Reviews
Dress-up with a good outdoor feeling
【Motivation or reason for choosing or purchasing
I was looking for a headlight guard mainly for dress-up purposes and found this product which is just right without being too off-road smelling.
I rarely drive on surfaces with bouncing stones and didn't really expect it to function as a Guard.
In addition, because Pipe comes in front of Light though it is thin, the irradiation ability becomes uneasy if there are too many.
When installing
One of the good points common to all KITACO products is that the installation manual is designed to be easy for the operator to understand, so I had no trouble.
Even if I worked slowly and carefully, it took about 15 minutes to install.
Also, as mentioned in the manual, there is a part where the bracket sticks out, so it would be better to cover it with a curing tape to avoid scratching the painted surface of the Both Sides.
[Fit & Feel]
It has become the appearance that meets the purpose of the moderate Outdoor feeling Up.
If I were to compare it to a four-wheeled vehicle, it would be like a two-wheel-drive SUV instead of a four-wheel-drive Black Can.
The front carrier also increases the area of the BlackParts, so it looks more tidy.
View detail
Fits: BETA RR4 T, BETA RR4 T 125, BETA RR4 T 125 LC, BETA rr4 t 125 lc motard, BETA RR50 Factory, BETA RR2 T 300, BETA RR2 T 250
Quality is the best
It is made of thick Carbon and the quality is the best.
But the truth is that I bought it because I had no other choice.
It's just an exterior Parts, so you want to save your Gold if you can.
It would be more helpful if you could sell the same product in resin at a lower price.
View detail
Design is good
The design is cool. It is a great item with protection in Serow250 as well. It's like I'm changing from a gentleman to a bodyguard. View detail
Koch installed it with no problems, and the GCraft stigma is cleared?
GCraft two items & omega;
The AdjustableWideSide Stand gave me a hard time, so I got defensive, but the Kochs were installed with surprising ease and ease, and the omega;
Remove the mounting bolts (HEX5mm×4) next to the headlight and put the collar in and fix the bolts (HEX4mm×4).
Well, it's not a bad Style.
I don't want to rear-end and I don't think I'll ever go off hard, so I think the Main is a handle for something.
View detail
Fits: HARLEY-DAVIDSON STREET750, HARLEY-DAVIDSON FXD DYNA SUPER GLIDE, HARLEY-DAVIDSON FXDB DYNA STREET BOB, HARLEY-DAVIDSON FXDC DYNA SUPER GLIDE CUSTOM, HARLEY-DAVIDSON SPORTSTER XL 1200L LOW, HARLEY-DAVIDSON XL 1200T SUPERLOW 1200T, HARLEY-DAVIDSON XL 1200X FOURTY-EIGHT, HARLEY-DAVIDSON XL 883R 883 ROADSTER, HARLEY-DAVIDSON XL 883L SUPER LOW, HARLEY-DAVIDSON XL SPORTSTER 1200L LOW, HARLEY-DAVIDSON XL SPORTSTER 1200R ROADSTER, HARLEY-DAVIDSON XL SPORTSTER 883, HARLEY-DAVIDSON XL SPORTSTER 883L LOW, HARLEY-DAVIDSON XL1200CX ROADSTER, HARLEY-DAVIDSON XL SPORTSTER 883R, HARLEY-DAVIDSON XL1200T SUPERLOW 1200T, HARLEY-DAVIDSON FXDL DYNA LOW RIDER, HARLEY-DAVIDSON FXSB SOFTAIL BREAKOUT, HARLEY-DAVIDSON FXDWG DYNA WIDE GLIDE, HARLEY-DAVIDSON XL1200XS FORTY-EIGHT SPECIAL
nice product
fits well, easy to install, very nice. probably the only headlight grill that fits xg750 on market. It does its job! Recommended View detail
Caution! It is made of Polycarbonate.
The illuminated part of the light is made of Polycarbonate. It is recommended not to use any kind of screw lock agent. I got cracks here and there soon after using it.
As for the installation, it took me a while to install because the Bolt in the Light comes off easily. However, the quality is high and overall I am satisfied with this product.
View detail
Enough for a CUB
I prefer the reticulated Guard, but if you consider the protective polyethylene plate as a consumable This is better for protection from Small stones and sand The original OEM Headlight alone is darker and the light transmission of the poly plate makes it a little darker, but Even the reticulated Guard interferes with the floodlighting, so I think this is a tolerable level View detail
Parenthesis good
I decided to go with this one in a relatively sporty way for these types of Parts!
