Motorcycle Fenders Reviews - Webike Thailand

Filter

Write a review and get Webike Points!

Reviews

Fenders DT-01 Bluetooth Headset Clear all

Peyton Place

29 Feb 2024

Stainless Steel/Short Fender

Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500

Japanese Webike user

5/5

Balance between appearance and practicality

I prefer the cooler look, but I was looking for a proper Fender, and I use Payton's Stainless Steel Fender, which has a good balance of looks and practicality. 。

■The Purpose and Role of Fender.
The Fender is the outer plate Parts installed to cover the Tire, and the Parts that cover the front wheels around the front wheels. "Front Fender" We call it "the
The Fender is a large part that prevents mud, sand, small stones, etc. from rolling up from the Tire and hitting the BodyBody or surrounding pedestrians when driving, and also prevents contact between the Tire and pedestrians, etc. to prevent entrapment accidents. In the case of water-cooled Radiator, there is a possibility of foreign objects or damage to the Radiator, so please be careful.

■Non-Mudguard Features ■
Protect foreign objects from being caught in the Tire while driving.
? Protect Inner Tube of Front fork.
Stabilizer effect:By fixing to the front fork, front rigidity can be expected to be increased.

good point
■Material:Stainless, so it is resistant to corrosion.

Stabilizer effect can also be expected.

Stylish appearance, suitable for a cafe racer or an English-style custom.

A bad point
● The length of the fender is a little short, so be careful about mud splattering in the rain.

As a term relative to Fender, "Fender Eliminator I am sure many of you have heard the term
As the name suggests, this is a motorcycle without a fender. Naturally, rain and mud spray will cause the motorcycle body and rider to fly backwards, but it is possible to customize the bike to look stylish.
On the other hand, it is not a recommended customization because mud flies and front strength is reduced. →If possible, it is safer to use the Stabilizer (sold separately).

Incidentally, although it is not illegal to remove the Motorcycle Fender itself, it is necessary to submit a notification to the DMV in advance if the overall length of the vehicle body, etc., is changed as a result.
Car inspection and Fender*.
◎It is possible to pass the vehicle inspection without Front Fender. However, if Custom is judged to be dangerous without Fender, it will fail the vehicle inspection.
◎Cracks and dents also fail the inspection if they are dangerous.
→ Cracks and dents may pass inspection if corrected.

* * * Fenders are not particularly prominent parts, but they make a large contribution to the safety and comfort of motorcyclists and riders.
The design varies from motorcycle to motorcycle, so it is interesting to check what kind of Fender is equipped on each motorcycle. View detail

Iron-Helmet Shaped Fender for Early Model Dax, (Front Side Unpainted)

Puig

20 Feb 2024

Extended Fender (Rear)

Fits: YAMAHA MT-09, YAMAHA MT-09SP

Japanese Webike user

5/5

I think it's a must for Fender Eliminator.

Fender Eliminator and installed because I was concerned about water rolling up from the road surface.

I think the dirt on the back side of the License Plate is better after driving on wet road surfaces.
(I can't look at this quantitatively, it's a personal feeling.)
I feel that the sand, etc. that rolls up to the lower LINK of the Rear suspension in front of the Swing Arm has also become much better. (This is also my personal opinion)

When the OEMFender was not removed, it was difficult to clean, degrease, and drill the holes mentioned below, so I removed the OEMFender.
This is an area that is difficult to check, so be careful. (I will buy OEM Parts from webike again)

Also, when installing, it is necessary to drill holes in the OEMFender, so an electric drill is required, even if it is a cheap one.
The included Double-sided Tape was packed and applied, but since it is a Rivet stop from the above hole drilling, perhaps just a few light layers of tape would have been sufficient.

Also, at first, I was reluctant to drill holes in OEM products, but when I checked the price, it was surprisingly cheap at around 2,000 units, so I did the work without worrying about it (laugh).
For your information. View detail

LighTech

16 Feb 2024

Adjustable License Plate Holder

Fits: YAMAHA MT-09, YAMAHA MT-09 SP

Japanese Webike user

4/5

Refreshing around the Rear

We chose this one because it was Reasonable price than other Fender Eliminator Kit.
First of all, when I first received the product, the holes in the Plate and Bracket did not match, and when I inquired about it, I was told that a different model had been included.

When I actually installed it, I had a hard time removing the OEMFender first.
There is no instruction manual, so I had to loosen the bolt and remove the parts, but there might have been some parts that I didn't have to remove.
The space under the Seat is narrow, so the Coupler for the lights is quite difficult to pull out.

Also, I used a small-sized MONKEY Wrench because the included nut was a size I don't usually use, but I think it would be more efficient to prepare a socket that fits the size.

As for the License Plate Light, I did not want to cut the OEM harness, so I purchased a Coupler that fits there separately and crimped the Bullet Terminal to extend the Cable, but the wiring of the attached License Plate Light is too thin. But the wiring of the attached License Plate Light is too thin, so be careful not to break the cable.
Colgate Tube was used for the wiring path and fixed to the Fender EliminatorBody with inHemp palmac.
The key cylinder of the Seat lock is screwed into the inside of the car body from the side. (I can't help but feel that the Seat lock release has become harder)

Speaking of the seat lock, the OEM dust-proof cover cannot be used, and the keyhole is exposed, so I think countermeasures are necessary.
I process thin rubber sheet and attach it with strong magic tape to make it removable and to prevent mud and dust from entering. (I've only run it a few times, but so far the keyhole is Large strong)

It took a lot of time to install the new product due to various modifications, etc., but it is a recommendation because it looks like a reflection.
(Although this will make the water splashing up behind the Fender a little worse.) View detail

KITACO

15 Feb 2024

Down Fender Bracket Set

Fits: HONDA MONKEY125, HONDA MONKEY125

Japanese Webike user

5/5

Mud Splash Countermeasure

(Photo 1) The front fender is fixed to the black parts under the under bracket of the front fork with three bolts, which can be easily removed from the back of the fender with a ratchet wrench.
(Photo 2) Brackets attached to Fender 。 I also stuck a Fender extension on it to prevent mud splatter. 。 (2) Bracket might be better to put on later.
(Photo 3) BracketQuantity in (1):2pc is Quantity:Pair (for Left and Right) Note that the shape is slightly different in
(Photo 4) When a long Bracket was temporarily fixed with Bolt, the Fender was turned at an angle. 。 I thought maybe the parts were not very precise, but in fact it was because the bracket (2) hit the front side of the arrow part (the part where the brake hose guide was fixed) and was not in the correct position. （In fact, the bracket (2) was not in the correct position because it hit the front of the arrow part (the part where the brake hose guide was fixed).
(Photo 5) Finally, insert the Spanner into the gap between the Tire and Fender, tighten the Bolt from the top and bottom, and you are done.

Back paint was solid and did not peel off during the work. 。 Parts are very accurate, and no heavy lifting was required, nor did the Fender ever turn at an angle. 。 It would be nice if it were a little cheaper, but considering that Bracket has a solid thickness, it is not cosmetic.

As a complaint or rather a request, the Quantity of a long Bracket:Pair (for Left and Right) It would be nice if it says R or L so that it is easy to understand the 。 I thought it would be easier if the long bracket and spacer were welded together, since it took a lot of time to get the bolt through the triangular bracket, long bracket, spacer, and fender during the first temporary assembly.

I have converted to a down fender and attached a fender extension to prevent mud splattering, but I guess it depends on personal preference whether you prefer an up fender or a down fender. 。 By the way, I prefer Up Fender for MONKEY125. View detail