag that would not disrupt the silhouette, we found a picture of a product used as an Engine GuardBag and came up with the idea of attaching it directly to the TrussFrame.
Short stroke and relatively easy to raise the temperature of the Engine, but since it is installed without contact, there does not seem to be a heat problem.
It looks like a HUSQVARNAOEMOption, partly because the Accent color on the Motorcycle side is the same.
About the product
It is a little annoying to attach and detach the three ReleaseBuckles to open and close the RollTop, but that is probably part of the Completely Waterproof and TradeOff.
I have driven about 300 km, and even at high speeds and in strong winds, the excess Belt does not come off and go out of control.
The lining is white, making it easy to see the contents, and all the clasps are gold except for the release buckle. The surface has a matte texture similar to suede, and there are no frayed threads, etc.
In general, it is a very good product.
View detail
Stitch is well made! Very sturdy!
I have several Motorcycles and it is a hassle to attach and remove them, so I purchased this product. As you can see from the picture, the stitching is very strong! The buckle part is also very strong and doesn't shake even if you pull on it! The buckle is as durable as the buckle of a mountaineering backpack! The strength is so much stronger than the buckle of a mountaineering backpack! View detail
Fits: SUZUKI ADDRESS V50, YAMAHA Remote controller jog, YAMAHA TOWN MATE80, YAMAHA MATE NEWS 50, YAMAHA JOG TRUNKSpec., YAMAHA SUPER JOGZ, YAMAHA MATE, YAMAHA JOG SPORTS90, YAMAHA JOGSporty, YAMAHA JOG Z, YAMAHA YV50 Z II, YAMAHA JOG Zr, YAMAHA AxisTrunkSpec., YAMAHA JOG, YAMAHA Vino, YAMAHA YB50, YAMAHA Axis, YAMAHA PW50, YAMAHA V80MATE50, YAMAHA V80MATE80
Very good for occasional motorcycle rides!
Purchased for an old CUB that I might ride once a month or so.
S Size was the perfect size.
The fabric is thick and flap resistant, and the waterproof property is very solid.
The inside is also soft material and gently wraps the body of the car. Considering the quality, the price is very reasonable.
Because of its weight, it cannot be applied quickly and easily, so it may be a hassle to put it on and take it off every day when you commute on your motorcycle.
This product was very Exactly for my needs for a vehicle that is only ridden occasionally. I am planning to buy one for my other motorcycle that I ride only once in a while.
View detail
Good multi bar!!
It's a really good product. Both the finish and the design are excellent. I bought the multiba twice. Thank you for your prompt delivery. I recommend this product to others, too View detail
No worry about falling off.
There is no sign at all that the 120km/h section of the New Tokyo-Nagoya, the Decoration bumpy road, or anywhere else you might fall off.
Vibration absorption capacity is also very high.
I have tried a few and they are by far the most secure in preventing drops, and if you are really worried, you can easily lock it with Lever.
It is very easy to use as it is easy to connect Charger.
The only complaint I have is that it is difficult to clean because dust tends to accumulate in the groove where it is fitted.
Also, some people have a problem with the way it looks. (Depending on Motorcycle) It may seem a bit lumpy.
View detail
Can be used with ZETAHand guard
It is the same φ22.2mm as the Handlebar, and I purchased it to install a Smartphone Holder and a radio-controlled watch. I was a little worried that it might interfere with the ZETA hand guard I bought with the CT110 HUNTER CUB, but it was the same manufacturer and I was able to install it easily without any interference at all. Installation was done with just one HexWrench. After the installation, there is no rattling at all, so it seems to be useful for reinforcing the rigidity of the handlebar a little.
I am happy with the Handlebar because it is less cluttered around the Handlebar and is more Refreshing than I expected. I don't need anything else near WITH Handle other than these three. (USB power supply is already secured at another location) So, this is sufficient in terms of capacity. If I replace it with a Multimeter with a clock, I'll be more Refreshing, since I won't need a radio clock.
View detail
No water leakage even in heavy rain.
The large size may be too large for a short ride around town, but the large size will work well for touring.
The box itself is not too large, as you can see in the photo of it installed on a GSR250.
It may be a little too wide for daily city driving, but since the Mono-lockSeries can share a pedestal, I plan to purchase an additional 30+L one separately and use it together.
During the touring, we encountered such heavy rain that we could not see in front of us, but there was no water coming in at all, which we were worried about.
Material:I was somewhat prepared for this because it was Plastic's box, but it was indeed GIVI.
Once purchased, the product will last for a long time, so if you are only excited about the initial outlay, you will be satisfied.
This is only a review for Touring use.
View detail
Used for GSX-R125
I was using a Suction Cup tank bag for my GSX-R125 because I could not use a magnet tank bag, but I was looking for a Belt type tank bag because it was difficult to fix the tank bag in place.
However, the GSX-R125 does not have a bare Frame, so there are limited places to install a Belt for fixing.
I put it on a footpeg Plate.
The firmly fixable and non-slip backside of the base prevents it from shifting while running.
