Reviews
I am satisfied
Installed on a CB400SF NC42.
It needed a little bit of modification because of the Engine Guard, but it turned out beautifully.
I have also installed a Center Stand, and it can be installed without interference! However, when I took out the Side Stand, it interfered with the center stand, so I had to modify it.
I am satisfied with the look and feel of the product.
View detail
Parenthesis good ??
I have been looking for a JC61 Grom Under Cowl for a long time and fell in love with SOLID UP's design. I am glad that the price is about the same compared to other Manufactures.
The Instruction Manual was very thorough and easy to understand, and the installation was a breeze!
A necessity for circuit driving! Now you can run with peace of mind. Parenthesis is great for street driving! I am glad I purchased this. I recommend it to everyone♪
It will now be painted the same color as Motorcycle! ^ ^
View detail
Small in size, but large in appearance (installed on a 24-year model)
When purchasing the ZX-6R 24th model, the company considered converting the plastic parts to carbon to improve the quality of the appearance.
After comparing images and videos with the 2011 model, we determined that it could be used for the 24th model and purchased it.
Since CR-1Coating was scheduled to be installed as part of the car delivery maintenance, we brought the car to Kawasaki Plaza to have it installed in its installed condition, and the installation was done without any modification.
There were some comments to Review about poor Fitting, but I have no problems with mine.
Although these are small parts, I think they have a lot of impact in terms of appearance.
View detail
Small parts, but looks like large parts (can be installed in 24 years model).
After comparing images and videos of the '24 and '23 MODELs, I wondered if it would be possible to divert it to the '24 MODEL as well. I asked Kawasaki plaza to install it along with the vehicle maintenance.
As a result, they were able to install it without any modification.
I was concerned because some reviews said the Fitting was not good, but the one I fitted seems to be fine.
Although these are small parts, they give a very different impression when installed.
View detail
Fits: SUZUKI Address 110, SUZUKI ADDRESS110, SUZUKI ADDRESS110, SUZUKI Address 110, SUZUKI Address 110
Replace Handlebar Cover
I had been using a Handlebar Cover, but the poor operability, including the switches, was a drawback. On the way back to work, it is nighttime and there is a mountain pass on the way, so it is necessary to switch the light switch between high and low. This product is OEM and fits well.
The conclusion is that the cold protection is there. The more Speed is on it, the better it works. It looks big. I am worried about the rigidity of the Mirror, because it is attached only at the base of the Mirror.
View detail
Somehow.
I am not sure of the effect of the resistance yet, as I have only purchased the motorcycle and am only breaking it in. I replaced the screws because I only had to replace them for the time being. View detail
I am satisfied
Some of the mounting bolts were obviously too short, but the Motorcycle shop installed them for me, so I was able to get away with it. The footing and tank capacity is a little worse. View detail
Fits: BETA RR 4T 480, BETA RR 4T 430, BETA RR 4T 350, BETA RR 4T 390, BETA RR 2T 300, BETA RR 2T 125, BETA RR 2T 200, BETA RR 2T 250
Exterior is expendable.
I purchased this product to replace a skinny exterior that was used on Race. Since it is a vehicle specific product, the installation went smoothly and the fit was perfect.
Since the exterior is Plain, it is recommended to purchase Decal and paste it.
Depending on the strength of the Decal to be purchased, the exterior itself may be strengthened.
It is better to wash the exterior with Sponge detergent before attaching Decal. (If it's new, it will be oily.)
I've bought it 4 or 5 times now and it's a great product.
View detail
Looks like OEM Product.
We waited a bit, but it was worth the wait.
I think this lack of discomfort is wonderful.
View detail
Expectations for Effectiveness
I didn't feel any inconvenience with OEM parts, but I decided to choose Other Brand Product because Tandem seat has poor parenthesis and Single cover is too expensive. I was expecting to be able to install and remove the OEM parts as described, but the size is too small and the installation is unexpectedly large. I wish it was a little easier to install and remove.
Also, the Seat width is wider, so the footing is obviously worse.
