Reviews
Fits: HONDA CRF250RALLY, HONDA CRF250M, HONDA CRF250L
Protection as expected
For Off-RoadBoots, I bought it because the Frame is damaged.
It looks cheap when viewed on the Single Body, but when installed, it does not bother me.
I chose Silver because the Frame is Silver. I hope the Tie Wrap is also Silver.
The work is easy to do.
View detail
Fits: HONDA CRF250L, HONDA CRF250L S, HONDA CRF250RALLY, HONDA CRF250RALLY S
It is too late after the Frame is rubbed.
While wearing Motocross boots on forest roads and touring, the ankle edges of the frames were rubbing and the paint was peeling. I installed the FrameGuide before it peeled off completely. I wish I had done it sooner. View detail
Easy Texture Up!
[How is it used?
Street Riding Main
Was the one you received as per Image?
It was better than Image.
How was your experience with it?
it's the best
[Points to note]
positioning error when pasting
To be honest, I wasn't looking for texture until I got the product.
In fact, the texture and the look after installation was great!
I got a really good deal.
View detail
Frame scratch prevention
I bought this to prevent the Frame from being damaged by Boots.Color to match the Frame Collar:The base color is Gray, and the Grip is Black with a non-slip material fitted, so there is no discomfort when wearing it.
Installation is easy and the Right Side (Brake Side) The "Others" method uses only one NORMAL screw, while the "Others" method uses an O-ring that is turned on the reverse side of the frame and hooked onto the Protector's mounting hook.
I think it would be best to warm it up with a Dryer or similar to match the curvature of the Frame.
Grip by Boots felt easier, and it was also good to prevent damage to the Frame.
Mud and water can get between the Frame and Protector, so it looks like it should be removed and cleaned periodically.
View detail
Fits: HONDA CRF 450R, HONDA CRF 450RX, HONDA CRF 300RX, HONDA CRF 250RX, HONDA CRF 250R
Grip feeling Up!
[How is it used?
Used on CRF250RX '22 model. frame protector is a frame protector that only reduces scratches and damage to the chassis, but this ACERBIS frame protector has a rubber-like outer surface that improves the grip between the boots and the frame protector. It is an excellent product that also improves the grip between the boots and the frame.
Was the one you received as per Image?
The color is better than I had imagined and looks great.
Was the installation difficult?
The instruction manual, while a bit confusing, is included in the package, so I had no trouble at all.
Resin parts are inserted into the hollowed-out cylindrical part of the body and fixed with Screws. Bind it to the frame with the attached rubber. Is this what you want? But it is very accurate and firm, so it is totally sturdy and large.
How was your experience with it?
The Grip feel is totally different.
The ankles of my boots did not fit the frame properly due to the thickening of the knee side after wearing the knee brace, and I was feeling uncomfortable. With this brace, the fit of the ankle portion has been greatly improved, making it much easier to control!
I should have put it on from the beginning,,,!
Of course it serves its purpose of Guarding the Frame well!
[Included Parts:were they on?
Rubber and Screw for mounting, plastic parts for fixing Screw holder, and ACERBIS Sticker.
[Was there anything that disappointed you?
No, I'm not! I'm so happy!
View detail
Fits: YAMAHA WR 125 2T, YAMAHA WR 250 2T, YAMAHA YZ250, YAMAHA YZ125
Both Boots and Frame can be protected.
When I was riding my YZ125, the Frame and Boots rubbed against each other.
I bought it to keep both Boots and Frame down as they are both coming down.
The frames have not decreased in size, and the boots do not seem to hurt as much because the plastic is softer around the boot.
However, the Frame protector was clearly more sharpened after just one ride.
I thought it needed to be replaced regularly.
I did not feel any particular discomfort in the Knee gripetc. when I rode.
View detail
S1000RR Essentials
I am a Carbon fetishist by nature, and I have been using Fender, Cowl, and other parts as a whole material.:I was only interested in replacing the carbon frame with a cover, and thought that a cover was a bad idea. I was interested only in replacing the Carbon and thought that the Cover was a bad idea. I bought it because I knew it was good for heat protection. The effect was so drastic that even a thin jersey was no problem at all. Even half pants are durable.
I am not comfortable with the cover, but it looks much better, and along with the Carbon parts above and below, it gives me a glaringly glaring feeling that I personally feel three times as much at once, and I am Large satisfied. Everyone should put such a thing on.
As for the quality, the Others, some of them are HPParts, but as for the Under Cowl in the picture, it cost about 300,000. But the surface quality is no different. This is the first time I bought a Chinese product (which is not on HP), but this was the first time for me to buy a Chinese product, and now I have no problem with Chinese products, and I now choose Chinese products.
View detail
Boots slip prevention
Damage prevention for both Off-road boots and Frame. You can Grip without hesitation after installation, and I think the design is good. View detail
I love it
I couldn't help but notice that when I was on
I'm in the habit of holding the body down with my calf.
I thought the Frame paint would come off.
I was trying to divert the Heel Guard from another car.