The back itself is not very large, and it fills up after you put one Rainwear in it.
I don't know if it's worth the price, but I'm not going on a long touring trip with lots of luggage. I don't think so, but it's not like I'm going on a long touring trip with a lot of luggage, and there are only a few bag options available.
View detail
Fits: Others , HONDA REBEL 250, SUZUKI V STROM250SX
Overnight Touring
It is sufficient for an overnight touring including a rain jacket and a change of clothes.
It is stable against thin Tandem seat.
View detail
Fits: HONDA Ape 50, HONDA Ape 100, HONDA Ape 50, HONDA Ape 100
The APE can be found at ・・・・
I purchased this carburetor and installed it in order to prevent dust from being sucked into the carburetor while driving on the street, but the intake resistance was much greater than I had imagined. In addition, the carburetor protrudes to the Right on the APE, so the Rubber that stops the Net when the carburetor hits the thigh while driving is not able to be used.
Gap and before I knew it, Net and Sponge were gone. Now I am using Funnel with JAM's 3D Air Filter (Right Side Cover needs to be removed or partially cut).
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA CROSSCUB110
It's solid
We are getting bummed for the CUBCampingDebut.
I have considered and compared various side bag supports from various companies, but I chose Nana Company's side bag support.
I have decided!
It is a solid and firm installation kan tan.Quantity:Pair (for Left and Right) Therefore, it is a good value.
View detail
![[BABYFACE x Tone] Switching Ratchet Glasses Key Chain](https://img.webike-cdn.net/catalogue/images/60084/TON-G-033_TS.jpg)
It can be used occasionally.
Very small and cute keychain item. Great to carry on your bag or key. The quality of the Tone tool is also good. It is a good size for emergency use. View detail
Fits: Others
Mounted on CUB 110cc Crank bar
We replaced the Rubber part of Crank Bar's Smartphone Holder with this one.
When I run, the phone is still vibrating in Small increments due to vibration. I'm not sure how much the vibration is reduced, but I think it's good for preventing breakdowns.
View detail
It is quite good.
Although it takes 60 seconds to establish the connection due to the Radio Law, this product uses a soft power supply that shuts down 5 seconds after the ACC power is disconnected, so even if your car model shuts down the ACC power at the time of cell start, as seen in BMW etc., the power will not be turned off when the engine starts. Therefore, if you put on the Helmet and Gloves after turning on the key first, you will be connected to your smartphone by the time you step over and turn on the Cell, and you will not feel the stress of waiting for the connection.
If your vehicle is equipped with a 12~16mm GPS Mount Bracket, the Tanax AIO-5 Mounting Bracket can be used without modification.
The cost performance is great, but the screen size of 4.5-inches is a little insufficient.
View detail
Changed to wire lock.
The one I was using before broke from the middle due to deterioration and I couldn't use it anymore. I was looking for something less likely to break and switched to this one made of Wire.
I think it is supple and easy to use without being oddly heavy. How about durability? I guess so.
I don't know how it will turn out, so I give it 3 stars for durability.
View detail
![Two Tone Taffeta Bike Cover [3L]](https://img.webike-cdn.net/catalogue/images/102051/IMO9150_02_TS.jpg)
Fits: YAMAHA FJ1200, HONDA RVF, SUZUKI MARAUDER125, SUZUKI Banted 1250, SUZUKI Banted 1200S, SUZUKI DESPELADO800, SUZUKI DESPELADO400, SUZUKI SV650S, SUZUKI SV400S, SUZUKI SV1000 S, SUZUKI SV1000, SUZUKI RF900RV, SUZUKI RF900R, HONDA CB550, HONDA CB750, HONDA X-11, KAWASAKI GPz1000RX, HONDA STEEDVIS, HONDA STEEDVIX, HONDA V-TWIN MAGNA
be too much
XJR1300 is written as 3L Size, but the Size is too Small to talk about. View detail
![[BABYFACE x Tone] Ratchet Glasses Wrench Key Chain](https://img.webike-cdn.net/catalogue/images/60084/TON-G-004_TS.jpg)
a gift purchase
Very small and cute keychain item. Great to carry on your bag or key. The quality of the Tone tool is also good. It is a good size for emergency use. View detail
Holder's clattering sound is gone.
[How is it used?
I bought this product additionally because I was told that iPhone breaks Camera by vibration.
Was the one you received as per Image?
It was larger than I expected.
How was your experience with it?
I am not sure if the vibration of the phone itself is reduced and the Camera is protected, but the Smartphone Holder itself used to make a rattling sound, but that sound has disappeared, so I think the vibration is absorbed.
[Points to note]
The mounting position needs to be adjusted as it increases the bulk considerably.
How did it compare to other products?
I wanted to use DAYTONA's Smartphone Holder, so I didn't compare it to other products.
View detail
Paint job is messy?
Matte paint nomenclature is present, but the overall texture of the paint is nowhere near as good.
The peeling paint on the Bolt is particularly disappointing.
Nevertheless, it is nice to be able to add Accent by using the Cap bolt collar, which is sold separately.
View detail