View detail
V-max 1700 under cowl(Twill Carbon)
I ordered it on June 25th... I received a reply that the expected delivery date was October, but I received it approximately 5 months later. Unfortunately, the customs clearance process was complicated, resulting in additional costs and additional freight charges. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50-PRO, HONDA SUPER CUB110, HONDA SUPER CUB110-PRO, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA SUPER CUBC125
Nice retro looks
The visor looks great and feels pretty hefty, seems to be made of a good material. It's easy to install on the bike but do be careful when removing the plastic ring around the headlight... I broke 1 of the tabs inside during the removal but good thing it didn't affect the reinstallation View detail
I am satisfied with Style.
It is a tightened Style.
It is also a perfect match with the Round Type Bar end mirror.
As a screen, it provides protection to the area under the chin at highway speeds and is in a good position to avoid echoes of turbulence hitting the Helmet and causing it to flop around. (By the way, the shoulders are windy, because they are Slim) The wind cutting sound is reduced and when you are tired of the wind cutting sound, you can take a break by getting down.
Since Unpainting. [Color] It needs to be clear or polished. I am using commercial Spray and SurLuster to polish it to a matte finish and see how it looks. The edges are sharp, so I'm thinking of applying rubber molds afterwards.
The installation was a bit of a puzzle since there are no pictures of the installation in the Instruction Manual, so I removed the OEM headlight cowl and placed it over the lower pointed part of the cowl. I was surprised that the lower part of the Screen did not fit when I first put it on.
Installation is done with the included BoltQuantity:It is 2pc and Bolt On just by co-tightening with Headlight cowl. There was no distortion.
View detail
Fits: HONDA CB400SF VTEC, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR REVO, HONDA CB400SF VTEC REVO
CB400SF (NC42) Under Cowl
I am very satisfied with the product (Parts) because I have wanted it for a long time.
Also, the products are carefully packaged for shipping, and the quality of the products is excellent and Exclusive Design,
Easy to install and looks good after installation.
View detail
CHIC DESIGN Road Comet Head cowl
About quality and texture Soild plastic made with the cowl itself and the wind shield About the feeling of use Looks great as I bought the Diablo black paint. The paint is similar as my yellow ball SE version I'm able to fit my Doremi Z2 signal lights. Difficulty of installation Less then 20 mins. Easy to install. I do not need to change my brake bracket as I'm already using Galespeed brake pump. Cost performance and comparison with other products. Great price with painting. Plastic is soild too for the price. About shipping and packaging Shipping is expensive as the item is big but it comes with its own box well wrap. Any concerns, cautions, or advice when purchasing. The top wind screen will be a bit vibranting if traveling in high speed. But bearable and stable enough. I went to a decal shop to install the similar design as the brand to save a bit of cost. Not perfect but still looks great View detail
very very good
easy to install, with installation guide. perfect fit very good, I really want it! and it makes my bike perfect. I really satisfied, and I wanna buy it again if I got new bike. thank you for good item. View detail
perfect item
I really wanna get this parts, Even I have another one. I installed it directly on my bike, It's easy to install, I need just 3m tape. It doesnt have to take off your headlight. Just make a little space, and let it fit. View detail
For those who want to protect the plastic part of the helmet in...
I don't know if it's a fad or a cost-cutting measure, but the ADV is not equipped with this kind of InnerPad, and I was very curious about it.
I thought the price was a little high, but I decided that it was a special part and I had no choice but to purchase it.
In the initial stage, the puka-puka does not seem to Fit slightly, but as it is used, it seems to fit in gradually, but it does not Fit completely.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
For BigFront carriers
I wanted to add a BigFront carrier, so I chose this one.
I used Endurance's Shield in my last car, so I know it's reliable!
View detail
Fits: HONDA Super Cub 50, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO
Easy to use with Fashion
The side cover can now be opened and closed conveniently without tools, and the design is Fashion and Accent. The only problem was that the Gold price was too high and the purchase hurdle was too high. View detail