【Osaka Fiber】Two Tone Taffeta Bike Cover [3L] Review
Fits: YAMAHA FJ1200, HONDA RVF, SUZUKI MARAUDER125, SUZUKI Banted 1250, SUZUKI Banted 1200S, SUZUKI DESPELADO800, SUZUKI DESPELADO400, SUZUKI SV650S, SUZUKI SV400S, SUZUKI SV1000 S, SUZUKI SV1000, SUZUKI RF900RV, SUZUKI RF900R, HONDA CB550, HONDA CB750, HONDA X-11, KAWASAKI GPz1000RX, HONDA STEEDVIS, HONDA STEEDVIX, HONDA V-TWIN MAGNA,
be too much
XJR1300 is written as 3L Size, but the Size is too Small to talk about.
Responses
Other reviews
Every year they ruin it and buy...
It will be ruined in about one year. It will tear. But...
If it's only $1,700 a year, why not just buy it every year?
Will something that costs 10,000 yen really last 5-6 years?
Cost performance is good when you think about it.
View detail
Price suitable
This is sufficient for indoor use. For outdoor use, it may not be enough. The size of the CUB is 5L. 4L may be sturdy enough for large scooters, but 5L is better for big scooters. The price is cheap and it is recommended for indoor use. View detail
It is thin in every way!
The material was not like this manufacturer's, made of Chinese PelePera, and it was not durable enough for summer use, perhaps due to weak UV rays, and was in a chattering state. I reinforced it with tape several times a week and it was in a wartime-like state! I was hoping it would last a year. View detail
Cheap and easy-to-use Motorcycle Cover that easily protects your car from weather and theft.
[How is it used?
The purpose is to prevent age-related deterioration and staining due to weather, since the bicycles are parked outdoors in the open air.
Also, the purpose of preventing tampering and theft.
Was the one you received as per Image?
Based on the image and dimensions Size, it is almost exactly as shown in the Image.
How was your experience with it?
? Water repellent finish
? Silver coating that reflects direct sunlight
The Mirror part and the Blue fabric are made of
The turnaround is Accent on the Design.
The keyhole is designed for large locks, and PPTape is used.
Separate colors are used for easy distinction between front and rear.
(Front wheel:Red Rear wheel:Black)
- Buckle at the bottom of the vehicle body Prevent wind fly Belt
Equipped with
? Robust sewing with double needle Sewing machine
? Use 75 denier Polyester taffeta
[Points to note]
I've also noted this clearly in Manufacturer as a precaution,
How to use and care for it.
Do not apply Cover to vehicles that have been wetted by rain or car washes.
Water left on the car body and the lining of the Motorcycle Cover adhere to each other, causing friction and possibly scratching the car body with small gravel, fine dust, etc. We recommend that you remove water, dust, gravel, etc. from the car body thoroughly before using the cover.
Motorcycles that have been used in the rain before the Motorcycle Cover is applied should be wiped clean and maintained at a later date.
Avoid using BacCover during typhoons, storms, and other strong winds.
High winds can cause flipping and flapping of the Cover, which can lead to abrasions and tipping of the Motorcycle.
If you choose to install the Cover to protect your Motorcycle from non-products caused by high winds, please use it with caution and at your own risk.
Wind, including strong winds, can cause the Covers to flap, which may result in peeling of the paint film and scratches on the car body.
*We recommend that you prevent your motorcycle from tipping over in strong winds when the Motorcycle Cover is hanging.
Motorcycle Covers that have been soaked in rain will not dry quickly, so please remove the cover from the vehicle and allow it to dry completely before using.
If the ground is still damp after the rain has stopped, condensation inside the Cover may damage the painted surface and stain may occur on the Gold surface.
Also, the temperature difference between the inside and outside of the cover may cause moisture to form inside the cover, so please remove the cover periodically to evoke the moisture.
Water-repellent sprayetc. can be applied after drying to extend the life of the Cover.
*Regular maintenance of the motorcycle cover by spraying water-repellent spray is recommended.
How did it compare to other products?
The fabric is thin, so we recommend replacing it each time it is used, as it may tear due to age-related deterioration depending on the environment in which it is used.
It is low-cost, but with consideration for identification of front and rear, and keyholes in front and rear, making it convenient to install a locking device.
It is also good that the CenterBuckle belt is equipped with wind-skipping protection.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
The way to distinguish the front and back is to hang the Motorcycle Cover in front of the Blue colored One point.
The color of the keyhole on the Front is Red, so it can be distinguished here as well.
The color of the Rear keyhole is Black, so it can be distinguished here as well.
It is safe to prepare a front and rear locking device. If installed at the same time, it will reduce the RISK of flying Motorcycle Cover in the wind.
Also, by installing locking devices in the front and rear from theft prevention, the risk of being targeted is reduced by the fact that the Motorcycle cannot be seen, which takes time to steal.
Water-repellent sprays can be prepared for regular maintenance.
View detail
It's still good
I have purchased this Manufacturer's Covers many times and the cost performance is the best.
This time I ordered 3L because I wanted to install a Large Screen on my New Model PCX125, and Large was the right choice.
Rear box is not attached but it seems to hide the LimitWheel.
I will buy the 4L next time.
View detail