The surface is lightly pearled and the texture looks high
The installation took about 10 minutes, but when the bolts in the headlights came off during installation, they fell off I worked a little carefully because it seems to need to open the Headlight, but I used Large It was strong
It's hard to see from the photo, but it's clear and transparent (Polycarbonate) It comes with a Protector
View detail
For Dress-up rather than practicality
It has almost no practicality in terms of protecting the Headlight, which goes without saying
It should be separated from Dress-upItems
The build and installation is solid, so it doesn't seem to come off while driving
The protrusion of the mount part rubs against the body of the car when you install it, and it is easy to get scratches on the body of the car We recommend that you cure it before working on it
View detail
Fits: KAWASAKI Varios II, KAWASAKI Zephyr 750, KAWASAKI Zephyr 550, KAWASAKI Zephyr 400Χ, KAWASAKI Zephyr 400, KAWASAKI ZRX-II 400 Varios, KAWASAKI ZR-7, KAWASAKI Varios II, KAWASAKI Zephyr 750, KAWASAKI Zephyr 550, KAWASAKI Zephyr 400Χ, KAWASAKI Zephyr 400, KAWASAKI ZRX-II 400 Varios, KAWASAKI ZR-7
Garbage equivalent
It is severely distorted and impossible to install
I doubt the nerve of the Manufacturer to ship such a product
I'm so disgusted that I don't even want to put in Objection
View detail
100 points
I got it at the store's service. Installation is very easy, texture is perfect. The Image around the Light after installation became Wilde! There was no problem even at night driving. View detail
OK
Installation is very easy. I do not know the strength well, but it looks better. I have not met SEROW with this yet. View detail
Fits: HONDA Zuma X, HONDA Zuma X
Bankruptcy lost
It was firm packaging, but one of the Headlight guards was broken and the Double-sided Tape was also out. We installed Blinker at the same time, but it got lost during 30 km running.
Made in China is no use. I am ashamed of myself mistaking him as a Japanese company when asked Tanaka.
View detail
Eye part Kiriri
SPTakegawa
With the installation of Headlight guard I got kerrits at my eyes. Attention degree Up mistake none! It was easy to install because the installation Instruction Manual was written in detail.
View detail
The TANAKA TRADING Headlight Cover & Blinker Cover Set fits perfectly the zoomer. This product is very easy to install and no changes needed to be done to install this cover. After installing TANAKA TRADING Headlight Cover & Blinker Cover Set it gives
The TANAKA TRADING Headlight Cover & Blinker Cover Set fits perfectly the zoomer. This product is very easy to install and no changes needed to be done to install this cover. After installing TANAKA TRADING Headlight Cover & Blinker Cover Set it gives the zoomer a better look. The shipping of this item was quite fast, I only waited nearly a week to receive this item. View detail
Fits: KAWASAKI zrx1200daeg [daeg]., KAWASAKI zrx1200daeg [daeg].
The Headlight louver (Black) was attached to ZRX1200DAEG. attachment was easy and it only attached it to double-stick tape.Although two Bolts were attached as accessories, it is disagreeable that a hole will be made in a Cowl and it is making
The Headlight louver (Black) was attached to ZRX1200DAEG.
attachment was easy and it only attached it to double-stick tape.Although two Bolts were attached as
accessories, it is disagreeable that a hole will be made in a Cowl and it is making it attachment of only double-stick tape.
I think that it does not separate probably since adhesion of the Tape itself attached to the product from the first is also satisfactory.(Check periodical naturally is carried out.)
When it separates, I think that it is satisfactory with the double-stick tape only for resin currently sold in the Home center.It degreases well in the case of
attachment, and unless it removes and attaches oil (Wax etc.), it does not adhere well.
I think again that it adheres better [ it / to press down and place the sticking portion temporarily (for several minutes) ].
As for an automobile inspection, only one is troublesome.Since it is the parts which influence the quantity of light and an optical axis although the
Louver itself is not an item caught in an automobile inspection, I consider it as it is better to remove at the time of an automobile inspection.I think that the novel Face appropriate for the
Kawasaki becomes more stern, and is very good goods.
View detail
I bought one and based on the promise of elegance and style. I was not disappointed, it looks better than the pictures and fits perfectly. I had a little customized painting done and the bike just get comments of admiration from fellow 250 owners.
I bought one and based on the promise of elegance and style. I was not disappointed, it looks better than the pictures and fits perfectly. I had a little customized painting done and the bike just get comments of admiration from fellow 250 owners. View detail
[Webike Monitor] Although the hole of attachment was the external Cowl shifted well, these goods did not have the problem in particular in the position of a hole, etc. It may be better to have stained the Cowl with the crack, and for that to have bee
[Webike Monitor] Although the hole of
attachment was the external Cowl shifted well, these goods did not have the problem in particular in the position of a hole, etc.
It may be better to have stained the Cowl with the crack, and for that to have been right and for something to cope with it, if it attaches as it is since
back side is fairly rude.
View detail