I was thinking about it, but there are a lot of Frame guard
I found out that it was out there and
It was a shade that didn't stand out too much.
I chose this one.
As for the installation, the Change Pedal side
I felt that the lower part was a little difficult to install.
It was installed without any problems.
The Brake Side was installed in a few minutes, so it was very easy.
If you have tools such as Socket, there should be no problem.
I gave the Change Pedal side 4 stars because there was a gap at the top of the pedal, but the Brake Side was good with no noticeable gap.
The tint is a bit darker than the Frame color, Silver.
I didn't particularly care for it, so I was satisfied with the product in a casual way.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Custom feeling is up!
It looks and feels better than the OEM plastic cover and I am very happy with it.
The custom feeling is also up.
However, the holes did not fit, so a larger hole was needed, for example, by hanging a file. That is Carbon parts.
On the Right Side, it is easier to align the holes if the tank is removed.
In case you are wondering, OEM PlasticQuickRivet is not used (No holes either) It is
View detail
Fits: BETA RR 2T 250 RC, BETA RR 2T 300 RC, BETA RR 4T 350, BETA RR 4T 390, BETA RR 4T 400, BETA RR 4T 430, BETA RR 4T 450, BETA RR 4T 480, BETA RR 4T 498
Very comfortable to use!
I replaced it because it was worn out a lot with the new Boots.
I made a new one with the same one this time because it has a footpeg Grip feel and is friendly to Boots.
View detail
Fits: HONDA CRF450RX, HONDA CRF450R, HONDA CRF250RX, HONDA CRF300RX, HONDA CRF250R
ACERBIS X-GRIP FRAME PROTECTOR Honda CRF 2021
Excellent product.Great quality. It has a Perfect fit and super easy to install.Instructions are clear and should take no more than 10 minutes. View detail
Self-satisfaction + hope for effect...
[How is it used? City Riding - Touring - Circuit - Mountain Pass
Was the one you received as per Image? A beautiful piece of work.
Was the installation difficult? Crimp only with Double-sided Tape
How was your experience with it? Since I have the Rear Sets installed, the Footpeg is higher than the OEM, so the air enters and exits from the right position, so I think it was effective....
[Included Parts:were they on? None
[Was there anything that disappointed you? None
Other items that would be helpful
Point and hang of installation OEM footpeg can be attached to the footpeg! But, it is designed to release air, so there is a risk of hot air hitting your feet. 。 If Rear Sets are included, might they have to be removed and installed?
View detail
be a bit irritated
The Frame cover is a standard Frame cover, so after running and warming up the Frame, you can simply degrease it and apply it quickly and easily.
The function of reducing the heat of the so-called Frame has been achieved, but …...
The cooling Duct, which is a feature of this product, is quite raised here, so something lumpy asserts its presence during Step work. (I am) It bothers me quite a bit, it doesn't bother me when I'm Touring and driving straight.
Also, when you are stuck in a traffic jam, you can only feel the hot air coming up from this hole in the opposite direction, which is a pity Point….
During driving, I have the impression that driving air is sucked out of the Rear cutout by negative pressure, rather than being drawn in from the Duct.
So, although the holes are cool, I can't help but feel that there could have been a little more done to make it more functional.
View detail
Fits: HONDA CRF250RALLY, HONDA CRF250M, HONDA CRF250L
Easy installation
Installation was inexpensive and the price was good.
Also, the Design was good.
View detail
worth it
Not expensive, worth it.They last a long time. Never had any issues with them coming off or getting hung up on anything. Easy to fit. Protect nicely. Nice colors. I recommend it. One thing to note ;they get grippier as they wear.only problem though is you go through zip ties when you are cleaning your bike since dirt will get behind them. Will buy again when the time comes. View detail
Simply affix to heat protection and Custom
What I felt while riding GSX1300R HAYABUSA (EJ11A) is exhaust heat. First of all, my buttocks get hot and the inner ankles of my right leg feel hot. I installed this product in the hope that it would alleviate the latter. I have not driven yet, but I think I can expect some reduction. The work itself was easy, just sticking it on. View detail
Easier ankle gripping
I bought this one because it had a larger area than the OEM one and seemed to be easier to grip.
It is now easier to make an ankle grip when standing.
The edge surface of the Cover is slightly rough and should be sanded.
View detail
It is easy to install.
The Brake Side can be easily attached by hand, but I think it is easier to hang the fixture on the Hook if the Shift Side is hooked onto a Clip or something like a needle gold and pulled. View detail
Installed on New Model GSX1300R HAYABUSA
[How is it used?
Installed on a New Model GSX1300R HAYABUSA to enjoy the Winding.
Was the one you received as per Image?
The Twill Carbon weave is very beautiful.
Was the installation difficult?
It is very easy to stick with double-sided tape.
How was your experience with it?
Even just not touching the Frame directly was quite effective.
Cooling performance also seems to have improved, perhaps thanks to the product's unique Air Intake feature.
[Included Parts:were they on?
Included Parts:Not available.
[Was there anything that disappointed you?
None
View detail